BiPAP Avaps
BiPAP AVAPS C Series is a blower-based ventilatory support system that delivers positive airway pressure through a patient circuit and mask. Its bilevel modes alternate between inspiratory…
BiPAP AVAPS C Series is a blower-based ventilatory support system that delivers positive airway pressure through a patient circuit and mask. Its bilevel modes alternate between inspiratory and expiratory pressure levels, while CPAP mode maintains a fixed pressure.
The system includes a microprocessor-controlled flow generator, an integrated heated humidifier and a display for therapy settings and clinical data. Device alarms alert the user to conditions affecting ventilation.
Listed Item
BiPAP AVAPS C Series Ventilatory Support System, 25 cm, International
Optional Oximetry
With the oximetry module connected, the system records pulse-oximetry and treatment data during therapy. The accessory includes an oximeter sensor, cable and communication module. Data are stored on a removable SD card for clinician review. Ventilator alarms are separate from oximetry measurements.
6manufacturers in China registered for this device type
35catalogue numbers in this listing
12510(k) clearances naming this product code
20recalls on this code
Who Else Makes It
Concentrated in Guangdong (4), Beijing (1), Tianjin (1). 4 of them are registered as contract manufacturers, able to build to a buyer’s own specification.
| Manufacturer | City | Province | Registered as | Device types |
|---|---|---|---|---|
| Modern Medical Equipment Manufacturing Ltd. | Heng Li, Dongguan | Guangdong | Contract manufacturer | 26 |
| Respironics Medical Products (Shenzhen) Co., Ltd. | Shenzhen | Guangdong | Contract manufacturer | 8 |
| BMC (Tianjin) Medical Co., Ltd. | Wuqing District | Tianjin | Contract manufacturer | 3 |
| Huizhou RSP Technology Co., Ltd. | Huizhou | Guangdong | Contract manufacturer | 3 |
| Modern Medical Equipment Manufacturing (Qing Yuan) Ltd | Qing Yuan | Guangdong | Contract manufacturer | 26 |
| BMC Medical Co., Ltd. | Fengtai District | Beijing | Specification developer | 3 |
Record
| Listed by | Respironics Inc., United States |
|---|---|
| FDA product code | MNS |
| Device type | Ventilator, Continuous, Non-Life-Supporting |
| Device class | Class 2 |
| Regulation | 21 CFR 868.5895 |
| Establishment | Specification developer, Repacker / relabeller, Complaint-file establishment, Manufacturer, Exporter |
| 510(k) | K102465 |
| Record published | 2017-01-13 |
| Record revised | 2022-10-24 (version 6) |
Specifications
| MRI safety | Labeling does not contain MRI Safety Information |
|---|---|
| Prescription | Prescription only |
| Label carries | serial number |
| Storage | Storage environment temperature -4 to 140 °F; Storage environment humidity 15 to 95 % RH; Storage environment temperature -20 to 60 °C |
| Packaging | Multipack of 4 |
| Distribution end date | 2023-07-13 |
Catalogue Numbers
| Catalogue number | Size | Status |
|---|---|---|
| BiPAP AVAPS C Series, 30cm, FI | In distribution | |
| 00 | In distribution | |
| BiPAP AVAPS C Series Core Pack, AHP | In distribution | |
| BiPAP AVAPS C Series, 30cm, FR | In distribution | |
| BiPAP AVAPS C Series, AHP | In distribution | |
| BiPAP AVAPS C Series Core Pack w/Heated Tube, AHP | In distribution | |
| 00 | In distribution | |
| 00 | In distribution | |
| BiPAP AVAPS C Series Sapio Belife | In distribution | |
| 00 | In distribution | |
| BiPAP AVAPS C Series, 30CM, ND | In distribution | |
| BiPAP AVAPS C Series, Vitalvent EVO | In distribution | |
| BiPAP AVAPS C Series, 30CM, ES | In distribution | |
| BiPAP AVAPS C Series, 30cm, INTL | In distribution | |
| BiPAP AVAPS C Series, 30cm, PT | In distribution | |
| BiPAP AVAPS C Series, Synchrony | In distribution | |
| BiPAP AVAPS C Series, 25cm, AU | In distribution | |
| BiPAP AVAPS C Series, 30cm, CA | In distribution | |
| BiPAP AVAPS C Series, 30cm, NO | In distribution | |
| 00 | In distribution | |
| BiPAP AVAPS C Series, 30cm, GB | In distribution | |
| 00 | In distribution | |
| 00 | In distribution | |
| BiPAP AVAPS C Series, 30cm, SE | In distribution | |
| BiPAP AVAPS C Series, Private Label, 30cm, INTL | Withdrawn | |
| BiPAP AVAPS C Series, 30cm, CN | Withdrawn | |
| BiPAP AVAPS C Series, 30cm, US | Withdrawn | |
| BiPAP AVAPS C Series Core Pack w/Heated Tube, 30cm, CN | Withdrawn | |
| BiPAP AVAPS C Series, IT | Withdrawn | |
| BiPAP AVAPS C Series Core Pack, Heated Tube, 30cm, CA | Withdrawn | |
| BiPAP AVAPS C Series Core Pack, 30cm, US | Withdrawn | |
| BIPAP AVAPS C Series, 30cm, AU | Withdrawn | |
| BiPAP AVAPS C Series Core Pack w/Heated Tube, 30cm, US | Withdrawn | |
| BiPAP AVAPS C Series, 25cm, INTL | Withdrawn | |
| BiPAP AVAPS C Series Core Pack, 30cm, CN | Withdrawn |
Same Product Code
| Product | Sold by | Catalogue numbers |
|---|---|---|
| DreamStation | Respironics Inc. | 144 |
| AF531 | Respironics Inc. | 53 |
| BiPAP autoSV Advanced System One 60 Series | Respironics Inc. | 44 |
| DreamStation BiPAP Avaps | Respironics Inc. | 30 |
| DreamMapper | Respironics Inc. | 27 |
| BiPAP A30 | Respironics Inc. | 25 |
| BiPAP S/T C-Series | Respironics Inc. | 19 |
| OmniLab Advanced Plus | Respironics Inc. | 19 |
| EncoreAnywhere | Respironics Inc. | 17 |
| DeVilbiss | DeVilbiss Healthcare LLC. | 15 |
| Ventilator, Continuous, Non-Life-Supporting | Salter Labs | 12 |
| DreamStation BiPAP autoSV | Respironics Inc. | 12 |
Showing 12 of 73. All products under Ventilator, Continuous, Non-Life-Supporting
510(K) Clearances
| Clearance | Decision date |
|---|---|
| K113053 | 2012-02-01 |
| K102465 | 2011-03-24 |
| K101130 | 2010-09-02 |
| K092818 | 2010-01-22 |
| K092043 | 2009-08-05 |
| K063540 | 2007-02-22 |
| K063533 | 2007-02-20 |
| K031656 | 2003-07-30 |
| K020777 | 2002-03-20 |
| K012323 | 2001-12-20 |
| K992530 | 2000-03-20 |
| K984407 | 1999-05-19 |
Recalls Naming This Product
1 recall names this product by its own identifier, the 510(k) it is cleared under.
| Recalled by | Identified by | Initiated | FDA class | Root cause | Reason | Quantity |
|---|---|---|---|---|---|---|
| Respironics Inc. | 510(k) number | 2021-06-14 | Class I | Device Design | The polyester-based polyurethane (PE-PUR) foam may degrade into particles which may enter the device s the air pathway and be ingested or inhaled by the user, and the PE-PUR foam may off-gas certain chemicals. | 15,357,775 (10,307,186 in US, 5,039,748 OUS) in total |
Recalls
14 of these are Class I. Class I is the FDA’s most serious grade: a reasonable probability of serious injury or death. Class II means a temporary or reversible health consequence. Volume alone is not a quality signal: a manufacturer that ships more recalls more.
| Initiated | FDA class | Root cause | Reason | Quantity | Closed |
|---|---|---|---|---|---|
| 2025-05-09 | Class I | Device Design | This device does not indicate for use in patients with respiratory failure. | 5,958 units | |
| 2025-05-09 | Class I | Device Design | This device does not indicate for use in patients with respiratory failure. | 3 units in US 22,416 units and 49 units OUS | |
| 2024-04-01 | Class I | Device Design | Device may experience an interruption or loss of therapy in case of a Ventilator Inoperative alarm. This may lead to hypoventilation, mild to severe hypoxemia, hypercarbia, respiratory failure/insufficiency, or potentially death. | 9,388 US; 2,664 ROW | |
| 2024-03-26 | Class I | Device Design | Potential for devices to experience interruption/loss of therapy during a Ventilator Inoperative alarm. This may lead to hypoventilation, mild to severe hypoxemia, hypercarbia, respiratory failure/insufficiency, or potentially death in the | 3 US; 21,414 OUS | |
| 2024-03-26 | Class I | Device Design | Potential for devices to experience interruption/loss of therapy during a Ventilator Inoperative alarm. This may lead to hypoventilation, mild to severe hypoxemia, hypercarbia, respiratory failure/insufficiency, or potentially death in the | 5,958 US; None OUS | |
| 2022-08-26 | Class I | Process control | Motor assemblies manufactured with nonconforming plastic that contributes to off-gassing of VOCs. | 85 units | |
| 2022-08-26 | Class I | Process control | Motor assemblies manufactured with nonconforming plastic that contributes to off-gassing of VOCs. | 34 units ***updated January 2024 *** additional 3 units | |
| 2022-08-26 | Class I | Process control | Motor assemblies manufactured with nonconforming plastic that contributes to off-gassing of VOCs. | 295 units | |
| 2022-08-26 | Class I | Process control | Motor assemblies manufactured with nonconforming plastic that contributes to off-gassing of VOCs. | 1,091 units ***updated Jan 2024*** additional 323 units | |
| 2022-08-26 | Class I | Process control | Motor assemblies manufactured with nonconforming plastic that contributes to off-gassing of VOCs. | 8 units | |
| 2022-08-26 | Class I | Process control | Motor assemblies manufactured with nonconforming plastic that contributes to off-gassing of VOCs. | 146 units ***updated January 2024*** 30 additional units | |
| 2021-06-14 | Class I | Device Design | The polyester-based polyurethane (PE-PUR) foam may degrade into particles which may enter the devices air pathway and be ingested or inhaled by the user, and the PE-PUR foam may off-gas certain chemicals. | 8047 | |
| 2021-06-14 | Class I | Device Design | The polyester-based polyurethane (PE-PUR) foam may degrade into particles which may enter the device s the air pathway and be ingested or inhaled by the user, and the PE-PUR foam may off-gas certain chemicals. | 15,357,775 (10,307,186 in US, 5,039,748 OUS) in total | |
| 2021-06-14 | Class I | Device Design | The polyester-based polyurethane (PE-PUR) foam may degrade into particles which may enter the devices air pathway and be ingested or inhaled by the user, and the PE-PUR foam may off-gas certain chemicals. | 72665 | |
| 2021-04-06 | Class II | Nonconforming Material/Component | Certain devices were built with motor assemblies that could contain non-conforming plastic material. This could result in 1. Exposure to off-gassing of Volatile Organic Compounds not normally present creating a potential biosafety or toxico | 2 units | 2024-01-17 |
| 2021-04-06 | Class II | Nonconforming Material/Component | Certain devices were built with motor assemblies that could contain non-conforming plastic material. This could result in 1. Exposure to off-gassing of Volatile Organic Compounds not normally present creating a potential biosafety or toxico | 22 units | 2024-01-17 |
| 2008-09-22 | Not classified | Component design/selection | Power Supply failures have occurred on some ventilators. A discrepancy between the power supply strain relief clip and the power cord connector may allow unwanted movement of the cord and the unit’s power supply. A disconnection or interm | 2,270 Power Cords | 2010-07-06 |
| 2007-10-15 | Not classified | Environmental control | Foreign material: Glass fragments may present in the plastic bag material used to ship components. | 20950 units | 2009-09-01 |
| 2007-10-15 | Not classified | Environmental control | Foreign material: Glass fragments may present in the plastic bag material used to ship components. | 20950 units | 2009-09-01 |
Source: U.S. FDA establishment registration and device listing records, public domain. Restructured for clarity and searchability. Not affiliated with or endorsed by the FDA. Records are records: nothing here is an offer of sale.