GrebSet® Micro-Introducer Kit

The GrebSet micro-introducer kit is indicated for use in percutaneous introduction and placement of catheters and guidewires.

Registry build 21.09.26
11manufacturers in China registered for this device type
4catalogue numbers in this listing
12510(k) clearances naming this product code
10recalls on this code

Who Else Makes It

Concentrated in Jiangsu (5), Guangdong (3), Zhejiang (2). 4 of them are registered as contract manufacturers, able to build to a buyer’s own specification.

Chinese manufacturers registered for FDA product code DQO
Manufacturer City Province Registered as Device types
GE Medical Systems (China) Co., Ltd. Wuxi Jiangsu Contract manufacturer 57
Amsino Medical (Kunshan) Co., Ltd. Kunshan Jiangsu Contract manufacturer 53
Conod Medical Shuyang Co., Ltd. Shuyang Jiangsu Contract manufacturer 22
Bioxin Medical Co., Ltd. Weihai Shandong Contract manufacturer 8
GRI Medical & Electronic Technology Co., Ltd. Jiaxing Zhejiang Contract manufacturer 71
Goals Sterilization Co., Ltd. Jiaxing Zhejiang Contract manufacturer 26
Wuxi Goals Medical Technology Co., Ltd. Yixing Jiangsu Contract manufacturer 24
Sunny Medical Device (Shenzhen) Co., Ltd. Shenzhen Guangdong Contract manufacturer 11
Curatia Medical Limited Suzhou Jiangsu Specification developer 5
Shenzhen Vivolight Medical Device&Technology Co., Ltd. Shenzhen Guangdong Manufacturer 4
Shenzhen Antmed Co., Ltd. Dongguan Guangdong Manufacturer 4

Record

Regulatory record for GrebSet® micro-introducer kit
Listed by Vascular Solutions LLC, United States
FDA product code DQO
Device type Catheter, Intravascular, Diagnostic
Device class Class 2
Regulation 21 CFR 870.1200
Establishment Contract manufacturer, Specification developer, Repacker / relabeller, Manufacturer
Record published 2016-09-05
Record revised 2024-03-20 (version 7)

Specifications

Specifications
MRI safety Labeling does not contain MRI Safety Information
Supplied sterile Yes
Single use Yes
Prescription Prescription only
Supplied as a kit Yes
Label carries lot or batch number, expiry date
Packaging Box of 10
Sizes Catheter gauge 5 Fr; needle gauge 21 G; length 45 cm
Distribution end date 2022-01-16

Catalogue Numbers

Catalogue numbers for GrebSet® micro-introducer kit
Catalogue number Size Status
7950 Catheter Gauge 5 Fr Withdrawn
7951 Catheter Gauge 5 Fr Withdrawn
7952 Catheter Gauge 5 Fr Withdrawn
7941 Length 45 cm Withdrawn

Same Product Code

Other products under the same FDA product code
Product Sold by Catalogue numbers
Performa® Merit Medical Systems, Inc. 1,101
Impress® Merit Medical Systems, Inc. 839
Super Torque Cordis Corp. 611
Soft-Vu AngioDynamics, Inc. 591
Torcon NB Cook Incorporated 463
Mariner AngioDynamics, Inc. 323
INT,SlideCath Shanghai Kindly Medical Instruments Co., Ltd. 264
Infiniti Cordis Corp. 251
Infiniti Cordis US Corp. 241
AngiOptic AngioDynamics, Inc. 227
Tempo Cordis Corp. 217
SiteSeer™ Medtronic, Inc. 204

Showing 12 of 226. All products under Catheter, Intravascular, Diagnostic

510(K) Clearances

FDA 510(k) clearances naming this product code
Clearance Decision date
K221470 2022-06-17
K170544 2017-11-17
K101625 2010-07-19
K081846 2009-01-28
K073585 2008-04-17
K073200 2008-02-01
K062877 2007-01-18
K062627 2007-01-05
K061565 2006-08-02
K051395 2005-06-24
K050168 2005-05-18
K041909 2004-09-23

Recalls

7 of these are Class I. Class I is the FDA’s most serious grade: a reasonable probability of serious injury or death. Class II means a temporary or reversible health consequence. Volume alone is not a quality signal: a manufacturer that ships more recalls more.

Recalls referencing this product code
Initiated FDA class Root cause Reason Quantity Closed
2020-08-31 Class I Process control The inner lumen of the Langston catheter may separate from the hub during pressure injection. 2990 units 2024-06-18
2020-08-31 Class I Process control The inner lumen of the Langston catheter may separate from the hub during pressure injection. 1,745 units 2024-06-18
2020-08-31 Class I Process control The inner lumen of the Langston catheter may separate from the hub during pressure injection. 89,121 units 2024-06-18
2020-08-31 Class I Process control The inner lumen of the Langston catheter may separate from the hub during pressure injection. 1,680 units 2024-06-18
2020-03-16 Class I Process control The inner lumen of the Langston catheter may separate from the hub during pressure injection. 30,877 units 2024-06-18
2017-01-12 Class II Error in labeling Four Lots of GrebSet Micro-introducer Kits, model 7941, contain guidewires that have a shelf life shorter than the kit expiration date. 633 2018-04-18
2016-09-16 Class I Process control Vascular Solutions is recalling Twin-Pass dual access catheters because there is a potential for excess manufacturing material to remain at the tip of the catheter or within the distal portion of the rapid exchange lumen. 11,670 units total 2018-05-04
2014-05-27 Class I Component design/selection The inner catheter of some Langston V2 Dual Lumen Catheters have separated from the device hub during contrast pressure injections. This may require an intervention to retrieve the separated piece from the patient to prevent injury. 8,580 total (US 5714) 2015-01-30
2011-06-09 Not classified Packaging process control Vascular Solutions, Inc investigation of a recent Device Experience Report has made them aware of a potential problem with their 7F Langston dual lumen pigtail catheter (Model 5515) with lot number 548264.
Recently it was reported that pouc
23 (5 pack) boxes 2012-04-05
2010-09-02 Not classified Process control Investigation of a recent Device Experience Report has made us aware of a potential problem with our 6F Langston dual lumen pigtail catheter (Model 5540) with the following lot numbers: 548110, 548227, 548364, 548430, 548554 & 548723.
Rece
1,128 boxes ( 5pk) 2012-04-24

Source: U.S. FDA establishment registration and device listing records, public domain. Restructured for clarity and searchability. Not affiliated with or endorsed by the FDA. Records are records: nothing here is an offer of sale.

Where China Actually Supplies

Every device page names the company that lists it and the factories registered to make the same thing. These are the sections with the most of them.

5,100manufacturers registered in China
2,581device types they are registered for
340,248device records, each naming its maker
31provinces with a registered manufacturer