PTFE Peelable Introducer Kit
65 catalogue numbers from 667089-402, listed by Greatbatch Medical, United States, under Introducer, Catheter. 13 manufacturers in China are registered for this product code.
13manufacturers in China registered for this device type
65catalogue numbers in this listing
16recalls on this code
Who Else Makes It
Concentrated in Jiangsu (5), Beijing (3), Shanghai (2). 2 of them are registered as contract manufacturers, able to build to a buyer’s own specification.
| Manufacturer | City | Province | Registered as | Device types |
|---|---|---|---|---|
| Mehow Innovative (Huizhou) Ltd. | Huizhou | Guangdong | Contract manufacturer | 11 |
| Tianjin Demax Medical Technology Co., Ltd. | Tianjin | Tianjin | Contract manufacturer | 5 |
| Steris Sterilization Technologies (Suzhou) Ltd | Suzhou | Jiangsu | Contract manufacturer | 44 |
| Shanghai INT Medical Instruments Co., Ltd. | Shanghai | Shanghai | Contract manufacturer | 10 |
| Lepu Medical Technology (Beijing) Co., Ltd. | Beijing | Beijing | Manufacturer | 7 |
| Beijing Target Medical Technologies Inc. | Beijing | Beijing | Contract manufacturer | 7 |
| Beijing Demax Medical Technology Co., Ltd. | Beijing | Beijing | Manufacturer | 5 |
| Curatia Medical Limited | Suzhou | Jiangsu | Specification developer | 5 |
| Tianjin Ethylene Oxide Sterilization Technology Co., Ltd. | Tianjin | Tianjin | Contract manufacturer | 4 |
| Shanghai Microport EP Medtech Co., Ltd. | Shanghai | Shanghai | Manufacturer | 3 |
| Becton Dickinson Medical Devices Co., Ltd. Suzhou | Suzhou | Jiangsu | Contract manufacturer | 2 |
| Cardiocycle Medical(Suzhou) Co., Ltd. | Suzhou | Jiangsu | Complaint-file establishment | 1 |
Showing 12 of 13. All 13 manufacturers in China registered for Introducer, Catheter
Record
| Listed by | Greatbatch Medical, United States |
|---|---|
| FDA product code | DYB |
| Device type | Introducer, Catheter |
| Device class | Class 2 |
| Regulation | 21 CFR 870.1340 |
| Establishment | Contract manufacturer, Specification developer, Complaint-file establishment, Manufacturer |
| Record published | 2018-09-20 |
| Record revised | 2024-03-20 (version 4) |
Specifications
| MRI safety | Labeling does not contain MRI Safety Information |
|---|---|
| Supplied sterile | Yes |
| Single use | Yes |
| Prescription | Prescription only |
| Supplied as a kit | Yes |
| Label carries | lot or batch number, expiry date, manufacturing date |
| Storage | Handling environment temperature up to 40 °C |
| Packaging | Box |
| Sizes | Outer diameter 0.89 to 5.4 mm; length 13.2 to 60 cm; lumen/inner diameter 0.9 to 5.2 mm; length 70 mm; catheter gauge 6 to 16 Fr; needle gauge 18 G; total volume 12 ml; outer diameter 60 cm |
Catalogue Numbers
| Catalogue number | Size | Status |
|---|---|---|
| 667089-402 | Needle Inner Diameter: 0.9 mm | In distribution |
| 10383-006 | Needle Inner Diameter: 0.9 mm | In distribution |
| 1000542-003 | Needle Inner Diameter: 0.9 mm | In distribution |
| 667087-402 | Needle Inner Diameter: 0.9 mm | In distribution |
| 7095 | Outer Diameter 0.89 mm | In distribution |
| 667087-303 | Length 14.2 cm | In distribution |
| 1000558-001 | Needle Inner Diameter: 0.9 mm | In distribution |
| 667129-303 | Outer Diameter 0.89 mm | In distribution |
| 667090-351 | Needle Inner Diameter: 0.9 mm | In distribution |
| 1000558-024 | Needle Inner Diameter: 0.9 mm | In distribution |
| 667097-351 | Needle Inner Diameter: 0.9 mm | In distribution |
| 667099-303 | Outer Diameter 0.89 mm | In distribution |
| 667097-303 | Outer Diameter 0.89 mm | In distribution |
| 10383-001 | Needle Inner Diameter: 0.9 mm | In distribution |
| 7127 | Outer Diameter 0.89 mm | In distribution |
| 667087-351 | Needle Inner Diameter: 0.9 mm | In distribution |
| 667096-303 | Outer Diameter 0.89 mm | In distribution |
| 667127-303 | Outer Diameter 0.89 mm | In distribution |
| 667133-351 | Needle Inner Diameter: 0.9 mm | In distribution |
| 10383-003 | Needle Inner Diameter: 0.9 mm | In distribution |
| 10383-008 | Needle Inner Diameter: 0.9 mm | In distribution |
| 667129-351 | Needle Inner Diameter: 0.9 mm | In distribution |
| 667095-351 | Needle Inner Diameter: 0.9 mm | In distribution |
| 667088-303 | Outer Diameter 0.89 mm | In distribution |
| 667089-303 | Outer Diameter 0.89 mm | In distribution |
| 10383-009 | Needle Inner Diameter: 0.9 mm | In distribution |
| 667096-351 | Needle Inner Diameter: 0.9 mm | In distribution |
| 667131-351 | Needle Inner Diameter: 0.9 mm | In distribution |
| 1000558-016 | Needle Inner Diameter: 0.9 mm | In distribution |
| 7088 | Outer Diameter 0.89 mm | In distribution |
| 10383-004 | Needle Inner Diameter: 0.9 mm | In distribution |
| 667131-303 | Outer Diameter 0.89 mm | In distribution |
| 1000558-022 | Needle Inner Diameter: 0.9 mm | In distribution |
| 667093-351 | Needle Inner Diameter: 0.9 mm | In distribution |
| 667095-402 | Needle Inner Diameter: 0.9 mm | In distribution |
| 667091-303 | Outer Diameter 0.89 mm | In distribution |
| 10383-007 | Needle Inner Diameter: 0.9 mm | In distribution |
| 10383-010 | Needle Inner Diameter: 0.9 mm | In distribution |
| 667097-402 | Needle Inner Diameter: 0.9 mm | In distribution |
| 7093 | Outer Diameter 0.89 mm | In distribution |
| 7089 | Outer Diameter 0.89 mm | In distribution |
| 1000542-007 | Outer Diameter 4.2 mm | In distribution |
| 1000558-014 | Needle Inner Diameter: 0.9 mm | In distribution |
| 1000558-021 | Lumen/Inner Diameter 0.9 mm | In distribution |
| 10383-002 | Needle Inner Diameter: 0.9 mm | In distribution |
| 1000542-001 | Needle Inner Diameter: 0.9 mm | In distribution |
| 7092 | Outer Diameter 0.89 mm | In distribution |
| 1000542-008 | Needle Inner Diameter: 0.9 mm | In distribution |
| 7091 | Outer Diameter 0.89 mm | In distribution |
| 667093-303 | Outer Diameter 0.89 mm | In distribution |
| 667093-402 | Needle Inner Diameter: 0.9 mm | In distribution |
| 1000558-020 | Needle Inner Diameter: 0.9 mm | In distribution |
| 667095-303 | Outer Diameter 0.89 mm | In distribution |
| 1000558-015 | Needle Inner Diameter: 0.9 mm | In distribution |
| 1000542-005 | Needle Inner Diameter: 0.9 mm | In distribution |
| 667089-351 | Needle Inner Diameter: 0.9 mm | In distribution |
| 667090-303 | Outer Diameter 0.89 mm | In distribution |
| 7087 | Outer Diameter 0.89 mm | In distribution |
| 667133-303 | Outer Diameter 0.89 mm | In distribution |
| 667099-351 | Needle Inner Diameter: 0.9 mm | In distribution |
| 7142 | Outer Diameter 0.89 mm | In distribution |
| 667091-402 | Needle Inner Diameter: 0.9 mm | In distribution |
| 667088-351 | Needle Inner Diameter: 0.9 mm | In distribution |
| 1000558-018 | Needle Inner Diameter: 0.9 mm | In distribution |
| 667127-351 | Needle Inner Diameter: 0.9 mm | In distribution |
Same Product Code
| Product | Sold by | Catalogue numbers |
|---|---|---|
| Demax | Beijing Demax Medical Technology Co., Ltd. | 2,841 |
| Arrow | Teleflex Medical LLC | 1,036 |
| Prelude IDeal™ | Merit Medical Systems, Inc. | 294 |
| Fast-Cath™ | St. Jude Medical | 213 |
| Flexor | Cook Incorporated | 182 |
| Prelude Ease™ | Merit Medical Systems, Inc. | 176 |
| Performer | Cook Incorporated | 174 |
| VSI | Teleflex Medical LLC | 154 |
| Peel-Away | Cook Incorporated | 153 |
| OptiSeal™ | Greatbatch Medical | 127 |
| Brilliant | Lepu Medical Technology (Beijing) Co., Ltd. | 122 |
| Super Sheath | Togo Medikit Co., Ltd. | 122 |
Showing 12 of 439. All products under Introducer, Catheter
Recalls
7 of these are Class II. Class II means a temporary or reversible health consequence. Volume alone is not a quality signal: a manufacturer that ships more recalls more.
| Initiated | FDA class | Root cause | Reason | Quantity | Closed |
|---|---|---|---|---|---|
| 2017-02-15 | Class II | Process control | One side of the MobiCath Bi-Directional Guiding Sheath pouch may not be sealed. | 11,360 | 2019-05-09 |
| 2016-11-11 | Class II | Process control | Greatbatch received complaints with the ViaPeel Introducer Sheath 5FR, of handles detaching during use. | 5,000 devices | 2017-11-03 |
| 2016-09-08 | Class II | Process design | Greatbatch Medical has identified an issue with the Stiffer Coaxial Micro-Introducer 4FR and 5FR after a field complaint reported that the rotating luer detached from the dilator hub during use. | 23,075 | 2017-09-08 |
| 2014-04-28 | Class II | Incorrect or no expiration date | Greatbatch identified that the documentation does not support the five-year shelf life of the Bard Access Division Coaxial Micro-Introducer Set. | 6,642 sets (66,420 devices) | 2016-05-24 |
| 2013-05-31 | Class II | Process control | Cordis Corporation, Inc and Greatbatch Medical are recalling one lot of the cordis RADIALSOURCE Spring Wire Transradial Access Kit product. Some units were manufactured with an undersized vessel dilator tip, too small to slide over the gui | 550 kits (OUS) | 2014-08-04 |
| 2012-11-12 | Class II | Nonconforming Material/Component | Greatbatch Medical observed some anomalies of the inner lumen of the MobiCath Bi-Directional Guiding Sheaths upon implementation of a new visual inspection tool. The anomalies may include loose, string-like liner material, liner abrasion ( | 10,201 units | 2014-05-15 |
| 2012-09-24 | Class II | Device Design | We are notifying you of a potential interaction between therapeutic catheters and MobiCath Bi-Directional Guiding Sheaths. We became aware of these interactions while investigating recent complaints regarding catheters “self-advancing” whi | 9040 | 2014-05-15 |
| 2010-07-02 | Not classified | Packaging | The outer sterile barrier (pouch) packaging for the 12 Fr device is not intact. No breaches in the inner sterile barrier (tray/tyvek lid) have been identified. The OptiSeal introducer and accessories sealed in the tray are sterile. Infecti | 211 5-pack boxes | 2011-12-17 |
| 2005-08-31 | Not classified | Other | Enpath has become aware that some of the Enpath Medical 8 Fr Steerable sheath devices may have non-conforming hemostasis valves in that the valve can leak or the valve was observed to have a small hole. | 140 | 2006-07-22 |
| 2003-06-06 | Not classified | Other | Stability testing, after accelerated aging of the device, showed that the handle of device did not meet strength specifications. | 281 boxes | 2004-07-02 |
| 2003-06-06 | Not classified | Other | Stability testing, after accelerated aging of the device, showed that the handle of device did not meet strength specifications. | 20 units | 2004-07-02 |
| 2003-06-06 | Not classified | Other | Stability testing, after accelerated aging of the device, showed that the handle of device did not meet strength specifications. | 14 units | 2004-07-02 |
| 2003-06-06 | Not classified | Other | Stability testing, after accelerated aging of the device, showed that the handle of device did not meet strength specifications. | 601 boxes | 2004-07-02 |
| 2003-06-06 | Not classified | Other | Stability testing, after accelerated aging of the device, showed that the handle of device did not meet strength specifications. | 955 boxes | 2004-07-02 |
| 2003-06-06 | Not classified | Other | Stability testing, after accelerated aging of the device, showed that the handle of device did not meet strength specifications. | 11 boxes | 2004-07-02 |
| 2003-06-06 | Not classified | Other | Stability testing, after accelerated aging of the device, showed that the handle of device did not meet strength specifications. | 2004-07-02 |
Source: U.S. FDA establishment registration and device listing records, public domain. Restructured for clarity and searchability. Not affiliated with or endorsed by the FDA. Records are records: nothing here is an offer of sale.