Oct Implant System

39 catalogue numbers from ITC412, listed by Keystone Dental Inc., United States, under Implant, Endosseous, Root-Form. 7 manufacturers in China are registered for this product code.

Registry build 21.09.26
7manufacturers in China registered for this device type
39catalogue numbers in this listing
5510(k) clearances naming this product code
11recalls on this code

Who Else Makes It

Concentrated in Jiangsu (3), Sichuan (2), Shanghai (1). 5 of them are registered as contract manufacturers, able to build to a buyer’s own specification.

Chinese manufacturers registered for FDA product code DZE
Manufacturer City Province Registered as Device types
Changzhou Biomet Medical Devices Co., Ltd. Changzhou Jiangsu Contract manufacturer 54
LX Precision Shanghai Co Ltd Shanghai Shanghai Contract manufacturer 19
Jiangsu Trausim Medical Instrument Co., Ltd. Changzhou Jiangsu Contract manufacturer 3
Basic (Chengdu) Medical Device Co., Ltd. Chengdu Sichuan Contract manufacturer 1
Dongguan Xinlonghong Hardware Co., Ltd. Dongguan Guangdong Contract manufacturer 1
Chengdu Besmile Medical Technology Co., Ltd. Chengdu Sichuan Manufacturer 14
BIO Concept Co., Ltd. Changzhou Jiangsu Manufacturer 5

Record

Regulatory record for Oct Implant System
Listed by Keystone Dental Inc., United States
FDA product code DZE
Device type Implant, Endosseous, Root-Form
Device class Class 2
Regulation 21 CFR 872.3640
Establishment Complaint-file establishment, Manufacturer, Exporter
Record published 2016-02-04
Record revised 2021-04-07 (version 4)

Specifications

Specifications
MRI safety Labeling does not contain MRI Safety Information
Supplied sterile Yes
Single use Yes
Prescription Prescription only
Latex Labelled latex-free
Label carries lot or batch number, expiry date
Distribution end date 2019-04-26
UDI direct marking Exempt

Catalogue Numbers

Catalogue numbers for Oct Implant System
Catalogue number Size Status
ITC412 Outer Diameter 3.3-9.0mm Withdrawn
ITC310 Outer Diameter 3.3-9.0mm Withdrawn
ITST12D-514 Outer Diameter 3.3-9.0mm Withdrawn
MAXIT8-11 Outer Diameter 3.3-9.0mm Withdrawn
ITT408 Outer Diameter 3.3-9.0mm Withdrawn
ITC510 Outer Diameter 3.3-9.0mm Withdrawn
ITT514 Outer Diameter 3.3-9.0mm Withdrawn
ITC512 Outer Diameter 3.3-9.0mm Withdrawn
ITC312 Outer Diameter 3.3-9.0mm Withdrawn
ITT512 Outer Diameter 3.3-9.0mm Withdrawn
MAXIT7-7 Outer Diameter 3.3-9.0mm Withdrawn
ITC514 Outer Diameter 3.3-9.0mm Withdrawn
MAXIT9-9 Outer Diameter 3.3-9.0mm Withdrawn
MAXIT8-7 Outer Diameter 3.3-9.0mm Withdrawn
ITC306 Outer Diameter 3.3-9.0mm Withdrawn
MAXIT7-9 Outer Diameter 3.3-9.0mm Withdrawn
ITC406 Outer Diameter 3.3-9.0mm Withdrawn
ITC314 Outer Diameter 3.3-9.0mm Withdrawn
ITC508 Outer Diameter 3.3-9.0mm Withdrawn
ITT608 Outer Diameter 3.3-9.0mm Withdrawn
ITST12D-510 Outer Diameter 3.3-9.0mm Withdrawn
ITC506 Outer Diameter 3.3-9.0mm Withdrawn
ITT612 Outer Diameter 3.3-9.0mm Withdrawn
ITT410 Outer Diameter 3.3-9.0mm Withdrawn
ITC414 Outer Diameter 3.3-9.0mm Withdrawn
ITST12D-512 Outer Diameter 3.3-9.0mm Withdrawn
ITT412 Outer Diameter 3.3-9.0mm Withdrawn
ITT508 Outer Diameter 3.3-9.0mm Withdrawn
MAXIT8-9 Outer Diameter 3.3-9.0mm Withdrawn
ITT610 Outer Diameter 3.3-9.0mm Withdrawn
ITC410 Outer Diameter 3.3-9.0mm Withdrawn
MAXIT9-7 Outer Diameter 3.3-9.0mm Withdrawn
ITT414 Outer Diameter 3.3-9.0mm Withdrawn
ITST12D-508 Outer Diameter 3.3-9.0mm Withdrawn
MAXIT9-11 Outer Diameter 3.3-9.0mm Withdrawn
MAXIT7-11 Outer Diameter 3.3-9.0mm Withdrawn
ITC408 Outer Diameter 3.3-9.0mm Withdrawn
ITT510 Outer Diameter 3.3-9.0mm Withdrawn
ITC308 Outer Diameter 3.3-9.0mm Withdrawn

Same Product Code

Other products under the same FDA product code
Product Sold by Catalogue numbers
Neodent Jjgc Indústria e Comércio de Materiais Dentários S.A. 920
Osstem Implant System Osstem Implant Co., Ltd. 788
Magicore InnoBioSurg Co., Ltd.(IBS implant Co., Ltd.) 744
Implant, Endosseous, Root-Form Southern Implants (PTY) Ltd 608
ITL Dental Emery Enterprises Inc. 603
Magicore S InnoBioSurg Co., Ltd.(IBS implant Co., Ltd.) 560
Friadent® Dentsply Implants Manufacturing GmbH 525
Sphero Block Normo Rhein 83 SRL 489
Neobiotech Implant System Neobiotech Co., Ltd. 483
KJ Mini Implant System Kjmeditech.co., Ltd. 448
Ritter Dental Implant System Ritter Implants GmbH & Co. KG 418
Leone SPA Leone SPA 404

Showing 12 of 2,762. All products under Implant, Endosseous, Root-Form

510(K) Clearances

FDA 510(k) clearances naming this product code
Clearance Decision date
K240966 2024-07-09
K223814 2023-05-25
K201334 2020-08-18
K101545 2010-10-28
K071070 2007-10-23

Recalls

10 of these are Class II. Class II means a temporary or reversible health consequence. Class III is unlikely to cause harm at all → typically a labelling or documentation fault. Volume alone is not a quality signal: a manufacturer that ships more recalls more.

Recalls referencing this product code
Initiated FDA class Root cause Reason Quantity Closed
2019-02-22 Class II Process control Paltop Surgical Kits contain 1.25mm Hex Driver(s) which may have a slightly oversized hex driving feature, make it difficult to engage screws and abutments containing the corresponding screw feature 3 hex Driver 2020-06-19
2019-02-22 Class II Process control Paltop Surgical Kits contain 1.25mm Hex Driver(s) which may have a slightly oversized hex driving feature, make it difficult to engage screws and abutments containing the corresponding screw feature 1 hex Driver 2020-06-19
2019-02-22 Class II Process control Paltop Surgical Kits contain 1.25mm Hex Driver(s) which may have a slightly oversized hex driving feature, make it difficult to engage screws and abutments containing the corresponding screw feature 13 kits hex Driver 2020-06-19
2019-02-22 Class II Process control Paltop Surgical Kits contain 1.25mm Hex Driver(s) which may have a slightly oversized hex driving feature, make it difficult to engage screws and abutments containing the corresponding screw feature 3 Hex Driver 2020-06-19
2018-05-01 Class II Error in labeling The implants are mislabeled. 72 2018-09-14
2018-03-13 Class II Error in labeling The surgical cassette contained extra-large white grommets making the 3.8 mm and 6.5mm dental burrs wobble within the grommets in the surgical cassette. 19 2018-07-23
2017-10-16 Class III Labeling mix-ups A locking plastic abutment sleeve, used by dental technicians in dental laboratories to aid in the creation of the final restorative crown, was packed as a non-locking plastic abutment sleeve. 55 2019-04-17
2017-08-25 Class II Error in labeling The recalled units are mislabeled with an incorrect expiration date. The expiration date printed on
the label is 2202-06. The correct expiration date should be 2022-06.
20 2019-04-16
2017-06-16 Class II Unknown/Undetermined by firm An 8mm diameter bone tap was laser marked as 7mm diameter and was packed with a 7mm label. 72 2019-04-16
2017-03-09 Class II Labeling mix-ups Straight PrimaConnex Implants contained Tapered PrimaConnex Implants 59 units 2017-07-05
2016-09-15 Class II Packaging process control Small diameter (SD) cover screw was packaged with the regular diameter implant and do not match the implant diameter (RD) 55 units 2017-01-03

PMA Approvals

A premarket approval is the full Class III route, granted on clinical evidence rather than on equivalence to an existing device. It is the highest regulatory bar a device of this type can clear.

FDA premarket approvals naming this product code
PMA number Decision Trade name Approved to
P800035 2001-10-04 PERI-OSS Curasan AG
P860012 1988-10-28 ALVEOFORM TM BIOGRAFT Collagen Corp.

Source: U.S. FDA establishment registration and device listing records, public domain. Restructured for clarity and searchability. Not affiliated with or endorsed by the FDA. Records are records: nothing here is an offer of sale.

Where China Actually Supplies

Every device page names the company that lists it and the factories registered to make the same thing. These are the sections with the most of them.

5,100manufacturers registered in China
2,581device types they are registered for
340,248device records, each naming its maker
31provinces with a registered manufacturer