Certain® Bellatek®
Certain® Bellatek® Titanium Abutment 5.0MM
15manufacturers in China registered for this device type
40catalogue numbers in this listing
40recalls on this code
Who Else Makes It
Concentrated in Guangdong (11), Jiangsu (2), Shanghai (1). 10 of them are registered as contract manufacturers, able to build to a buyer’s own specification.
| Manufacturer | City | Province | Registered as | Device types |
|---|---|---|---|---|
| LX Precision Shanghai Co Ltd | Shanghai | Shanghai | Contract manufacturer | 19 |
| Modern Dental Laboratory (DG) Co., Ltd. | Dongguan | Guangdong | Contract manufacturer | 15 |
| Exceldent Dental Technology Development Co., Ltd. | Zhuhai | Guangdong | Contract manufacturer | 12 |
| DTS Digital Dental LAB | Shenzhen | Guangdong | Contract manufacturer | 11 |
| KTJ Medical Technology Co., Ltd. | Shenzhen | Guangdong | Contract manufacturer | 11 |
| Shimmer Computerized Dental Technology Co., Ltd. | Zhuhai | Guangdong | Contract manufacturer | 10 |
| Zhuhai Crystal Dental Technology Co., Ltd. | Zhuhai | Guangdong | Contract manufacturer | 9 |
| NEW Perfect Dental LAB | Shenzhen | Guangdong | Contract manufacturer | 8 |
| Shenzhen Jiahong Dental Technology Co., Ltd. | Shenzhen | Guangdong | Contract manufacturer | 7 |
| Jiangsu Trausim Medical Instrument Co., Ltd. | Changzhou | Jiangsu | Contract manufacturer | 3 |
| Chengdu Besmile Medical Technology Co., Ltd. | Chengdu | Sichuan | Manufacturer | 14 |
| CBD Dental LAB, Inc | Shenzhen | Guangdong | Manufacturer | 11 |
Showing 12 of 15. All 15 manufacturers in China registered for Abutment, Implant, Dental, Endosseous
Record
| Listed by | ZimVie US Corp LLC, United States |
|---|---|
| FDA product code | NHA |
| Device type | Abutment, Implant, Dental, Endosseous |
| Device class | Class 2 |
| Regulation | 21 CFR 872.3630 |
| Establishment | Contract manufacturer, Specification developer, Repacker / relabeller, Complaint-file establishment, Manufacturer, Exporter |
| Record published | 2015-09-03 |
| Record revised | 2026-01-15 (version 7) |
Specifications
| MRI safety | MR Conditional |
|---|---|
| Sterilisation | Moist Heat or Steam Sterilization |
| Single use | Yes |
| Prescription | Prescription only |
| Label carries | lot or batch number |
Catalogue Numbers
| Catalogue number | Size | Status |
|---|---|---|
| IIAN3 | Diameter 3.4 mm | In distribution |
| ISAT5 | Diameter 5 mm | In distribution |
| IEDAN3 | Diameter 3.4 mm | In distribution |
| ISAN5 | Diameter 5 mm | In distribution |
| ISAN6 | Diameter 6 mm | In distribution |
| IIAT5 | Diameter 5 mm | In distribution |
| IIAN4 | Diameter 4.1 mm | In distribution |
| IEDAT5 | Diameter 5 mm | In distribution |
| ILDAT6 | Diameter 6 mm | In distribution |
| ILDAN5 | Diameter 5 mm | In distribution |
| IEDAN5 | Diameter 5 mm | In distribution |
| IEDAT3 | Diameter 3.4 mm | In distribution |
| I3MAT5 | Diameter 5 mm | In distribution |
| ILDAT3 | Diameter 3.4 mm | In distribution |
| I3MAN6 | Diameter 6 mm | In distribution |
| ILDAN6 | Diameter 6 mm | In distribution |
| ISAN4 | Diameter 4.1 mm | In distribution |
| I3MAT3 | Diameter 3.4 mm | In distribution |
| I3MAT4 | Diameter 4.1 mm | In distribution |
| ISAT3 | Diameter 3.4 mm | In distribution |
| ISAT4 | Diameter 4.1 mm | In distribution |
| I3MAN4 | Diameter 4 mm | In distribution |
| IEDAN4 | Diameter 4.1 mm | In distribution |
| IIAN6 | Diameter 6 mm | In distribution |
| IIAT6 | Diameter 6 mm | In distribution |
| ISAT6 | Diameter 6 mm | In distribution |
| ISAN3 | Diameter 3.4 mm | In distribution |
| IEDAN6 | Diameter 6 mm | In distribution |
| IIAT3 | Diameter 3.4 mm | In distribution |
| IIAT4 | Diameter 4.1 mm | In distribution |
| ILDAN4 | Diameter 4.1 mm | In distribution |
| ILDAT5 | Diameter 5 mm | In distribution |
| ILDAN3 | Diameter 3.4 mm | In distribution |
| IEDAT6 | Diameter 6 mm | In distribution |
| ILDAT4 | Diameter 4.1 mm | In distribution |
| IEDAT4 | Diameter 4.1 mm | In distribution |
| I3MAN3 | Diameter 3.4 mm | In distribution |
| IIAN5 | Diameter 5 mm | In distribution |
| I3MAN5 | Diameter 5 mm | In distribution |
| I3MAT6 | Diameter 6 mm | In distribution |
Same Product Code
| Product | Sold by | Catalogue numbers |
|---|---|---|
| MEDENTiKA | Medentika GmbH | 2,553 |
| LW Vis Abutment | Ossvis Co., Ltd. | 2,520 |
| Dess dental smart solutions | Terrats Medical SL | 1,715 |
| Locator | Zest Anchors, LLC | 1,643 |
| NobelProcera® | Nobel Biocare AB | 1,526 |
| Azure | Terrats Medical SL | 1,360 |
| Neodent | Jjgc Indústria e Comércio de Materiais Dentários S.A. | 1,308 |
| LW Vis Abutment SET | Ossvis Co., Ltd. | 1,260 |
| Abutment, Implant, Dental, Endosseous | Southern Implants (PTY) Ltd | 1,240 |
| Healing Abutment | Megagen Implant Co., Ltd. | 1,218 |
| Chaorum Implant System | Medimecca Co Ltd | 1,084 |
| OT Equator | Rhein 83 SRL | 1,051 |
Showing 12 of 6,204. All products under Abutment, Implant, Dental, Endosseous
Recalls Naming This Product
10 recalls name this product by its own identifiers, the UDI on its label.
| Recalled by | Identified by | Initiated | FDA class | Root cause | Reason | Quantity | Closed |
|---|---|---|---|---|---|---|---|
| ZimVie US Corp LLC | UDI-DI | 2020-08-31 | Class II | Device Design | Hex of the BellaTek Encode Definitive Abutments was misaligned by 30 degrees during manufacturing as compared with the provided patient scan data (Images may cause misalignment, the definitive abutment will not seat in the correct orientati | 9 units | 2022-07-06 |
| ZimVie US Corp LLC | UDI-DI | 2020-08-31 | Class II | Device Design | Hex of the BellaTek Encode Definitive Abutments was misaligned by 30 degrees during manufacturing as compared with the provided patient scan data (Images may cause misalignment, the definitive abutment will not seat in the correct orientati | 4 units | 2022-07-06 |
| ZimVie US Corp LLC | UDI-DI | 2020-08-31 | Class II | Device Design | Hex of the BellaTek Encode Definitive Abutments was misaligned by 30 degrees during manufacturing as compared with the provided patient scan data (Images may cause misalignment, the definitive abutment will not seat in the correct orientati | 35 units | 2022-07-06 |
| ZimVie US Corp LLC | UDI-DI | 2020-08-31 | Class II | Device Design | Hex of the BellaTek Encode Definitive Abutments was misaligned by 30 degrees during manufacturing as compared with the provided patient scan data (Images may cause misalignment, the definitive abutment will not seat in the correct orientati | 10 units | 2022-07-06 |
| ZimVie US Corp LLC | UDI-DI | 2020-08-31 | Class II | Device Design | Hex of the BellaTek Encode Definitive Abutments was misaligned by 30 degrees during manufacturing as compared with the provided patient scan data (Images may cause misalignment, the definitive abutment will not seat in the correct orientati | 1 unit | 2022-07-06 |
| ZimVie US Corp LLC | UDI-DI | 2019-02-26 | Class II | Process control | During manufacturing, the screw stop ledge was not made to specification and location within the abutment, resulting in the screw head seating deeper in the abutment with no positive stop. | 3 units | 2020-06-15 |
| ZimVie US Corp LLC | UDI-DI | 2019-02-26 | Class II | Process control | During manufacturing, the screw stop ledge was not made to specification and location within the abutment, resulting in the screw head seating deeper in the abutment with no positive stop. | 17 units | 2020-06-15 |
| ZimVie US Corp LLC | UDI-DI | 2019-02-26 | Class II | Process control | During manufacturing, the screw stop ledge was not made to specification and location within the abutment, resulting in the screw head seating deeper in the abutment with no positive stop. | 6 units | 2020-06-15 |
| ZimVie US Corp LLC | UDI-DI | 2019-02-26 | Class II | Process control | During manufacturing, the screw stop ledge was not made to specification and location within the abutment, resulting in the screw head seating deeper in the abutment with no positive stop. | 2 units | 2020-06-15 |
| ZimVie US Corp LLC | UDI-DI | 2019-02-26 | Class II | Process control | During manufacturing, the screw stop ledge was not made to specification and location within the abutment, resulting in the screw head seating deeper in the abutment with no positive stop. | 49 units | 2020-06-15 |
Recalls
30 of these are Class II. Class II means a temporary or reversible health consequence. Volume alone is not a quality signal: a manufacturer that ships more recalls more.
| Initiated | FDA class | Root cause | Reason | Quantity | Closed |
|---|---|---|---|---|---|
| 2020-08-31 | Class II | Device Design | Hex of the BellaTek Encode Definitive Abutments was misaligned by 30 degrees during manufacturing as compared with the provided patient scan data (Images may cause misalignment, the definitive abutment will not seat in the correct orientati | 7 stand alone units | 2022-07-06 |
| 2020-08-31 | Class II | Device Design | Hex of the BellaTek Encode Definitive Abutments was misaligned by 30 degrees during manufacturing as compared with the provided patient scan data (Images may cause misalignment, the definitive abutment will not seat in the correct orientati | 2 units | 2022-07-06 |
| 2020-01-10 | Class II | Process control | Resulting impression or scanned data produced from the Healing Abutment lots will result in an incorrect rotation of approximately 30 degrees and/or margin contour misalignment | 2021-08-02 | |
| 2020-01-10 | Class II | Process control | Resulting impression or scanned data produced from the Healing Abutment lots will result in an incorrect rotation of approximately 30 degrees and/or margin contour misalignment | 2021-08-02 | |
| 2020-01-10 | Class II | Process control | Resulting impression or scanned data produced from the Healing Abutment lots will result in an incorrect rotation of approximately 30 degrees and/or margin contour misalignment | 2021-08-02 | |
| 2020-01-10 | Class II | Process control | Resulting impression or scanned data produced from the Healing Abutment lots will result in an incorrect rotation of approximately 30 degrees and/or margin contour misalignment | 2021-08-02 | |
| 2020-01-10 | Class II | Process control | Resulting impression or scanned data produced from the Healing Abutment lots will result in an incorrect rotation of approximately 30 degrees and/or margin contour misalignment | 2021-08-02 | |
| 2020-01-10 | Class II | Process control | Resulting impression or scanned data produced from the Healing Abutment lots will result in an incorrect rotation of approximately 30 degrees and/or margin contour misalignment | 2021-08-02 | |
| 2020-01-10 | Class II | Process control | Resulting impression or scanned data produced from the Healing Abutment lots will result in an incorrect rotation of approximately 30 degrees and/or margin contour misalignment | 2021-08-02 | |
| 2020-01-10 | Class II | Process control | Resulting impression or scanned data produced from the Healing Abutment lots will result in an incorrect rotation of approximately 30 degrees and/or margin contour misalignment | 2021-08-02 | |
| 2020-01-10 | Class II | Process control | Resulting impression or scanned data produced from the Healing Abutment lots will result in an incorrect rotation of approximately 30 degrees and/or margin contour misalignment | 2021-08-02 | |
| 2020-01-10 | Class II | Process control | Resulting impression or scanned data produced from the Healing Abutment lots will result in an incorrect rotation of approximately 30 degrees and/or margin contour misalignment | 2021-08-02 | |
| 2020-01-10 | Class II | Process control | Resulting impression or scanned data produced from the Healing Abutment lots will result in an incorrect rotation of approximately 30 degrees and/or margin contour misalignment | 2021-08-02 | |
| 2020-01-10 | Class II | Process control | Resulting impression or scanned data produced from the Healing Abutment lots will result in an incorrect rotation of approximately 30 degrees and/or margin contour misalignment | 2021-08-02 | |
| 2020-01-10 | Class II | Process control | Resulting impression or scanned data produced from the Healing Abutment lots will result in an incorrect rotation of approximately 30 degrees and/or margin contour misalignment | 2021-08-02 | |
| 2020-01-10 | Class II | Process control | Resulting impression or scanned data produced from the Healing Abutment lots will result in an incorrect rotation of approximately 30 degrees and/or margin contour misalignment | 2021-08-02 | |
| 2020-01-10 | Class II | Process control | Resulting impression or scanned data produced from the Healing Abutment lots will result in an incorrect rotation of approximately 30 degrees and/or margin contour misalignment | 2021-08-02 | |
| 2020-01-10 | Class II | Process control | Resulting impression or scanned data produced from the Healing Abutment lots will result in an incorrect rotation of approximately 30 degrees and/or margin contour misalignment | 2021-08-02 | |
| 2020-01-10 | Class II | Process control | Resulting impression or scanned data produced from the Healing Abutment lots will result in an incorrect rotation of approximately 30 degrees and/or margin contour misalignment | 2021-08-02 | |
| 2020-01-10 | Class II | Process control | Resulting impression or scanned data produced from the Healing Abutment lots will result in an incorrect rotation of approximately 30 degrees and/or margin contour misalignment | 2021-08-02 | |
| 2020-01-10 | Class II | Process control | Resulting impression or scanned data produced from the Healing Abutment lots will result in an incorrect rotation of approximately 30 degrees and/or margin contour misalignment | 2021-08-02 | |
| 2020-01-10 | Class II | Process control | Resulting impression or scanned data produced from the Healing Abutment lots will result in an incorrect rotation of approximately 30 degrees and/or margin contour misalignment | 2021-08-02 | |
| 2020-01-10 | Class II | Process control | Resulting impression or scanned data produced from the Healing Abutment lots will result in an incorrect rotation of approximately 30 degrees and/or margin contour misalignment | 2021-08-02 | |
| 2020-01-10 | Class II | Process control | Resulting impression or scanned data produced from the Healing Abutment lots will result in an incorrect rotation of approximately 30 degrees and/or margin contour misalignment | 2021-08-02 | |
| 2020-01-10 | Class II | Process control | Resulting impression or scanned data produced from the Healing Abutment lots will result in an incorrect rotation of approximately 30 degrees and/or margin contour misalignment | 2021-08-02 | |
| 2016-09-14 | Class II | Employee error | A limited number of product pouches may not have been sealed during packaging. | 525 | 2019-07-26 |
| 2016-09-14 | Class II | Employee error | A limited number of product pouches may not have been sealed during packaging. | 108 | 2019-07-26 |
| 2016-09-14 | Class II | Employee error | A limited number of product pouches may not have been sealed during packaging. | 735 | 2019-07-26 |
| 2016-09-14 | Class II | Employee error | A limited number of product pouches may not have been sealed during packaging. | 123 | 2019-07-26 |
| 2016-09-14 | Class II | Employee error | A limited number of product pouches may not have been sealed during packaging. | 160 | 2019-07-26 |
Source: U.S. FDA establishment registration and device listing records, public domain. Restructured for clarity and searchability. Not affiliated with or endorsed by the FDA. Records are records: nothing here is an offer of sale.