NON-Locking Cortical TAP
Catalogue number 2141-16-000, listed by Biomet Orthopedics, United States, under Bit, Drill. 27 manufacturers in China are registered for this product code.
Epix Lateral Cortex Drill
Catalogue number 5000-00255, listed by Epix Orthopaedics Inc., under Bit, Drill. 27 manufacturers in China are registered for this product code.
G Source
Catalogue number gS 86.8415, listed by Provision, under Bit, Drill. 27 manufacturers in China are registered for this product code.
2.5MM Side Cutting Drill BIT
Catalogue number 466118, listed by Biomet Orthopedics, United States, under Bit, Drill. 27 manufacturers in China are registered for this product code.
Removal Drill, 13.0 Mm
A cannulated drill bit that attaches to a surgical power tool. It is used over a guide pin to remove bone leading up to or covering the proximal head of a CurvaFix Implant.
Reprocessed 2.0mm Cannulated Hex Driver
Catalogue number HT-1120, listed by Suretek Medical, United States, under Bit, Drill. 27 manufacturers in China are registered for this product code.
Keyfix Bone Drill 9g
Catalogue number 900204, listed by G21 SRL, under Bit, Drill. 27 manufacturers in China are registered for this product code.
Reprocessed 4.0mm Drill, Green Stripe, Cannulated
Catalogue number OS900038, listed by Suretek Medical, United States, under Bit, Drill. 27 manufacturers in China are registered for this product code.
Cervical Drill Revision With Stop L22
Catalogue number GN0104D222, listed by Spineup Inc, United States, under Bit, Drill. 27 manufacturers in China are registered for this product code.
7.00 Mm Navigation Drill, Cannulated
Catalogue number 501122-0700, listed by SI-Bone, Inc., United States, under Bit, Drill. 27 manufacturers in China are registered for this product code.
Cervical Tap Primary With Stop L14
Catalogue number GN0056T114, listed by Spineup Inc, United States, under Bit, Drill. 27 manufacturers in China are registered for this product code.
3.2 X 300 Mm Surgibit Drill
Catalogue number 192-11-0232, listed by Signature Orthopaedics PTY Limited, Australia, under Bit, Drill. 27 manufacturers in China are registered for this product code.
Spiral Drill, Cannulated, Large AO Connector, D=6.2mm, L=420mm
Catalogue number 61620-420, listed by I.T.S. Gmbh, Austria, under Bit, Drill. 27 manufacturers in China are registered for this product code.
Cannulated Countersink
Catalogue number 2141-42-000, listed by Biomet Orthopedics, United States, under Bit, Drill. 27 manufacturers in China are registered for this product code.
Ball Joint Tap With Stop D3.5xL11
Catalogue number RO2103V111, listed by Spineup Inc, United States, under Bit, Drill. 27 manufacturers in China are registered for this product code.
Reprocessed 2.5mm Drill Bit, 19mm
Catalogue number 5110-100-25, listed by Suretek Medical, United States, under Bit, Drill. 27 manufacturers in China are registered for this product code.
MG II®
Catalogue number 5120-85, listed by Zimmer, Inc., United States, under Bit, Drill. 27 manufacturers in China are registered for this product code.
Cannulated Drill 4.04.5MM
Catalogue number 19142, listed by Biopro, Inc., United States, under Bit, Drill. 27 manufacturers in China are registered for this product code.
Calibrated Drill 5.0MM X 365MM
Catalogue number 27982, listed by Biomet Orthopedics, United States, under Bit, Drill. 27 manufacturers in China are registered for this product code.
Smith & Nephew
Catalogue number 71631121, listed by Provision, under Bit, Drill. 27 manufacturers in China are registered for this product code.
Cannulated Drill Sterile 2.02.5MM
Catalogue number 19234, listed by Biopro, Inc., United States, under Bit, Drill. 27 manufacturers in China are registered for this product code.
AT 2.5 Drill – Lateral
AT 2.5 Drill - Lateral: 1 catalogue number listed by T.A.G Medical Products Agricultural Cooperative Association, under Bit, Drill. 27 manufacturers in China are registered for this product code.
Reprocessed 2.7mm Cannulated Drill Bit, 160mm
Catalogue number 310.67, listed by Suretek Medical, United States, under Bit, Drill. 27 manufacturers in China are registered for this product code.
Calibrated 4.5MM X 250MM
Catalogue number 27555, listed by Biomet Orthopedics, United States, under Bit, Drill. 27 manufacturers in China are registered for this product code.
Reprocessed 2.7mm Solid Quick Connect Twist Drill
Catalogue number KM166-310-28, listed by Suretek Medical, United States, under Bit, Drill. 27 manufacturers in China are registered for this product code.
Cannulated Drill Kit, 4.5mm
Catalogue number CDK 045, listed by Flower Orthopedics Corporation, United States, under Bit, Drill. 27 manufacturers in China are registered for this product code.
Cervical Drill Primary With Stop L17
Catalogue number GN0079D117, listed by Spineup Inc, United States, under Bit, Drill. 27 manufacturers in China are registered for this product code.
Pullup
PULLUP® Ø 4.5 mm cannulated drill bit, to be used with PULLUP and BT LOOP adjustable fixation devices for ACL reconstruction.
6.0 X 230 Mm Surgibit Drill
Catalogue number 192-11-0160, listed by Signature Orthopaedics PTY Limited, Australia, under Bit, Drill. 27 manufacturers in China are registered for this product code.
Ball Joint Tap With Stop D3.5xL19
Catalogue number RO2111V119, listed by Spineup Inc, United States, under Bit, Drill. 27 manufacturers in China are registered for this product code.
Straight Pin 3.15 X 63 Mm
Catalogue number 192-162-013, listed by Signature Orthopaedics PTY Limited, Australia, under Bit, Drill. 27 manufacturers in China are registered for this product code.
Power Driver G-Wire Kit, 5.5-7.3mm Cannulated Screws
Catalogue number FIM 025, listed by Flower Orthopedics Corporation, United States, under Bit, Drill. 27 manufacturers in China are registered for this product code.
Reprocessed 1.1mm Drill Bit, QC, 60mm
Catalogue number 310.11, listed by Suretek Medical, United States, under Bit, Drill. 27 manufacturers in China are registered for this product code.
F.a.s.t. Guide®
Catalogue number 2312-01-301, listed by Biomet Orthopedics, United States, under Bit, Drill. 27 manufacturers in China are registered for this product code.
Reprocessed 2.5mm Drill Bit, Cannulated
Catalogue number AR-8737-09, listed by Suretek Medical, United States, under Bit, Drill. 27 manufacturers in China are registered for this product code.
Lag Screw Kit, 2.0mm
Catalogue number LSK 020, listed by Flower Orthopedics Corporation, United States, under Bit, Drill. 27 manufacturers in China are registered for this product code.
Reprocessed 5.5mm Cannulated Drill Bit, 210mm L
Catalogue number 119174ND, listed by Suretek Medical, United States, under Bit, Drill. 27 manufacturers in China are registered for this product code.