28a Roll in Cot

28A Roll In Cot, Aero

Registry build 21.09.26
31manufacturers in China registered for this device type
1catalogue number
2510(k) clearances naming this product code
11recalls on this code

Who Else Makes It

Concentrated in Jiangsu (15), Hebei (7), Guangdong (6). 2 of them are registered as contract manufacturers, able to build to a buyer’s own specification.

Chinese manufacturers registered for FDA product code FPO
Manufacturer City Province Registered as Device types
Hengshui Gangsheng Medical Instruments Co., Ltd. Hengshui Hebei Contract manufacturer 36
Zhangjiagang Xiehe Medical Apparatus & Instruments Co., Ltd. Zhangjiagang Jiangsu Contract manufacturer 11
Hospital & Homecare IMP. & EXP. Co., Ltd. Nanjing Jiangsu Contract manufacturer 179
Danyang NEW Hope Medical Equipment Co., Ltd. Danyang Jiangsu Manufacturer 38
Jiangsu Saikang Medical Equipment Co., Ltd. Zhangjiagang Jiangsu Contract manufacturer 34
Jiangsu Yongfa Medical Equipment Technology Co., Ltd. Zhangjiagang Jiangsu Manufacturer 33
Shanghai NO. 2 Medical College Duhang Medical Equipment Factory Shanghai Shanghai Contract manufacturer 32
Jiangsu Rooe Medical Technology Co., Ltd. Zhangjiagang Jiangsu Manufacturer 31
Better Medical Technology Co., Ltd. Foshan Guangdong Manufacturer 24
Shenyang Ourpromise Medical Equipment Co., Ltd. Shenyang Liaoning Manufacturer 24
Foshan Fuzikon Medical Technology Co., Ltd. Foshan Guangdong Manufacturer 21
Jiangsu Sintang Health&Technology Co., Ltd. Yancheng Jiangsu Manufacturer 21

Showing 12 of 31. All 31 manufacturers in China registered for Stretcher, Wheeled

Record

Regulatory record for 28A Roll In Cot
Listed by Ferno-Washington, Inc., United States
FDA product code FPO
Device type Stretcher, Wheeled
Device class Class 2
Regulation 21 CFR 880.6910
Establishment Specification developer, Repacker / relabeller, Complaint-file establishment, Manufacturer
Premarket notification Exempt
Record published 2016-08-22
Record revised 2018-03-29 (version 2)

Specifications

Specifications
MRI safety Labeling does not contain MRI Safety Information
Label carries manufacturing date, serial number

Catalogue Numbers

Catalogue numbers for 28A Roll In Cot
Catalogue number Size Status
0063099 In distribution

Same Product Code

Other products under the same FDA product code
Product Sold by Catalogue numbers
Sechrist Industries, Inc. Sechrist Industries, Inc. 51
Stretcher, Wheeled Gendron, Inc. 40
Stretcher, Wheeled Stryker GmbH 35
Havasu Stryker GmbH 29
MJM 900 Series Gurney M J M International Corporation 27
Sprint 100 L I N E T spol. s r.o. 27
Hausted GF Health Products, Inc 24
Mondial® Monobloc Ferno-Washington, Inc. 24
Mondial® Transporter Ferno-Washington, Inc. 20
Prime Series Stryker GmbH 18
Pedigo Products, Inc. Pedigo Products, Inc. 15
Zephyr Patient Stretcher Diacor, Inc. 14

Showing 12 of 182. All products under Stretcher, Wheeled

510(K) Clearances

FDA 510(k) clearances naming this product code
Clearance Decision date
K864269 1986-11-13
K862441 1986-09-12

Recalls

7 of these are Class II. Class II means a temporary or reversible health consequence. Volume alone is not a quality signal: a manufacturer that ships more recalls more.

Recalls referencing this product code
Initiated FDA class Root cause Reason Quantity Closed
2026-06-19 Class II Process control Product may experience accelerated roller wear and potential deformation due to interference between the roller assembly and rail. In the worst-case condition, rail mechanism may become lodged during operation and movement of the stretcher 278
2025-09-11 Class II Device Design The fastening post hardware could loosen allowing the fastening post to detach from the cot 138 units
2022-10-07 Class II Component design/selection Batteries could become unstable when not properly maintained and/or subjected to repeated drops, power washing directly into battery contacts or abuse, may result in a fire and/or injury 1,922 units
2017-03-08 Class II Mixed-up of materials/components The recall was initiated as a result of the detection of an incorrect nut used in manufacturing. 34 units 2017-06-29
2015-08-03 Class II Device Design Hole elongation in the telescoping load frame channel. A hole elongation could affect the ability of the retention pin to stay seated which is necessary to preclude movement of the telescoping load frame. 72 units 2016-01-20
2015-05-01 Class II Process control The firm discovered an improperly installed set screw in one caster arm assembly on a unit in production. The screw assists in preventing the bearing cup on the caster assembly from backing out of the caster arm during use. 26 units 2015-11-06
2014-12-03 Class II Mixed-up of materials/components The wheel castor assemblies may be loosening on the stretchers. 46 units 2015-12-01
2008-09-03 Not classified Device Design The Ferno Model 35-X PROFlexx legs could experience metal fatigue and possibly fracture after one to two years of use based on the usage and method of operation. 2,100 2012-09-27
2008-04-29 Not classified Mixed-up of materials/components A component defect was found in corner castings of the firm’s wheeled ambulance stretchers. Some corner castings on the stretchers were found to be over-sized. Using an over-sized cone-shaped hole corner casting with an improperly seated sh 783 units 2012-10-30
2003-03-28 Not classified Other The firm received complaints of the stretchers folding. A fold is when the stretcher lowers on its own to either the next position, or any of the other seven postions of the stretcher. 2188 total stretchers 2008-10-29
2003-03-28 Not classified Other The firm received complaints of the stretchers folding. A fold is when the stretcher lowers on its own to either the next position, or any of the other seven postions of the stretcher. 2188 total stretchers 2008-10-29

Source: U.S. FDA establishment registration and device listing records, public domain. Restructured for clarity and searchability. Not affiliated with or endorsed by the FDA. Records are records: nothing here is an offer of sale.

Where China Actually Supplies

Every device page names the company that lists it and the factories registered to make the same thing. These are the sections with the most of them.

5,100manufacturers registered in China
2,581device types they are registered for
340,248device records, each naming its maker
31provinces with a registered manufacturer