Mio®

21 catalogue numbers from MMT-923, listed by Unomedical A/S, Denmark, under Set, Administration, Intravascular. 49 manufacturers in China are registered for this product code.

Registry build 21.09.26
49manufacturers in China registered for this device type
21catalogue numbers in this listing
12510(k) clearances naming this product code
13recalls on this code

Who Else Makes It

Concentrated in Zhejiang (12), Jiangsu (11), Shanghai (10). 13 of them are registered as contract manufacturers, able to build to a buyer’s own specification.

Chinese manufacturers registered for FDA product code FPA
Manufacturer City Province Registered as Device types
Promisemed Hangzhou Meditech Co., Ltd. Hangzhou Zhejiang Contract manufacturer 21
Hantech Medical Device Co., Ltd. Cixi Zhejiang Contract manufacturer 18
Forefront Medical Technology (Jiangsu) Co., Ltd. Changzhou Jiangsu Contract manufacturer 14
BQ Plus Medical Co., Ltd. Songjiang Shanghai Contract manufacturer 13
Ningbo Tianyi Medical Appliance Co., Ltd. Ningbo Zhejiang Contract manufacturer 11
Anhui Tiankang Medical Technology Co., Ltd. Tianchang Anhui Contract manufacturer 9
Anhui Kangda Medical Products Co., Ltd. Tianchang Anhui Contract manufacturer 7
JDI Electronics Factory Dongguan Guangdong Contract manufacturer 7
Yangzhou Xingwei Medical Technology Co., Ltd. Yangzhou Jiangsu Contract manufacturer 5
Wenzhou K.L.F. Medical Plastics Co., Ltd. Wenzhou Zhejiang Contract manufacturer 4
Advance Technology Ltd Shenzhen Guangdong Contract manufacturer 3
Weihai Jierui Medical Products Co., Ltd. Weihai Shandong Contract manufacturer 3

Showing 12 of 49. All 49 manufacturers in China registered for Set, Administration, Intravascular

Record

Regulatory record for Mio®
Listed by Unomedical A/S, Denmark
FDA product code FPA
Device type Set, Administration, Intravascular
Device class Class 2
Regulation 21 CFR 880.5440
Establishment Specification developer, Complaint-file establishment, Manufacturer
Record published 2016-09-15
Record revised 2024-05-15 (version 4)

Specifications

Specifications
MRI safety Labeling does not contain MRI Safety Information
Supplied sterile Yes
Single use Yes
Prescription Prescription only
Label carries lot or batch number, expiry date
Storage Special storage condition: Store in a cool, dry place. Do not leave infusion sets in direct sunlight or inside a vehicle.
Packaging Outer box of 100, outer box of 36
Sizes Length 46 to 80 cm; depth 6 to 9 mm; angle 90 °
Distribution end date 2024-05-14

Catalogue Numbers

Catalogue numbers for Mio®
Catalogue number Size Per pack Status
MMT-923 Length 60 cm 10 In distribution
MMT-925600 Length 80 cm 10 In distribution
MMT-925 Length 80 cm 10 In distribution
MMT-921 Length 46 cm 10 In distribution
MMT-961 Length 46 cm 10 In distribution
MMT-943T Length 60 cm 2 In distribution
MMT-945600 Length 80 cm 10 In distribution
MMT-965 Length 80 cm 10 In distribution
MMT-941 Length 46 cm 10 In distribution
MMT-965600 Length 80 cm 10 In distribution
MMT-975T Length 80 cm 2 In distribution
MMT-945 Length 80 cm 10 In distribution
MMT-923600 Length 60 cm 10 In distribution
MMT-921600 Length 46 cm 10 In distribution
MMT-963 Length 60 cm 10 In distribution
MMT-943 Length 60 cm 10 In distribution
MMT-975 Length 80 cm 10 In distribution
MMT-941600 Length 46 cm 10 In distribution
MMT-943600 Length 60 cm 10 In distribution
MMT-975600 Length 80 cm 10 In distribution
MMT-945 Length 80 cm 10 Withdrawn

Same Product Code

Other products under the same FDA product code
Product Sold by Catalogue numbers
ICU Medical ICU Medical, Inc 529
Codan Codan US Corp. 510
Vygon Vygon Corp. 355
Port Access Needle Bard Access Systems, Inc. 341
Set, Administration, Intravascular Mps Medical, Inc. 291
Alaris, SmartSite BD Switzerland Sàrl 266
IV Administration Set B. Braun Medical Inc. 242
Medex ICU Medical, Inc 237
Extension Set B. Braun Medical Inc. 171
MaxGuard BD Switzerland Sàrl 150
Medline Medline Industries, Inc. 148
Centurion Centurion Medical Products Corporation 145

Showing 12 of 768. All products under Set, Administration, Intravascular

510(K) Clearances

FDA 510(k) clearances naming this product code
Clearance Decision date
K210544 2021-07-16
K192647 2019-12-13
K173879 2018-03-05
K162812 2017-11-01
K160648 2016-08-10
K132142 2013-10-08
K070430 2007-04-04
K061374 2006-07-31
K051264 2005-09-01
K041545 2004-06-30
K040633 2004-04-01
K032854 2003-10-09

Recalls

3 of these are Class I. Class I is the FDA’s most serious grade: a reasonable probability of serious injury or death. Class II means a temporary or reversible health consequence. Volume alone is not a quality signal: a manufacturer that ships more recalls more.

Recalls referencing this product code
Initiated FDA class Root cause Reason Quantity Closed
2024-07-23 Class II Process change control Specific VariSoftTM Infusion Sets were packaged using incorrect secondary packaging (boxes) branded “Trusteel Infusion Set”.
2024-03-05 Class II Device Design Specific lots of Neria Soft Infusion Sets, which have been shipped into the US Market, have been shipped with the incorrect Instruction for Use (IFU) within the final pack. The IFU included is the IFU registered for the Rest of World (ROW) 10,770 units
2023-10-11 Class I Process change control The Varisoft infusion set is used in conjunction with tandem insulin pumps. The defect reported was damage to the connector piece during manufacturing. This damage results in the connector becoming detached more easily from the insulin set 1679 units
2023-10-11 Class I Process change control The Varisoft infusion set is used in conjunction with tandem insulin pumps. The defect reported was damage to the connector piece during manufacturing. This damage results in the connector becoming detached more easily from the insulin set 8028 units
2023-10-11 Class I Process change control The Varisoft infusion set is used in conjunction with tandem insulin pumps. The defect reported was damage to the connector piece during manufacturing. This damage results in the connector becoming detached more easily from the insulin set 3362 units
2022-07-21 Class II Labeling Change Control The IFU incorrectly states the insulin fill value of two sizes of cannula which can result in an initial insulin infusion to be fewer units than intended. 1,643,320 units 2026-05-04
2015-05-21 Class II Nonconforming Material/Component Unomedical has found that in rare cases the steel needle can break during use, interrupting the delivery of medication including insulin. 22,976,870 units 2017-01-23
2014-11-07 Class II Device Design Tubing detachment 664,000 units 2016-11-16
2014-11-07 Class II Device Design Tubing detachment 9,782,880 units 2016-11-16
2014-11-07 Class II Device Design Tubing detachment 1,295,515 units 2016-11-16
2014-11-07 Class II Device Design Tubing detachment 4,748,000 units 2016-11-16
2014-11-07 Class II Device Design Tubing detachment 653,280 units 2016-11-16
2014-11-07 Class II Device Design Tubing detachment 22,114 units 2016-11-16

Source: U.S. FDA establishment registration and device listing records, public domain. Restructured for clarity and searchability. Not affiliated with or endorsed by the FDA. Records are records: nothing here is an offer of sale.

Where China Actually Supplies

Every device page names the company that lists it and the factories registered to make the same thing. These are the sections with the most of them.

5,100manufacturers registered in China
2,581device types they are registered for
340,248device records, each naming its maker
31provinces with a registered manufacturer