Thunderbeat II Shears With Ultrasonic Mode, 5mm, 25cm

THUNDERBEAT II Shears with Ultrasonic Mode cut, seal, coagulate, grasp and dissect tissue during open, laparoscopic and endoscopic surgery. They operate with the compatible TD-410…

Registry build 21.09.26

THUNDERBEAT II Shears with Ultrasonic Mode cut, seal, coagulate, grasp and dissect tissue during open, laparoscopic and endoscopic surgery. They operate with the compatible TD-410 transducer and USG-410 ultrasonic bipolar generator.

The instrument can apply combined ultrasonic vibration and bipolar high frequency current, bipolar energy alone, or ultrasonic energy alone. Energy is delivered at the grasping section and probe tip to treat vessels and tissue.

Mode Dependent Vessel Limits

Seal and Cut or Seal modes are designed for vessels up to 7 mm in diameter. Ultrasonic mode is limited to vessels up to 3 mm. These limits also accompany the indicated use on tissue bundles and lymphatic structures.

65manufacturers in China registered for this device type
2catalogue numbers in this listing
8510(k) clearances naming this product code

Who Else Makes It

Concentrated in Guangdong (24), Zhejiang (13), Shanghai (10). 23 of them are registered as contract manufacturers, able to build to a buyer’s own specification.

Chinese manufacturers registered for FDA product code GEI
Manufacturer City Province Registered as Device types
Amphenol Medical Technologies (Dongguan) Co., Ltd. Dongguan Guangdong Contract manufacturer 77
Shandong Weigao Orthopaedic Device Co., Ltd. Weihai Shandong Contract manufacturer 42
Hangzhou Kangji Medical Instrument Co., Ltd. Hangzhou Zhejiang Contract manufacturer 27
Modern Medical Equipment Manufacturing Ltd. Heng Li, Dongguan Guangdong Contract manufacturer 26
Amphenol Alden Products Company Shenzhen Guangdong Contract manufacturer 24
Hangzhou Endo Medical Instrument Co., Ltd. Hangzhou Zhejiang Contract manufacturer 19
Hong Qiangxing (Shen Zhen) Electronics Limited Shenzhen Guangdong Contract manufacturer 19
Shenzhen MED-Link Electronics Tech Co., Ltd. Shenzhen Guangdong Contract manufacturer 18
Sanbor Medical Xiamen, Inc. Xiamen Fujian Contract manufacturer 16
ATL Technology DG,Ltd. Dongguan Guangdong Contract manufacturer 14
Jiangyin Sinbon Electronics Co Ltd Jiangyin Jiangsu Contract manufacturer 13
Guangzhou Huada Biotechnology Co., Ltd. Guangzhou Guangdong Contract manufacturer 9

Showing 12 of 65. All 65 manufacturers in China registered for Electrosurgical, Cutting & Coagulation & Accessories

Record

Regulatory record for Thunderbeat II Shears with Ultrasonic Mode, 5mm, 25cm
Listed by Olympus Medical Systems Corp., Japan
FDA product code GEI
Device type Electrosurgical, Cutting & Coagulation & Accessories
Device class Class 2
Regulation 21 CFR 878.4400
Establishment Specification developer, Manufacturer, Exporter
510(k) K252150
Record published 2025-12-04

Specifications

Specifications
MRI safety Labeling does not contain MRI Safety Information
Supplied sterile Yes
Single use Yes
Prescription Prescription only
Latex Labelled latex-free
Label carries lot or batch number, expiry date

Catalogue Numbers

Catalogue numbers for Thunderbeat II Shears with Ultrasonic Mode, 5mm, 25cm
Catalogue number Size Status
TB2-0525FC In distribution
TB2-0520FC In distribution

Same Product Code

Other products under the same FDA product code
Product Sold by Catalogue numbers
Surgical Direct Surgical Direct, Inc. 5,729
Speedlock National Advanced Endoscopy Devices, Inc. 5,212
Stingray Surgical Products Stingray Surgical Products L.L.C. 4,647
Kirwan Kirwan Surgical Products, LLC. 1,901
Millennium Avalign Technologies, Inc. 1,779
DANmed Dannoritzer Medizintechnik GmbH & Co. KG 1,590
Elmed Elmed, Inc. 1,519
Symmetry Olsen Aspen Surgical Products, Inc. 1,219
Guenter Bissinger Medizintechnik GmbH Günter Bissinger Medizintechnik GmbH 1,117
Ambler Surgical Ambler Surgical, LLC 756
V. Mueller Steris Corporation 661
Aesculap Aesculap AG 544

Showing 12 of 2,922. All products under Electrosurgical, Cutting & Coagulation & Accessories

510(K) Clearances

FDA 510(k) clearances naming this product code
Clearance Decision date
K254056 2026-07-01
K252150 2025-10-07
K192103 2020-05-11
K180575 2018-07-12
K172610 2018-04-17
K151743 2016-02-26
K132703 2014-05-19
K111202 2012-01-20

Recalls Naming This Product

4 recalls name this product by its own identifiers, the 510(k) it is cleared under.

Recalls naming the identifiers of Thunderbeat II Shears with Ultrasonic Mode, 5mm, 25cm
Recalled by Identified by Initiated FDA class Root cause Reason Quantity
Olympus Corporation of the Americas 510(k) number 2026-03-23 Class II Device Design Potential for detachment of a distal tip component of the device during use. 830 units
Olympus Corporation of the Americas 510(k) number 2026-03-23 Class II Device Design Potential for detachment of a distal tip component of the device during use. 365 units
Olympus Corporation of the Americas 510(k) number 2026-03-23 Class II Device Design Potential for detachment of a distal tip component of the device during use. 3,360 units
Olympus Corporation of the Americas 510(k) number 2026-03-23 Class II Device Design Potential for detachment of a distal tip component of the device during use. 490 units

Source: U.S. FDA establishment registration and device listing records, public domain. Restructured for clarity and searchability. Not affiliated with or endorsed by the FDA. Records are records: nothing here is an offer of sale.

Where China Actually Supplies

Every device page names the company that lists it and the factories registered to make the same thing. These are the sections with the most of them.

5,100manufacturers registered in China
2,581device types they are registered for
340,248device records, each naming its maker
31provinces with a registered manufacturer