Cardinal Health
Cardinal Health Silicone Foam Lite 2.4 x 3.4in. Dressing Partial to full thickness wounds: -Pressure ulcers -Traumatic wounds -Venous, arterial and diabetic ulcers -Lacerations and…
Cardinal Health Silicone Foam Lite 2.4 x 3.4in. Dressing Partial to full thickness wounds: -Pressure ulcers -Traumatic wounds -Venous, arterial and diabetic ulcers -Lacerations and abrasions -Finger injuries -Blisters -Partial thickness burns -Epidermolysis bullosa -Painful wounds -Radiation skin reactions Absorbent thin foam pad Gentle silicone adhesive Protective film backing Directions for use: 1. Clean wound with appropriate wound cleanser such as Cardinal Health Wound Cleanser. Dry surrounding skin thoroughly. 2. Remove dressing from packaging and if necessary cut dressing to size. For dressings smaller than 5×5 inches, there should be a 3/4-inch overlap onto the dry skin surrounding the wound. For dressings larger than 5×5 inches, there should be a 2-inch overlap. 3. Affix dressing over wound considering the overlap recommendations to protect the surrounding skin. 4. If necessary, cover this primary dressing with a moisture retentive secondary dressing to protect and promote a moist wound healing environment. 5. All dressings should be monitored frequently. Remove dressing when clinically indicated, such as leakage or increased pain, or after a maximum of 7 days. Not made with natural rubber latex Indications: May be used for the management of dry to light exuding, partial to full thickness wounds, including: -Pressure ulcers -Traumatic wounds -Venous, arterial and diabetic ulcers -Lacerations and abrasions -Finger injuries -Blisters -Partial thickness burns -Epidermolysis bullosa -Painful wounds -Radiation skin reactions Can also be used to provide protection of compromised and/or fragile skin.
Who Else Makes It
Concentrated in Zhejiang (54), Jiangsu (41), Guangdong (23). 33 of them are registered as contract manufacturers, able to build to a buyer’s own specification.
| Manufacturer | City | Province | Registered as | Device types |
|---|---|---|---|---|
| Shanghai Joy Crown Industry Co., Ltd. | Pu Dong New Area | Shanghai | Contract manufacturer | 64 |
| Hubei V-Medical Products Co., Ltd. | Xiantao | Hubei | Contract manufacturer | 46 |
| Allmed Medical Products Co., Ltd. | Zhijiang | Hubei | Contract manufacturer | 43 |
| Dongguan Shin YI Healthcare Products Factory | Dong Guan | Guangdong | Contract manufacturer | 30 |
| Jinhua Jingdi Medical Supplies Co., Ltd. | Jinhua | Zhejiang | Contract manufacturer | 29 |
| Yiwu Haoding Medical Co., Ltd. | Yiwu | Zhejiang | Contract manufacturer | 23 |
| Changzhou Recoo Healthcare Co., Ltd. | Changzhou | Jiangsu | Contract manufacturer | 19 |
| Derma Sciences Nantong Incorporation | Development | Jiangsu | Contract manufacturer | 19 |
| Henso Medical (Hangzhou) Co., Ltd. | Hangzhou | Zhejiang | Contract manufacturer | 19 |
| Huizhou Foryou Medical Devices Co., Ltd. | Huizhou | Guangdong | Contract manufacturer | 18 |
| Jianerkang Medical Co., Ltd. | Changzhou | Jiangsu | Contract manufacturer | 18 |
| Anhui Kangfu Industrial Foreign Trade Co., Ltd. | Tianchang | Anhui | Contract manufacturer | 18 |
Showing 12 of 183. All 183 manufacturers in China registered for Dressing, Wound, Occlusive
Record
| Listed by | Cardinal Health 200, LLC, United States |
|---|---|
| FDA product code | NAD |
| Device type | Dressing, Wound, Occlusive |
| Device class | Class 1 |
| Regulation | 21 CFR 878.4020 |
| Establishment | Contract manufacturer, Repacker / relabeller, Complaint-file establishment, Manufacturer |
| Premarket notification | Exempt |
| Record published | 2019-06-24 |
| Record revised | 2026-04-29 (version 6) |
Specifications
| MRI safety | Labeling does not contain MRI Safety Information |
|---|---|
| Supplied sterile | Yes |
| Single use | Yes |
| Prescription | Prescription only |
| Over the counter | Yes |
| Supplied as a kit | Yes |
| Latex | Labelled latex-free |
| Label carries | lot or batch number, expiry date, manufacturing date |
| Storage | Storage environment temperature 0 to 35 °C |
| Packaging | Case of 5, box of 10, box of 5, case of 4, case of 20, box of 50 |
| Sizes | Length 2.45 to 12.5 in; width 2 to 8 in |
| Distribution end date | 2028-12-31 |
Catalogue Numbers
| Catalogue number | Size | Per pack | Status |
|---|---|---|---|
| TD-29 | Length 12 in | In distribution | |
| TD-21 | Width 4 in | In distribution | |
| TD-20 | Length 2.75 in | In distribution | |
| SER31TBUCB | In distribution | ||
| BFM48 | In distribution | ||
| SBA48TDSEA | In distribution | ||
| HCT66 | In distribution | ||
| BFM33LTE | In distribution | ||
| HCOVAL | In distribution | ||
| BFM44 | In distribution | ||
| HCT33 | In distribution | ||
| TD-35 | Length 4.25 in | In distribution | |
| FM66LTE | In distribution | ||
| HCTOVAL | In distribution | ||
| BFM412 | In distribution | ||
| FMTRACH | In distribution | ||
| FM88 | In distribution | ||
| BFM22LTE | In distribution | ||
| TD-33 | Length 3.25 in | In distribution | |
| BFMLGSCRL | In distribution | ||
| BFM44LTE | In distribution | ||
| BFMSMSCRL | In distribution | ||
| SCL47 | In distribution | ||
| BFM25LTE | In distribution | ||
| SER31TBUCA | In distribution | ||
| C-DDS0410S | Width 5.5 in | In distribution | |
| TD-16 | Width 4 in | In distribution | |
| BFM410 | In distribution | ||
| SBA31TBUCA | In distribution | ||
| HC66 | In distribution | ||
| TD-14 | Width 2.37 in | In distribution | |
| HCT44 | In distribution | ||
| SCL812 | In distribution | ||
| HC88 | In distribution | ||
| FM48 | In distribution | ||
| TD-50 | Length 6.13 in | In distribution | |
| FM44LTE | In distribution | ||
| HC44 | In distribution | ||
| FM23LTE | In distribution | ||
| TD-55 | Width 3.5 in | In distribution | |
| HCTRI | In distribution | ||
| SRIGS1220B | In distribution | ||
| SID23AANCB | In distribution | ||
| BFM33 | In distribution | ||
| BFM66LTE | In distribution | ||
| 14-1238A | In distribution | ||
| SNU11DRSBA | In distribution | ||
| FM66 | In distribution | ||
| SID23TFNCC | In distribution | ||
| HCTSPOTS | In distribution | ||
| TD-10 | Width 2 in | In distribution | |
| BFM68 | In distribution | ||
| BFM66 | In distribution | ||
| FMHEEL | In distribution | ||
| SCL34 | In distribution | ||
| SCL23 | In distribution | ||
| FM820LTE | In distribution | ||
| TD-30 | Width 4 in | In distribution | |
| FM44 | In distribution | ||
| S1040 | 5 | Withdrawn |
Same Product Code
| Product | Sold by | Catalogue numbers |
|---|---|---|
| Medline | Medline Industries, Inc. | 93 |
| MemGard | Dalian Orientech Co., Ltd. | 89 |
| Leukomed® | BSN Medical, Inc. | 74 |
| ProCure | Twin Med, LLC | 62 |
| Rhino Rescue | Wuxi Emsrun Technology Co., Ltd. | 60 |
| Vitale | CellEra, LLC | 59 |
| McKesson | Mckesson Medical-Surgical Inc. | 50 |
| ActivHeal | Advanced Medical Solutions Ltd | 49 |
| 3M™ Tegaderm™ | 3M Company | 44 |
| DeRoyal | Deroyal Industries, Inc. | 39 |
| Healqu | Healqu, LLC | 38 |
| Leukoplast® | BSN Medical, Inc. | 36 |
Showing 12 of 526. All products under Dressing, Wound, Occlusive
Source: U.S. FDA establishment registration and device listing records, public domain. Restructured for clarity and searchability. Not affiliated with or endorsed by the FDA. Records are records: nothing here is an offer of sale.