Biomet® Knee System

34 catalogue numbers from 141235, listed by Biomet Orthopedics, United States, under Prosthesis, Knee, Femorotibial, Semi-Constrained, Cemented, Metal/Polymer. 10 manufacturers in China are registered for this product code.

Registry build 21.09.26
10manufacturers in China registered for this device type
34catalogue numbers in this listing
1510(k) clearance

Who Else Makes It

Concentrated in Jiangsu (6), Shanghai (2), Zhejiang (2). 4 of them are registered as contract manufacturers, able to build to a buyer’s own specification.

Chinese manufacturers registered for FDA product code HRY
Manufacturer City Province Registered as Device types
Paragon Medical Device (Changzhou) Co., Ltd. Changzhou Jiangsu Contract manufacturer 53
Canwell Medical Co., Ltd. Jinhua Zhejiang Contract manufacturer 42
Suzhou Elite Precision Machinery Co., Ltd. Kunshan Jiangsu Contract manufacturer 35
Suzhou Ahno Medical Devices Co., Ltd. Suzhou Jiangsu Contract manufacturer 17
Zimmer (Shanghai) Medical International Trading Co., Ltd. Shanghai Shanghai Exporter 106
Zhejiang Biomet Medical Products Co., Ltd. Jinhua Zhejiang Contract manufacturer 74
Shanghai JPY ION-Tech Co., Ltd. Shanghai Shanghai Contract manufacturer 70
Changzhou Biomet Medical Devices Co., Ltd. Changzhou Jiangsu Contract manufacturer 54
Johnson & Johnson Medical (Depuy – Suzhou) Ltd. Suzhou Jiangsu Manufacturer 34
Suzhou Microport Orthorecon Co., Ltd. Suzhou Jiangsu Contract manufacturer 31

Record

Regulatory record for Biomet® Knee System
Listed by Biomet Orthopedics, United States
FDA product code HRY
Device type Prosthesis, Knee, Femorotibial, Semi-Constrained, Cemented, Metal/Polymer
Device class Class 2
Regulation 21 CFR 888.3530
510(k) K142933
Record published 2018-07-23
Record revised 2025-05-30 (version 7)

Specifications

Specifications
MRI safety MR Conditional
Supplied sterile Yes
Single use Yes
Prescription Prescription only
Label carries lot or batch number, expiry date, manufacturing date

Catalogue Numbers

Catalogue numbers for Biomet® Knee System
Catalogue number Size Status
141235 79 mm In distribution
CP102887 31 mm In distribution
11-150856 Large 37 mm In distribution
185185 23 mm In distribution
141224 75 mm In distribution
141227 87 mm In distribution
141223 71 mm In distribution
141510 59 mm In distribution
11-150822 MEDIUM SIZE 34 MM In distribution
141489 NEUTRAL SIZE In distribution
141221 63 mm In distribution
141214 75 mm In distribution
11-150838 28 MM 8 MM In distribution
141228 91 mm In distribution
141235 79 mm In distribution
11-150828 34 mm 9 mm In distribution
141236 83 mm In distribution
141234 75 mm In distribution
11-150825 28 mm 8 mm In distribution
141233 71 mm In distribution
141261 63 mm In distribution
141515 79 mm In distribution
CP102889 37 MM In distribution
CP102886 28 MM In distribution
141226 83 mm In distribution
141234 75 mm In distribution
141484 75 MM In distribution
CP102883 31 MM In distribution
148010 20 MM 160 MM In distribution
141218 91 mm In distribution
145062 12 MM 160 MM In distribution
141225 79 mm In distribution
11-150842 34 MM 9 MM In distribution
11-150825 28 MM 8 MM In distribution

Same Product Code

Other products under the same FDA product code
Product Sold by Catalogue numbers
Legion Smith & Nephew, Inc. 1,682
Genesis II Smith & Nephew, Inc. 615
Journey II Smith & Nephew, Inc. 581
Evolution Microport Orthopedics Inc. 311
Profix Smith & Nephew, Inc. 293
Journey Smith & Nephew, Inc. 215
LinkSymphoKnee Waldemar Link GmbH & Co. KG 201
Prosthesis, Knee, Femorotibial, Semi-Constrained, Cemented, Metal/Polymer Smith & Nephew, Inc. 160
JII Smith & Nephew, Inc. 141
Physica KR Limacorporate 128
Physica LMC Limacorporate 120
Implant Partners Microport Orthopedics Inc. 119

Showing 12 of 160. All products under Prosthesis, Knee, Femorotibial, Semi-Constrained, Cemented, Metal/Polymer

510(K) Clearances

FDA 510(k) clearances naming this product code
Clearance Decision date
K020264 2002-02-08

Recalls Naming This Product

21 recalls name this product by its own identifiers, the 510(k) it is cleared under.

Recalls naming the identifiers of Biomet® Knee System
Recalled by Identified by Initiated FDA class Root cause Reason Quantity Closed
Biomet, Inc. 510(k) number 2022-12-29 Class II Labeling Change Control Components Incorrectly labeled as either smaller or larger and incorrect side (right/left). 157 units
Biomet, Inc. 510(k) number 2022-12-29 Class II Labeling Change Control Components Incorrectly labeled as either smaller or larger and incorrect side (right/left). 91 units
Biomet, Inc. 510(k) number 2020-04-17 Class II Process control Potential presence of elevated endotoxin levels that exceed the specification limit 54 units 2021-06-25
Biomet, Inc. 510(k) number 2018-12-21 Class II Under Investigation by firm Vanguard Knee System Series-A Standard Patella a potential commingle that could result in the size of the implant not matching the size on the label. 90 units 2020-05-13
Biomet, Inc. 510(k) number 2018-10-22 Class II Labeling mix-ups Label on the outer carton or the patient labels does not match label on the inner sterile packaging 8 units 2019-12-11
Biomet, Inc. 510(k) number 2018-10-22 Class II Labeling mix-ups Label on the outer carton or the patient labels does not match label on the inner sterile packaging 8 units 2019-12-11
Biomet, Inc. 510(k) number 2018-05-24 Class II Under Investigation by firm Two lots of tibial bearings were commingled. There is a possibility that a 14mm tibial bearing is packaged in a box labeled as 12 mm tibial bearing and vice versa. This may lead to extension of surgery to find another implant. 48 2020-04-07
Biomet, Inc. 510(k) number 2018-05-18 Class II Under Investigation by firm One lot of 75mm tibial tray is potentially etched and labeled as a 79 mm tibial tray. This may lead to delay in surgery, or immediate revision surgery to remove an incorrectly sized tibial component after it has been cemented. 16 2020-03-31
Biomet, Inc. 510(k) number 2018-05-11 Class II Under Investigation by firm The label master file was errantly set up as a 63/37mm instead of a 63/67mm. There is no 63/37 size offered, and the product is laser marked with the correct size. 169 2019-11-21
Biomet, Inc. 510(k) number 2017-10-03 Class II Error in labeling The affected products are labeled as a 62.5mm LEFT Femur; however, the contents are a Vanguard 70mm RIGHT Femur. 8 2018-08-23
Biomet, Inc. 510(k) number 2017-08-25 Class II Process change control The affected AGC 2000 LP Patella products were over-molded leaving the outside diameter nonconforming to the print dimension. 28 devices 2018-08-09
Biomet, Inc. 510(k) number 2017-08-25 Class II Process change control The affected AGC 2000 LP Patella products were over-molded leaving the outside diameter nonconforming to the print dimension. 11 devices 2018-08-09
Biomet, Inc. 510(k) number 2016-12-15 Class II Material/Component Contamination Zimmer Biomet is conducting a medical device recall for ARCOS & TPRLC broaches and rasps due to potential alumina inclusions in the raw material batch used to produce the affected products. Inclusions contained within the finished product c 26 2018-06-29
Biomet, Inc. 510(k) number 2015-04-16 Class III Labeling mix-ups Biomet hip joint, knee joint and shoulder joint replacement components device labeling contains incorrect GTIN (Global Trade Identification Number) codes. 1315 2016-05-16
Biomet, Inc. 510(k) number 2012-11-15 Class II Employee error Biomet investigation identified that the square end of the offset tibial tray adaptor locking insert is oversized and may not engage insert tool screwdriver. This could cause a possible delay in surgery greater than 30 minutes, potentiall 200 2013-11-08
Biomet, Inc. 510(k) number 2011-03-03 Not classified Packaging process control The firm is recalling the product due to the product’s packaging being labeled “I-Beam 75mm. Tibial Plate”, but the package actually contains the “Interlok 67mm. CR Tibial Plate”. 8 2011-07-27
Biomet, Inc. 510(k) number 2007-12-12 Not classified Packaging process control Mislabeled as to size: Package labeled as containing a 67 mm tray actually contains a 75 mm tray and vice versa. 8 2008-06-11
Biomet, Inc. 510(k) number 2007-12-12 Not classified Packaging process control Mislabeled as to size: Package labeled as containing a 67 mm tray actually contains a 75 mm tray and vice versa. 8 2008-06-11
Biomet, Inc. 510(k) number 2007-09-18 Not classified Labeling mix-ups Mislabeled as to size: the package actaully contained a 71 mm tray. 7 2008-06-04
Biomet, Inc. 510(k) number 2007-07-24 Not classified Labeling mix-ups Incorrect Product — Mislabeled as to size; a 18 mm x 65 mm tibula implant is enclosed in a package labeled as 12 mm x 80 mm. 4 2008-07-24
Biomet, Inc. 510(k) number 2007-07-24 Not classified Labeling mix-ups Incorrect Product — Mislabeled as to size; a 18 mm x 65 mm tibula implant is enclosed in a package labeled as 12 mm x 80 mm. 1 2008-07-24

PMA Approvals

A premarket approval is the full Class III route, granted on clinical evidence rather than on equivalence to an existing device. It is the highest regulatory bar a device of this type can clear.

FDA premarket approvals naming this product code
PMA number Decision Trade name Approved to
P840049 1988-09-30 P.C.A.(TM) TOTAL KNEE SYSTEM Howmedica Corp.

Source: U.S. FDA establishment registration and device listing records, public domain. Restructured for clarity and searchability. Not affiliated with or endorsed by the FDA. Records are records: nothing here is an offer of sale.

Where China Actually Supplies

Every device page names the company that lists it and the factories registered to make the same thing. These are the sections with the most of them.

5,100manufacturers registered in China
2,581device types they are registered for
340,248device records, each naming its maker
31provinces with a registered manufacturer