ZMR®
127 catalogue numbers from 9975-57-02, listed by Zimmer, Inc., United States, under Prosthesis, Hip, Semi-Constrained, Metal/Ceramic/Polymer, Cemented Or Non-Porous, Uncemented. 15 manufacturers in China are registered for this product code.
15manufacturers in China registered for this device type
127catalogue numbers in this listing
34510(k) clearances naming this product code
40recalls on this code
Who Else Makes It
Concentrated in Jiangsu (8), Shanghai (3), Zhejiang (2). 10 of them are registered as contract manufacturers, able to build to a buyer’s own specification.
| Manufacturer | City | Province | Registered as | Device types |
|---|---|---|---|---|
| MicroPort Orthopedics Global Supply Center Limited | Shanghai | Shanghai | Contract manufacturer | 82 |
| Zhejiang Biomet Medical Products Co., Ltd. | Jinhua | Zhejiang | Contract manufacturer | 74 |
| Canwell Medical Co., Ltd. | Jinhua | Zhejiang | Contract manufacturer | 42 |
| Suzhou Elite Precision Machinery Co., Ltd. | Kunshan | Jiangsu | Contract manufacturer | 35 |
| B-ONE Medical (Suzhou) Co., Ltd. | Suzhou | Jiangsu | Contract manufacturer | 23 |
| Stryker (Suzhou) Medical Technology Co., Ltd. | Suzhou | Jiangsu | Contract manufacturer | 19 |
| APS Materials Suzhou | Suzhou | Jiangsu | Contract manufacturer | 18 |
| Xian Airfoil Technology Co., Ltd. | Xian | Shaanxi | Contract manufacturer | 8 |
| Lincotek (Wuxi) Co., Ltd. | Wuxi | Jiangsu | Contract manufacturer | 7 |
| b-ONE Medical (Beijing) Co., Ltd. | Beijing | Beijing | Contract manufacturer | 7 |
| Zimmer (Shanghai) Medical International Trading Co., Ltd. | Shanghai | Shanghai | Exporter | 106 |
| Shanghai JPY ION-Tech Co., Ltd. | Shanghai | Shanghai | Contract manufacturer | 70 |
Showing 12 of 15. All 15 manufacturers in China registered for Prosthesis, Hip, Semi-Constrained, Metal/Ceramic/Polymer, Cemented Or Non-Porous, Uncemented
Record
| Listed by | Zimmer, Inc., United States |
|---|---|
| FDA product code | LZO |
| Device type | Prosthesis, Hip, Semi-Constrained, Metal/Ceramic/Polymer, Cemented Or Non-Porous, Uncemented |
| Device class | Class 2 |
| Regulation | 21 CFR 888.3353 |
| Establishment | Contract manufacturer, Specification developer, Repacker / relabeller, Manufacturer, Exporter |
| 510(k) | K113296 |
| Record published | 2016-07-18 |
| Record revised | 2020-06-19 (version 6) |
Specifications
| MRI safety | Labeling does not contain MRI Safety Information |
|---|---|
| Sterilisation | Moist Heat or Steam Sterilization |
| Supplied sterile | Yes |
| Single use | Yes |
| Prescription | Prescription only |
| Label carries | lot or batch number, expiry date |
| Sizes | Length 78 to 93 mm |
Catalogue Numbers
| Catalogue number | Size | Status |
|---|---|---|
| 9975-57-02 | In distribution | |
| 9978-19-35 | 12/14 C-Ring Taper, 40 mm Neck Offset, Size C 35 mm Build-Up | In distribution |
| 9980-210-33 | 21.0 mm Diameter, 220 mm Stem Length | In distribution |
| 9975-36 | In distribution | |
| 9961-225-33 | Size 22.5, 220 mm Stem Length | In distribution |
| 9983-240-33 | 24.0 mm Diameter, 220 mm Stem Length | In distribution |
| 00-9924-045-93 | 45 mm Neck Offset, 93 mm Build-Up | In distribution |
| 9962-16-13 | Size 16, 135 mm Stem Length | In distribution |
| 9980-255-22 | 25.5 mm Diameter, 170 mm Stem Length | In distribution |
| 9952-22-18 | Size 22, 185 mm Stem Length | In distribution |
| 9955-71-03 | In distribution | |
| 9981-180-22 | 18.0 mm Diameter, 170 mm Stem Length | In distribution |
| 00-9975-007-17 | A Body | In distribution |
| 9971-23-55 | 12/14 C-Ring Taper, 46 mm Neck Offset, Size F 55 mm Build-Up | In distribution |
| 9983-165-34 | 16.5 mm Diameter, 260 mm Stem Length | In distribution |
| 9921-225-32 | 22.5 mm Diameter, 170 mm Stem Length | In distribution |
| 9970-17-46 | 12/14 C-Ring Taper, 46 mm Neck Offset, Size A 35 mm Build-Up | In distribution |
| 9997-19-55 | 12/14 Neck Taper, 40 mm Neck Offset, Size C, 55 mm Build-Up | In distribution |
| 9975-37-05 | In distribution | |
| 9996-19-35 | 12/14 Neck Taper, 40 mm Neck Offset, Size C, 35 mm Build-Up | In distribution |
| 9933-16-35 | 12/14 C-Ring Taper, 40 mm Neck Offset, Size AA Minus (-) 35 mm Build-Up | In distribution |
| 9990-21-46 | 12/14 Neck Taper, 46 mm Neck Offset, Size E, 35 mm Build-Up | In distribution |
| 9921-225-22 | 22.5 mm Diameter, 170 mm Stem Length | In distribution |
| 9962-17-23 | Size 17, 235 mm Stem Length | In distribution |
| 9963-165-34 | Size 16.5, 260 mm Stem Length | In distribution |
| 9990-18-40 | 12/14 Neck Taper, 40 mm Neck Offset, Size B, 35 mm Build-Up | In distribution |
| 9980-180-22 | 18.0 mm Diameter, 170 mm Stem Length | In distribution |
| 9948-16-35 | 12/14 Neck Taper, 40 mm Neck Offset, Size AA Minus (-), 35 mm Build-Up | In distribution |
| 9993-23-55 | 12/14 Neck Taper, 46 mm Neck Offset, Size F, 55 mm Build-Up | In distribution |
| 9973-19-45 | 12/14 C-Ring Taper, 46 mm Neck Offset, Size C 45 mm Build-Up | In distribution |
| 9977-19-55 | 12/14 C-Ring Taper, 40 mm Neck Offset, Size C 55 mm Build-Up | In distribution |
| 9980-195-33 | 19.5 mm Diameter, 220 mm Stem Length | In distribution |
| 9974-20-45 | 12/14 C-Ring Taper, 46 mm Neck Offset, Size D 45 mm Build-Up | In distribution |
| 9953-93-45 | 12/14 C-Ring Taper, 45 mm Neck Offset | In distribution |
| 9965-73-01 | In distribution | |
| 9963-195-34 | Size 19.5, 260 mm Stem Length | In distribution |
| 9952-23-23 | Size 23, 235 mm Stem Length | In distribution |
| 9996-18-35 | 12/14 Neck Taper, 40 mm Neck Offset, Size B, 35 mm Build-Up | In distribution |
| 9982-22-23 | 22 mm Diameter, 235 mm Stem Length | In distribution |
| 9923-78-45 | Length 78 mm | In distribution |
| 9990-23-46 | 12/14 Neck Taper, 46 mm Neck Offset, Size F, 35 mm Build-Up | In distribution |
| 9961-195-33 | Size 19.5, 220 mm Stem Length | In distribution |
| 9980-120-21 | 12.0 mm Diameter, 115 mm Stem Length | In distribution |
| 9983-165-33 | 16.5 mm Diameter, 220 mm Stem Length | In distribution |
| 9993-17-35 | 12/14 Neck Taper, 46 mm Neck Offset, Size A, 35 mm Build-Up | In distribution |
| 9962-16-23 | Size 16, 235 mm Stem Length | In distribution |
| 9998-19-45 | 12/14 Neck Taper, 40 mm Neck Offset, Size C, 45 mm Build-Up | In distribution |
| 9983-225-32 | 22.5 mm Diameter, 170 mm Stem Length | In distribution |
| 9975-02-21 | Size 21.0 | In distribution |
| 9993-21-35 | 12/14 Neck Taper, 46 mm Neck Offset, Size E, 35 mm Build-Up | In distribution |
| 9994-19-55 | 12/14 Neck Taper, 46 mm Neck Offset, Size C, 55 mm Build-Up | In distribution |
| 9975-01-19 | In distribution | |
| 9961-180-22 | Size 18.0, 170 mm Stem Length | In distribution |
| 9971-19-55 | 12/14 C-Ring Taper, 46 mm Neck Offset, Size C 55 mm Build-Up | In distribution |
| 9996-19-45 | 12/14 Neck Taper, 40 mm Neck Offset, Size C, 45 mm Build-Up | In distribution |
| 9982-20-23 | 20 mm Diameter, 235 mm Stem Length | In distribution |
| 00-9996-040-35 | 40 mm Neck Offset, 35 mm Build-Up | In distribution |
| 9975-02-19 | Size 19.5 | In distribution |
| 9980-225-22 | 22.5 mm Diameter, 170 mm Stem Length | In distribution |
| 9975-03-19 | In distribution | |
| 9981-150-33 | 15.0 mm Diameter, 220 mm Stem Length | In distribution |
| 9980-180-32 | 18.0 mm Diameter, 170 mm Stem Length | In distribution |
| 9975-01-18 | In distribution | |
| 9961-255-22 | Size 25.5, 170 mm Stem Length | In distribution |
| 9973-21-55 | 12/14 C-Ring Taper, 46 mm Neck Offset, Size E 55 mm Build-Up | In distribution |
| 9996-21-35 | 12/14 Neck Taper, 40 mm Neck Offset, Size E, 35 mm Build-Up | In distribution |
| 9983-165-32 | 16.5 mm Diameter, 170 mm Stem Length | In distribution |
| 9921-180-22 | 18.0 mm Diameter, 170 mm Stem Length | In distribution |
| 9922-17-18 | 17 mm Diameter, 185 mm Stem Length | In distribution |
| 9973-17-55 | 12/14 C-Ring Taper, 46 mm Neck Offset, Size A 55 mm Build-Up | In distribution |
| 9921-165-33 | 16.5 mm Diameter, 220 mm Stem Length | In distribution |
| 9961-150-21 | Size 15.0, 115 mm Stem Length | In distribution |
| 9922-18-18 | 18 mm Diameter, 185 mm Stem Length | In distribution |
| 9962-20-18 | Size 20, 185 mm Stem Length | In distribution |
| 9922-18-13 | 18 mm Diameter, 135 mm Stem Length | In distribution |
| 9991-17-55 | 12/14 Neck Taper, 46 mm Neck Offset, Size A, 55 mm Build-Up | In distribution |
| 9982-18-13 | 18 mm Diameter, 135 mm Stem Length | In distribution |
| 9983-135-32 | 13.5 mm Diameter, 170 mm Stem Length | In distribution |
| 9993-19-35 | 12/14 Neck Taper, 46 mm Neck Offset, Size C, 35 mm Build-Up | In distribution |
| 9981-165-33 | 16.5 mm Diameter, 220 mm Stem Length | In distribution |
| 9970-20-40 | 12/14 C-Ring Taper, 40 mm Neck Offset, Size D 35 mm Build-Up | In distribution |
| 9961-135-33 | Size 13.5, 220 mm Stem Length | In distribution |
| 9980-180-33 | 18.0 mm Diameter, 220 mm Stem Length | In distribution |
| 9982-15-18 | 15 mm Diameter, 185 mm Stem Length | In distribution |
| 9965-140 | In distribution | |
| 9973-23-45 | 12/14 C-Ring Taper, 46 mm Neck Offset, Size F 45 mm Build-Up | In distribution |
| 9955-18-10 | Size 18 | In distribution |
| 9953-78-40 | Length 78 mm | In distribution |
| 9963-180-34 | Size 18.0, 260 mm Stem Length | In distribution |
| 9974-21-45 | 12/14 C-Ring Taper, 46 mm Neck Offset, Size E 45 mm Build-Up | In distribution |
| 9981-165-22 | 16.5 mm Diameter, 170 mm Stem Length | In distribution |
| 9981-255-32 | 25.5 mm Diameter, 170 mm Stem Length | In distribution |
| 9975-39 | In distribution | |
| 9982-17-13 | 17 mm Diameter, 135 mm Stem Length | In distribution |
| 9991-20-45 | 12/14 Neck Taper, 46 mm Neck Offset, Size D, 45 mm Build-Up | In distribution |
| 9991-20-55 | 12/14 Neck Taper, 46 mm Neck Offset, Size D, 55 mm Build-Up | In distribution |
| 9994-20-45 | 12/14 Neck Taper, 46 mm Neck Offset, Size D, 45 mm Build-Up | In distribution |
| 9965-15-13 | Size 15 | In distribution |
| 9975-35-02 | In distribution | |
| 9955-40-02 | In distribution | |
| 9955-19-10 | Size 19 | In distribution |
| 9962-14-13 | Size 14, 135 mm Stem Length | In distribution |
| 00-9975-007-19 | C Body | In distribution |
| 9961-150-32 | Size 15.0, 170 mm Stem Length | In distribution |
| 9952-17-23 | Size 17, 235 mm Stem Length | In distribution |
| 9973-21-45 | 12/14 C-Ring Taper, 46 mm Neck Offset, Size E 45 mm Build-Up | In distribution |
| 9980-225-33 | 22.5 mm Diameter, 220 mm Stem Length | In distribution |
| 9983-195-34 | 19.5 mm Diameter, 260 mm Stem Length | In distribution |
| 9980-240-32 | 24.0 mm Diameter, 170 mm Stem Length | In distribution |
| 9922-20-18 | 20 mm Diameter, 185 mm Stem Length | In distribution |
| 9976-17-45 | 12/14 C-Ring Taper, 40 mm Neck Offset, Size A 45 mm Build-Up | In distribution |
| 9975-03-17 | In distribution | |
| 9952-24-23 | Size 24, 235 mm Stem Length | In distribution |
| 9952-19-23 | Size 19, 235 mm Stem Length | In distribution |
| 00-9924-040-93 | 40 mm Neck Offset, 93 mm Build-Up | In distribution |
| 9983-120-32 | 12.0 mm Diameter, 170 mm Stem Length | In distribution |
| 9982-16-13 | 16 mm Diameter, 135 mm Stem Length | In distribution |
| 9980-240-22 | 24.0 mm Diameter, 170 mm Stem Length | In distribution |
| 9997-19-45 | 12/14 Neck Taper, 40 mm Neck Offset, Size C, 45 mm Build-Up | In distribution |
| 9982-16-23 | 16 mm Diameter, 235 mm Stem Length | In distribution |
| 9965-13-13 | Size 13 | In distribution |
| 00-9924-045-13 | 45 mm Neck Offset, 103 mm Build-Up | In distribution |
| 9955-21-10 | Size 21 | In distribution |
| 9965-14-13 | Size 14 | In distribution |
| 9994-18-45 | 12/14 Neck Taper, 46 mm Neck Offset, Size B, 45 mm Build-Up | In distribution |
| 9970-20-46 | 12/14 C-Ring Taper, 46 mm Neck Offset, Size D 35 mm Build-Up | In distribution |
| 9962-18-23 | Size 18, 235 mm Stem Length | In distribution |
Same Product Code
| Product | Sold by | Catalogue numbers |
|---|---|---|
| Libertas | Maxx Orthopedics Inc. | 1,832 |
| Redapt | Smith & Nephew, Inc. | 326 |
| Bencox Hip System | Corentec Co., Ltd. | 295 |
| M-Vizion Femoral Revision System | Medacta International SA | 289 |
| Prosthesis, Hip, Semi-Constrained, Metal/Ceramic/Polymer, Cemented Or Non-Porous, Uncemented | Zimmer, Inc. | 280 |
| Profemur® | Microport Orthopedics Inc. | 229 |
| DJO Surgical | Encore Medical, L.P. | 162 |
| Instrument | Howmedica Osteonics Corp | 152 |
| Alteon | Exactech, Inc. | 151 |
| Prosthesis, Hip, Semi-Constrained, Metal/Ceramic/Polymer, Cemented Or Non-Porous, Uncemented | Exactech, Inc. | 136 |
| Resolve Modular Revision Hip Stem | United Orthopedic Corp. | 136 |
| Wagner SL Revision® | Zimmer, Inc. | 133 |
Showing 12 of 691. All products under Prosthesis, Hip, Semi-Constrained, Metal/Ceramic/Polymer, Cemented Or Non-Porous, Uncemented
510(K) Clearances
| Clearance | Decision date |
|---|---|
| K260831 | 2026-06-16 |
| K260182 | 2026-04-27 |
| K251906 | 2025-07-18 |
| K200112 | 2020-04-10 |
| K192660 | 2020-02-28 |
| K193050 | 2019-12-26 |
| K192189 | 2019-12-18 |
| K193030 | 2019-12-06 |
| K192416 | 2019-10-01 |
| K191781 | 2019-08-06 |
| K181171 | 2019-04-02 |
| K183136 | 2019-01-30 |
| K181761 | 2018-12-26 |
| K182048 | 2018-12-07 |
| K161830 | 2016-10-26 |
| K161192 | 2016-07-08 |
| K131884 | 2013-08-22 |
| K130899 | 2013-05-01 |
| K123392 | 2013-03-04 |
| K113556 | 2012-02-17 |
| K101296 | 2010-07-30 |
| K093846 | 2010-02-04 |
| K081860 | 2008-09-26 |
| K073567 | 2008-03-13 |
| K071535 | 2007-11-19 |
| K040803 | 2004-04-29 |
| K030724 | 2003-06-03 |
| K972690 | 1997-10-15 |
| K971752 | 1997-07-30 |
| K955877 | 1996-10-08 |
| K944601 | 1995-01-12 |
| K915222 | 1993-06-22 |
| K914676 | 1992-01-13 |
| K905739 | 1991-03-07 |
Recalls Naming This Product
15 recalls name this product by its own identifiers, the 510(k) it is cleared under.
| Recalled by | Identified by | Initiated | FDA class | Root cause | Reason | Quantity | Closed |
|---|---|---|---|---|---|---|---|
| Zimmer, Inc. | 510(k) number | 2023-07-26 | Class II | Mixed-up of materials/components | The outer package labeling and product etch are for a Size 6, however, the implant is a Size 4, and vice versa. | 24 units | |
| Zimmer, Inc. | 510(k) number | 2017-02-28 | Class II | Packaging | Zimmer Biomet Inc. initiated a field action on 02/28/2017 for sterile-packaged implants packaged in two different package configurations due to packaging design verification test failures. | 9867 | 2018-02-27 |
| Zimmer, Inc. | 510(k) number | 2017-02-28 | Class II | Packaging | Zimmer Biomet Inc. initiated a field action on 02/28/2017 for sterile-packaged implants packaged in two different package configurations due to packaging design verification test failures. | 9867 | 2018-02-27 |
| Zimmer, Inc. | 510(k) number | 2011-11-16 | Not classified | Nonconforming Material/Component | Lack of assurance of proper metal fatigue strength due to metal grain structure anomaly. In 2006 a recall was initiated as a result of the grain anomaly; however, these 4 lots had been split off during normal production and had not been inc | 1 unit (International Only Switzerland) | 2013-08-28 |
| Zimmer, Inc. | 510(k) number | 2011-11-16 | Not classified | Nonconforming Material/Component | Lack of assurance of proper metal fatigue strength due to metal grain structure anomaly. In 2006 a recall was initiated as a result of the grain anomaly; however, these 4 lots had been split off during normal production and had not been inc | 1 unit (Distributed to Demark) | 2013-08-28 |
| Zimmer, Inc. | 510(k) number | 2011-10-21 | Not classified | Error in labeling | This recall was initiated because it may not be clear to the surgeon whether the device can be used based on the instructions for use. | 119,284 total devices | 2013-08-29 |
| Zimmer, Inc. | 510(k) number | 2011-10-21 | Not classified | Error in labeling | This recall was initiated because it may not be clear to the surgeon whether the device can be used based on the instructions for use. | 119,284 total devices | 2013-08-29 |
| Zimmer, Inc. | 510(k) number | 2011-10-21 | Not classified | Error in labeling | This recall was initiated because it may not be clear to the surgeon whether the device can be used based on the instructions for use. | 119,284 total devices | 2013-08-29 |
| Zimmer, Inc. | 510(k) number | 2011-10-21 | Not classified | Error in labeling | This recall was initiated because it may not be clear to the surgeon whether the device can be used based on the instructions for use. | 119,284 total devices | 2013-08-29 |
| Zimmer, Inc. | 510(k) number | 2009-05-15 | Not classified | Process control | The threads on the screw are incomplete/non-functional. | 10 | 2009-11-12 |
| Zimmer, Inc. | 510(k) number | 2006-08-02 | Not classified | Other | Lack of assurance of proper metal fatigue strength due to a metal grain structure anomaly. | 181 of all devices | 2007-05-04 |
| Zimmer, Inc. | 510(k) number | 2006-08-02 | Not classified | Other | Lack of assurance of proper metal fatigue strength due to a metal grain structure anomaly. | 181 of all devices | 2007-05-04 |
| Zimmer, Inc. | 510(k) number | 2006-08-02 | Not classified | Other | Lack of assurance of proper metal fatigue strength due to a metal grain structure anomaly. | 181 of all devices | 2007-05-04 |
| Zimmer, Inc. | 510(k) number | 2006-08-02 | Not classified | Other | Lack of assurance of proper metal fatigue strength due to a metal grain structure anomaly. | 181 of all devices | 2007-05-04 |
| Zimmer, Inc. | 510(k) number | 2006-08-02 | Not classified | Other | Lack of assurance of proper metal fatigue strength due to a metal grain structure anomaly. | 181 of all devices | 2007-05-04 |
Recalls
31 of these are Class II. Class II means a temporary or reversible health consequence. Volume alone is not a quality signal: a manufacturer that ships more recalls more.
| Initiated | FDA class | Root cause | Reason | Quantity | Closed |
|---|---|---|---|---|---|
| 2025-03-24 | Class II | Under Investigation by firm | The associated product labeling does not adequately provide compatibility information for use of the 22.2 mm Diameter Ceramic Femoral Heads with cobalt-chrome femoral stems or stainless-steel femoral stems. | 215 units | |
| 2025-03-24 | Class II | Under Investigation by firm | The associated product labeling does not adequately provide compatibility information for use of the 22.2 mm Diameter Ceramic Femoral Heads with cobalt-chrome femoral stems or stainless-steel femoral stems. | 167 units | |
| 2025-03-24 | Class II | Under Investigation by firm | The associated product labeling does not adequately provide compatibility information for use of the 22.2 mm Diameter Ceramic Femoral Heads with cobalt-chrome femoral stems or stainless-steel femoral stems. | 416 units | |
| 2025-03-24 | Class II | Under Investigation by firm | The associated product labeling does not adequately provide compatibility information for use of the 22.2 mm Diameter Ceramic Femoral Heads with cobalt-chrome femoral stems or stainless-steel femoral stems. | 160 units | |
| 2025-03-24 | Class II | Under Investigation by firm | The associated product labeling does not adequately provide compatibility information for use of the 22.2 mm Diameter Ceramic Femoral Heads with cobalt-chrome femoral stems or stainless-steel femoral stems. | 158 units | |
| 2025-02-12 | Class II | Under Investigation by firm | There is a potential design issue with the Z1 Offset Stem Inserter leading to fracturing of the distal tip. | 35 units | |
| 2024-08-08 | Class II | Under Investigation by firm | Mislabeled: Incorrect sleeve in the packaging. The outer packaging is labeled as a standard neck sleeve, however, the product within the box is a -6mm neck sleeve, and vice versa. The neck of the sleeve can be identified by the device etchi | 69 units | |
| 2024-08-08 | Class II | Under Investigation by firm | Mislabeled: Incorrect sleeve in the packaging. The outer packaging is labeled as a standard neck sleeve, however, the product within the box is a -6mm neck sleeve, and vice versa. The neck of the sleeve can be identified by the device etchi | 58 units | |
| 2019-10-10 | Class II | Packaging change control | Non-highly polished implants may adhere to the LDPE bag (previous packaging configuration). | 5,459,583 total devices | 2020-05-19 |
| 2019-10-10 | Class II | Packaging change control | Non-highly polished implants may adhere to the LDPE bag (previous packaging configuration). | 5,459,583 total devices | 2020-05-19 |
| 2019-10-10 | Class II | Packaging change control | Non-highly polished implants may adhere to the LDPE bag (previous packaging configuration). | 5,459,583 total devices | 2020-05-19 |
| 2019-10-10 | Class II | Packaging change control | Non-highly polished implants may adhere to the LDPE bag (previous packaging configuration). | 5,459,583 total devices | 2020-05-19 |
| 2018-10-31 | Class II | Process control | Mislabeled Labeled Avenir Mller Stem size 1, the stem inside the packaging is an Avenir Mller Stem size 2. | 13 units | 2020-04-01 |
| 2018-03-29 | Class II | Under Investigation by firm | There is a potential for debris in the hole on the superior lateral aspect of the device as a result of machining which may not have been adequately removed during the subsequent cleaning process. | 1,145 distribution events. Note that this product is lot con | 2019-12-17 |
| 2018-02-28 | Class II | Error in labeling | A potential commingle that could result in the product in the package not matching the product on the outer label. | 2019-10-25 | |
| 2018-02-28 | Class II | Error in labeling | A potential commingle that could result in the product in the package not matching the product on the outer label. | 2019-10-25 | |
| 2017-02-28 | Class II | Packaging | Zimmer Biomet Inc. initiated a field action on 02/28/2017 for sterile-packaged implants packaged in two different package configurations due to packaging design verification test failures. | 9867 | 2018-02-27 |
| 2016-06-30 | Class II | Labeling mix-ups | Product mix-up. The Avenir Mller Stem 6 lateral uncemented might be placed in the packaging of the Avenir Mller Stem 4 standard uncemented and vice versa. Potential for delay in surgery, and/or potential for use of incorrect implant which | 2 | 2017-03-27 |
| 2015-02-05 | Class II | Process control | PMMA coating does not meet specifications. Area of the stem may be missing PMMA coating. | 1 unit | 2015-09-23 |
| 2014-12-17 | Class II | Package design/selection | Potential compromise of the inner sterile tray. If a compromised tray is detected, a delay in surgery may result. If undetected breach in both the inner and outer trays were to occur, and there is contamination present, a periprosthetic inf | 10340 | 2015-09-23 |
| 2012-09-04 | Class II | Error in labeling | Zimmer Inc., is initiating a correction to the patient labels of products manufactured before March 2010 by the Zimmer GmbH production site in Winterthur, Switzerland, after receiving four complaints of a discrepancy between product patient | 1355 | 2014-04-16 |
| 2012-09-04 | Class II | Error in labeling | Zimmer Inc., is initiating a correction to the patient labels of products manufactured before March 20I0 by the Zimmer GmbH production site in Winterthur, Switzerland, after receiving four complaints of a discrepancy between product patient | 88 | 2014-04-16 |
| 2012-09-04 | Class II | Error in labeling | Zimmer Inc., is initiating a correction to the patient labels of products manufactured before March 20I0 by the Zimmer GmbH production site in Winterthur, Switzerland, after receiving four complaints of a discrepancy between product patient | 56 | 2014-04-16 |
| 2012-09-04 | Class II | Error in labeling | Zimmer Inc., is initiating a correction to the patient labels of products manufactured before March 20I0 by the Zimmer GmbH production site in Winterthur, Switzerland, after receiving four complaints of a discrepancy between product patient | 87 | 2014-04-16 |
| 2012-09-04 | Class II | Error in labeling | Zimmer Inc., is initiating a correction to the patient labels of products manufactured before March 20I0 by the Zimmer GmbH production site in Winterthur, Switzerland, after receiving four complaints of a discrepancy between product patient | 30 | 2014-04-16 |
| 2012-09-04 | Class II | Error in labeling | Zimmer Inc., is initiating a correction to the patient labels of products manufactured before March 20I0 by the Zimmer GmbH production site in Winterthur, Switzerland, after receiving four complaints of a discrepancy between product patient | 2544 | 2014-04-16 |
| 2012-09-04 | Class II | Error in labeling | Zimmer Inc., is initiating a correction to the patient labels of products manufactured before March 20I0 by the Zimmer GmbH production site in Winterthur, Switzerland, after receiving four complaints of a discrepancy between product patient | 13 | 2014-04-16 |
| 2012-09-04 | Class II | Error in labeling | Zimmer Inc., is initiating a correction to the patient labels of products manufactured before March 20I0 by the Zimmer GmbH production site in Winterthur, Switzerland, after receiving four complaints of a discrepancy between product patient | 58 | 2014-04-16 |
| 2012-09-04 | Class II | Error in labeling | Zimmer Inc., is initiating a correction to the patient labels of products manufactured before March 20I0 by the Zimmer GmbH production site in Winterthur, Switzerland, after receiving four complaints of a discrepancy between product patient | 5 | 2014-04-16 |
| 2012-09-04 | Class II | Error in labeling | Zimmer Inc., is initiating a correction to the patient labels of products manufactured before March 20I0 by the Zimmer GmbH production site in Winterthur, Switzerland, after receiving four complaints of a discrepancy between product patient | 18 | 2014-04-16 |
| 2012-09-04 | Class II | Error in labeling | Zimmer Inc., is initiating a correction to the patient labels of products manufactured before March 20I0 by the Zimmer GmbH production site in Wintetthur, Switzerland, after receiving four complaints of a discrepancy between product patient | 126 | 2014-04-16 |
| 2009-05-29 | Not classified | Packaging process control | The corner tab of the inner compartment lid was not folded under before the outer lid was sealed, resulting in lack of assurance of sterility. | 147 of both products | 2009-12-22 |
| 2008-06-11 | Not classified | Device Design | When used with cobalt/chromium hip stems, the average test values for ceramic head bursting falls below the guidance document limits if the taper is made by casting instead of by forging. | 49,474 of all products | 2009-11-10 |
| 2008-06-11 | Not classified | Device Design | When used with cobalt/chromium hip stems, the average test values for ceramic head bursting falls below the guidance document limits if the taper is made by casting instead of by forging. | 49,474 of all products | 2009-11-10 |
| 2008-06-11 | Not classified | Device Design | When used with cobalt/chromium hip stems, the average test values for ceramic head bursting falls below the guidance document limits if the taper is made by casting instead of by forging. | 49,474 of all products | 2009-11-10 |
| 2008-06-11 | Not classified | Device Design | When used with cobalt/chromium hip stems, the average test values for ceramic head bursting falls below the guidance document limits if the taper is made by casting instead of by forging. | 49,474 of all products | 2009-11-10 |
| 2008-06-11 | Not classified | Device Design | When used with cobalt/chromium hip stems, the average test values for ceramic head bursting falls below the guidance document limits if the taper is made by casting instead of by forging. | 49,474 of all products | 2009-11-10 |
| 2008-06-11 | Not classified | Device Design | When used with cobalt/chromium hip stems, the average test values for ceramic head bursting falls below the guidance document limits if the taper is made by casting instead of by forging. | 49,474 of all products | 2009-11-10 |
| 2003-01-06 | Not classified | Other | Compression test results are not in accordance with device approval submission | 2003-12-04 | |
| 2003-01-06 | Not classified | Other | Compression test results are not in accordance with device approval submission | 2003-12-04 |
Source: U.S. FDA establishment registration and device listing records, public domain. Restructured for clarity and searchability. Not affiliated with or endorsed by the FDA. Records are records: nothing here is an offer of sale.