Comprehensive Instrumentation
16 catalogue numbers from 405968, listed by Biomet Orthopedics, United States, under Prosthesis, Shoulder, Semi-Constrained, Metal/Polymer + Additive, Cemented. 2 manufacturers in China are registered for this product code.
2manufacturers in China registered for this device type
16catalogue numbers in this listing
Who Else Makes It
Concentrated in Shanghai (1), Jiangsu (1).
| Manufacturer | City | Province | Registered as | Device types |
|---|---|---|---|---|
| Zimmer (Shanghai) Medical International Trading Co., Ltd. | Shanghai | Shanghai | Exporter | 106 |
| Changzhou Biomet Medical Devices Co., Ltd. | Changzhou | Jiangsu | Contract manufacturer | 54 |
Record
| Listed by | Biomet Orthopedics, United States |
|---|---|
| FDA product code | PAO |
| Device type | Prosthesis, Shoulder, Semi-Constrained, Metal/Polymer + Additive, Cemented |
| Device class | Class 2 |
| Regulation | 21 CFR 888.3660 |
| 510(k) | K080642 |
| Record published | 2017-07-28 |
| Record revised | 2025-05-30 (version 6) |
Specifications
| MRI safety | Labeling does not contain MRI Safety Information |
|---|---|
| Sterilisation | Moist Heat or Steam Sterilization |
| Prescription | Prescription only |
| Label carries | lot or batch number, manufacturing date |
Catalogue Numbers
| Catalogue number | Size | Status |
|---|---|---|
| 405968 | In distribution | |
| 405995 | In distribution | |
| 405988 | 44 mm +10 mm – 41 mm STD +3 | In distribution |
| 405985 | In distribution | |
| 405826 | In distribution | |
| 405945 | In distribution | |
| 405823 | In distribution | |
| 405950 | 44 mm STD – 36 mm STD +3 | In distribution |
| 405816 | In distribution | |
| 405940 | 44 mm STD – 36 mm STD | In distribution |
| 405978 | 44 mm +10 mm – 41 mm STD | In distribution |
| 405975 | In distribution | |
| 405950 | In distribution | |
| 405810 | In distribution | |
| 405980 | In distribution | |
| 405998 | In distribution |
Same Product Code
| Product | Sold by | Catalogue numbers |
|---|---|---|
| DJO Surgical | Encore Medical, L.P. | 85 |
| Perform™ Humeral System | Tornier Inc. | 76 |
| Comprehensive® Reverse Shoulder | Biomet Orthopedics | 68 |
| Link Embrace Shoulder System | Waldemar Link GmbH & Co. KG | 64 |
| Anatomical Shoulder™ Domelock® | Zimmer, Inc. | 43 |
| Comprehensive® Shoulder System | Biomet Orthopedics | 38 |
| Link Embrace Shoulder System Line Extension | Waldemar Link GmbH & Co. KG | 32 |
| Inhance | Depuy (Ireland) | 31 |
| Tornier Perform Humeral System | Tornier Inc. | 17 |
| Embrace Shoulder System | Waldemar Link GmbH & Co. KG | 13 |
| Maestro™ Total Wrist | Biomet Orthopedics | 13 |
| Comprehensive® | Zimmer, Inc. | 11 |
Showing 12 of 29. All products under Prosthesis, Shoulder, Semi-Constrained, Metal/Polymer + Additive, Cemented
Recalls Naming This Product
20 recalls name this product by its own identifiers, the 510(k) it is cleared under.
| Recalled by | Identified by | Initiated | FDA class | Root cause | Reason | Quantity | Closed |
|---|---|---|---|---|---|---|---|
| Biomet, Inc. | 510(k) number | 2021-01-15 | Class II | Labeling Change Control | Zimmer Biomet is conducting a lot specific medical device recall for the Comprehensive Reverse Shoulder Central Screw, 25 MM Length. It has been determined through a complaint investigation that a 40 MM length central screw was packaged a | 49 | 2023-03-09 |
| Biomet, Inc. | 510(k) number | 2020-11-25 | Class II | Process control | Specific lots of multiple sterile medical devices may have a breach in the sterile seal. A breach in the packaging seal could lead to loss of sterility of the device. | 7428 | 2024-05-08 |
| Biomet, Inc. | 510(k) number | 2020-09-02 | Class II | Packaging process control | Product potentially being packaged without a taper adapter or baseplate. The package should contain one (1) baseplate and one (1) taper adapter, product may be packaged with two (2) baseplates and no (0) adapters or with no (0) baseplates a | 3 units | 2020-12-31 |
| Biomet, Inc. | 510(k) number | 2020-04-17 | Class II | Process control | Potential presence of elevated endotoxin levels that exceed the specification limit | 122 units | 2021-06-25 |
| Biomet, Inc. | 510(k) number | 2020-03-13 | Class II | Under Investigation by firm | There were unknown bioburden levels prior to sterilization, which may affect sterility of the product. | 125 | 2021-07-21 |
| Biomet, Inc. | 510(k) number | 2017-02-17 | Class II | Process design | Endotoxin levels higher than process maximum limits were discovered in the identified polyethylene components. | 28,253 in total | 2018-01-29 |
| Biomet, Inc. | 510(k) number | 2016-12-20 | Class I | Device Design | Higher than anticipated rate of fracturing due to design. Risk of revision surgery due to fracturing. | 4388 | 2017-08-29 |
| Biomet, Inc. | 510(k) number | 2013-05-15 | Class II | Device Design | Biomet has initiated this action following an investigation which identified that the slot on the resection guide is offset in the wrong direction. When the slot on the resection guide is offset in the wrong direction, the Steinman pin that | 17 | 2014-06-09 |
| Biomet, Inc. | 510(k) number | 2011-04-22 | Not classified | Employee error | The firm is initiating this recall following an investigation which identified the rare possibility that certain units of Comprehensive Reverse Shoulder Humeral Trays may contain a locking ring that is incorrectly assembled. | 1,575 units all products | 2013-02-21 |
| Biomet, Inc. | 510(k) number | 2011-04-22 | Not classified | Employee error | The firm is initiating this recall following an investigation which identified the rare possibility that certain units of Comprehensive Reverse Shoulder Humeral Trays may contain a locking ring that is incorrectly assembled. | 1,575 units all products | 2013-02-21 |
| Biomet, Inc. | 510(k) number | 2011-04-22 | Not classified | Employee error | The firm is initiating this recall following an investigation which identified the rare possibility that certain units of Comprehensive Reverse Shoulder Humeral Trays may contain a locking ring that is incorrectly assembled. | 1575 all products | 2013-02-21 |
| Biomet, Inc. | 510(k) number | 2011-04-22 | Not classified | Employee error | The firm is initiating this recall following an investigation which identified the rare possibility that certain units of Comprehensive Reverse Shoulder Humeral Trays may contain a locking ring that is incorrectly assembled. | 1575 units all products | 2013-02-21 |
| Biomet, Inc. | 510(k) number | 2011-04-22 | Not classified | Employee error | The firm is initiating this recall following an investigation which identified the rare possibility that certain units of Comprehensive Reverse Shoulder Humeral Trays may contain a locking ring that is incorrectly assembled. | 1575 all products | 2013-02-21 |
| Biomet, Inc. | 510(k) number | 2011-04-22 | Not classified | Employee error | The firm is initiating this recall following an investigation which identified the rare possibility that certain units of Comprehensive Reverse Shoulder Humeral Trays may contain a locking ring that is incorrectly assembled. | 1575 all products | 2013-02-21 |
| Biomet, Inc. | 510(k) number | 2011-04-22 | Not classified | Employee error | The firm is initiating this recall following an investigation which identified the rare possibility that certain units of Comprehensive Reverse Shoulder Humeral Trays may contain a locking ring that is incorrectly assembled. | 1575 all products | 2013-02-21 |
| Biomet, Inc. | 510(k) number | 2011-04-22 | Not classified | Employee error | The firm is initiating this recall following an investigation which identified the rare possibility that certain units of Comprehensive Reverse Shoulder Humeral Trays may contain a locking ring that is incorrectly assembled. | 1575 all products. | 2013-02-21 |
| Biomet, Inc. | 510(k) number | 2011-04-22 | Not classified | Employee error | The firm is initiating this recall following an investigation which identified the rare possibility that certain units of Comprehensive Reverse Shoulder Humeral Trays may contain a locking ring that is incorrectly assembled. | 1,575 all products | 2013-02-21 |
| Biomet, Inc. | 510(k) number | 2011-04-22 | Not classified | Employee error | The firm is initiating this recall following an investigation which identified the rare possibility that certain units of Comprehensive Reverse Shoulder Humeral Trays may contain a locking ring that is incorrectly assembled. | 1575 all products | 2013-02-21 |
| Biomet, Inc. | 510(k) number | 2010-09-13 | Not classified | Pending | The firm received complaints regarding fracturing of the device. | 45 both products | 2011-07-27 |
| Biomet, Inc. | 510(k) number | 2010-09-13 | Not classified | Pending | The firm received complaints regarding fracturing of the device. | 45 both products | 2011-07-27 |
Source: U.S. FDA establishment registration and device listing records, public domain. Restructured for clarity and searchability. Not affiliated with or endorsed by the FDA. Records are records: nothing here is an offer of sale.