Delta Xtend
Delta Xtend is a reverse shoulder replacement system with humeral stem, modular epiphysis, spacer, cup, glenosphere and metaglene baseplate components. The glenosphere and metaglene form…
Delta Xtend is a reverse shoulder replacement system with humeral stem, modular epiphysis, spacer, cup, glenosphere and metaglene baseplate components. The glenosphere and metaglene form the glenoid side of the reverse articulation.
A humeral spacer can be placed between the epiphysis and cup when required. A humeral-head configuration can instead support specified hemiarthroplasty procedures.
Listed Item
Delta Xtend REVERSE SHOULDER SYSTEM AUGMENTED CENTRAL SCREW METAGLENE 2MM LATERALIZED
Fixation Components
The metaglene is hydroxyapatite-coated and fixed without cement using screws. Hydroxyapatite-coated modular humeral stems and epiphyses are also intended for cementless fixation. Component selection depends on the reverse or hemi-shoulder configuration and compatible fixation arrangement.
9manufacturers in China registered for this device type
38catalogue numbers in this listing
4510(k) clearances naming this product code
Who Else Makes It
Concentrated in Jiangsu (5), Shanghai (3), Zhejiang (1). 2 of them are registered as contract manufacturers, able to build to a buyer’s own specification.
| Manufacturer | City | Province | Registered as | Device types |
|---|---|---|---|---|
| Stryker Orthmed (Changzhou) Medical Instrument Co., Ltd. | Changzhou | Jiangsu | Contract manufacturer | 10 |
| Stryker Trauson (Changzhou) Medical Technology Co., Ltd. | Changzhou | Jiangsu | Contract manufacturer | 3 |
| Zimmer (Shanghai) Medical International Trading Co., Ltd. | Shanghai | Shanghai | Exporter | 106 |
| Zhejiang Biomet Medical Products Co., Ltd. | Jinhua | Zhejiang | Contract manufacturer | 74 |
| Shanghai JPY ION-Tech Co., Ltd. | Shanghai | Shanghai | Contract manufacturer | 70 |
| Changzhou Biomet Medical Devices Co., Ltd. | Changzhou | Jiangsu | Contract manufacturer | 54 |
| Arthrex (Shanghai) Co., Ltd. | Shanghai | Shanghai | Exporter | 38 |
| Johnson & Johnson Medical (Depuy – Suzhou) Ltd. | Suzhou | Jiangsu | Manufacturer | 34 |
| Changzhou Atomic HI-Tech Radiation Co., Ltd. | Changzhou | Jiangsu | Contract manufacturer | 8 |
Record
| Listed by | Depuy (Ireland), Ireland |
|---|---|
| FDA product code | PHX |
| Device type | Shoulder Prosthesis, Reverse Configuration |
| Device class | Class 2 |
| Regulation | 21 CFR 888.3660 |
| Establishment | Specification developer, Repacker / relabeller, Manufacturer |
| 510(k) | K183077 |
| Record published | 2019-05-22 |
| Record revised | 2024-06-06 (version 7) |
Specifications
| MRI safety | MR Conditional |
|---|---|
| Sterilisation | Moist Heat or Steam Sterilization |
| Supplied sterile | Yes |
| Single use | Yes |
| Prescription | Prescription only |
| Label carries | lot or batch number, expiry date |
Catalogue Numbers
| Catalogue number | Size | Status |
|---|---|---|
| 1307-62-142 | In distribution | |
| 1307-64-142 | In distribution | |
| 1307-40-102 | In distribution | |
| 2307-70-016 | In distribution | |
| 130712000 | In distribution | |
| 1307-20-112 | In distribution | |
| 130760000 | In distribution | |
| 1337-66-038 | In distribution | |
| 1337-68-138 | In distribution | |
| 1337-62-142 | In distribution | |
| 2307-70-008 | In distribution | |
| 1309-60-345 | In distribution | |
| 1307-64-042 | In distribution | |
| 1307-30-201 | In distribution | |
| 130720101 | In distribution | |
| 1309-60-010 | In distribution | |
| 130720202 | In distribution | |
| 2307-90-003 | In distribution | |
| 130720203 | In distribution | |
| 1337-61-042 | In distribution | |
| 1307-30-203 | In distribution | |
| 1337-68-042 | In distribution | |
| 1307-62-042 | In distribution | |
| 1307-68-042 | In distribution | |
| 1309-70-800 | In distribution | |
| 2307-74-008 | In distribution | |
| 130720103 | In distribution | |
| 1307-66-138 | In distribution | |
| 1309-70-200 | In distribution | |
| 130716000 | In distribution | |
| 1309-60-015 | In distribution | |
| 130720102 | In distribution | |
| 1309-60-335 | In distribution | |
| 130720201 | In distribution | |
| 1307-64-138 | In distribution | |
| 130710000 | In distribution | |
| 1309-70-850 | In distribution | |
| 130714000 | In distribution |
Same Product Code
| Product | Sold by | Catalogue numbers |
|---|---|---|
| Arthrex® | Arthrex, Inc. | 297 |
| FX V135 | Fx Shoulder Solutions SAS | 131 |
| Prima TT Glenoid | Limacorporate | 129 |
| Shoulder Innovations Inset Reverse Total Shoulder | Shoulder Innovations, Inc | 124 |
| Equinoxe | Exactech, Inc. | 123 |
| Veritas rTSA | restor3d, inc. | 112 |
| DJO Surgical | Encore Medical, L.P. | 109 |
| R1 Reverse Shoulder System | Catalyst Orthoscience Inc | 100 |
| Tornier Perform™ Humeral System | Tornier Inc. | 96 |
| MSS – Monobloc stem | Medacta International SA | 92 |
| SMR Shoulder | Limacorporate | 90 |
| Humelock II Cemented Reversible Shoulder | Fx Solutions | 83 |
Showing 12 of 232. All products under Shoulder Prosthesis, Reverse Configuration
510(K) Clearances
| Clearance | Decision date |
|---|---|
| K192855 | 2020-02-24 |
| K192448 | 2019-10-04 |
| K183077 | 2019-05-17 |
| K101996 | 2010-12-15 |
Recalls Naming This Product
18 recalls name this product by its own identifiers, the 510(k) it is cleared under.
| Recalled by | Identified by | Initiated | FDA class | Root cause | Reason | Quantity | Closed |
|---|---|---|---|---|---|---|---|
| Depuy Orthopaedics, Inc. | 510(k) number | 2021-12-07 | Class II | Equipment maintenance | Stems may have an undersized spigot bore diameter therefore separating the proximal body from the stem may not be possible without surgical delay and/or bone damage | 28 units | 2024-05-17 |
| Depuy Orthopaedics, Inc. | 510(k) number | 2021-12-07 | Class II | Equipment maintenance | Stems may have an undersized spigot bore diameter therefore separating the proximal body from the stem may not be possible without surgical delay and/or bone damage | 432 units | 2024-05-17 |
| Depuy Orthopaedics, Inc. | 510(k) number | 2021-12-07 | Class II | Equipment maintenance | Stems may have an undersized spigot bore diameter therefore separating the proximal body from the stem may not be possible without surgical delay and/or bone damage | 3 units | 2024-05-17 |
| Depuy Orthopaedics, Inc. | 510(k) number | 2021-12-07 | Class II | Equipment maintenance | Stems may have an undersized spigot bore diameter therefore separating the proximal body from the stem may not be possible without surgical delay and/or bone damage | 781 units | 2024-05-17 |
| Depuy Orthopaedics, Inc. | 510(k) number | 2021-12-07 | Class II | Equipment maintenance | Stems may have an undersized spigot bore diameter therefore separating the proximal body from the stem may not be possible without surgical delay and/or bone damage | 3 units | 2024-05-17 |
| Depuy Orthopaedics, Inc. | 510(k) number | 2021-12-07 | Class II | Equipment maintenance | Stems may have an undersized spigot bore diameter therefore separating the proximal body from the stem may not be possible without surgical delay and/or bone damage | 870 units | 2024-05-17 |
| Depuy Orthopaedics, Inc. | 510(k) number | 2021-12-07 | Class II | Equipment maintenance | Stems may have an undersized spigot bore diameter therefore separating the proximal body from the stem may not be possible without surgical delay and/or bone damage | 451 units | 2024-05-17 |
| Depuy Orthopaedics, Inc. | 510(k) number | 2021-12-07 | Class II | Equipment maintenance | Stems may have an undersized spigot bore diameter therefore separating the proximal body from the stem may not be possible without surgical delay and/or bone damage | 140 units | 2024-05-17 |
| Depuy Orthopaedics, Inc. | 510(k) number | 2017-08-31 | Class II | Nonconforming Material/Component | The affected lots are being recalled because the epiphysis may not assemble to the stem, which may cause a surgical delay. | 23,053 units | 2020-03-12 |
| Depuy Orthopaedics, Inc. | 510(k) number | 2017-08-31 | Class II | Nonconforming Material/Component | The affected lots are being recalled because the epiphysis may not assemble to the stem, which may cause a surgical delay. | Quantities co-mingled under initial product | 2020-03-12 |
| Depuy Orthopaedics, Inc. | 510(k) number | 2008-07-10 | Not classified | Device Design | Compressed air may become trapped between the cup and the stem, preventing the tapered walls from engaging and causing the cup to feel unstable. | 1,521 of all devices. | 2009-10-28 |
| Depuy Orthopaedics, Inc. | 510(k) number | 2008-07-10 | Not classified | Device Design | Compressed air may become trapped between the cup and the stem, preventing the tapered walls from engaging and causing the cup to feel unstable. | 1,521 of all devices. | 2009-10-28 |
| Depuy Orthopaedics, Inc. | 510(k) number | 2008-07-10 | Not classified | Device Design | Compressed air may become trapped between the cup and the stem, preventing the tapered walls from engaging and causing the cup to feel unstable. | 1,521 of all devices. | 2009-10-28 |
| Depuy Orthopaedics, Inc. | 510(k) number | 2008-07-10 | Not classified | Device Design | Compressed air may become trapped between the cup and the stem, preventing the tapered walls from engaging and causing the cup to feel unstable. | 1,521 of all devices. | 2009-10-28 |
| Depuy Orthopaedics, Inc. | 510(k) number | 2008-07-10 | Not classified | Device Design | Compressed air may become trapped between the cup and the stem, preventing the tapered walls from engaging and causing the cup to feel unstable. | 1, 521 of all devices. | 2009-10-28 |
| Depuy Orthopaedics, Inc. | 510(k) number | 2008-07-10 | Not classified | Device Design | Compressed air may become trapped between the cup and the stem, preventing the tapered walls from engaging and causing the cup to feel unstable. | 1, 521 of all devices. | 2009-10-28 |
| Depuy Orthopaedics, Inc. | 510(k) number | 2008-07-10 | Not classified | Device Design | Compressed air may become trapped between the cup and the stem, preventing the tapered walls from engaging and causing the cup to feel unstable. | 1,521 of all devices. | 2009-10-28 |
| Depuy Orthopaedics, Inc. | 510(k) number | 2008-07-10 | Not classified | Device Design | Compressed air may become trapped between the cup and the stem, preventing the tapered walls from engaging and causing the cup to feel unstable. | 1,521 of all devices. | 2009-10-28 |
Source: U.S. FDA establishment registration and device listing records, public domain. Restructured for clarity and searchability. Not affiliated with or endorsed by the FDA. Records are records: nothing here is an offer of sale.