Removal Drill, 13.0 Mm
A cannulated drill bit that attaches to a surgical power tool. It is used over a guide pin to remove bone leading up to or covering the proximal head of a CurvaFix Implant.
Hip Access System Withcurved Blade
Hip Access System withCurved Blade: 1 catalogue number listed by T.A.G Medical Products Agricultural Cooperative Association, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
Green Genie Suture Passer
Intended to aid in the passing of sutures through bone and soft tissue during orthopedic surgery
AP Sizer With Short Legs
Catalogue number SRI-10050, listed by Total Joint Orthopedics, Inc., United States, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
Universal Cone Trial, Size 1, 12°
Cone Trial, Size 1, 12 degrees
Anatomic Trial Sizer With Stop 18×16, H10mm
Catalogue number RO0386A31018X16, listed by Spineup Inc, United States, under Template. 21 manufacturers in China are registered for this product code.
Patient Orient Dev – Pre-Op
A non-invasive reusable instrument intended to be used to support an orthopaedic surgical procedure
Romero Lordotic Rasp With Stop 14×14, H112 Mm
Romero Lordotic Rasp with Stop 14x14, H12 mm
Ecmes®extracting Forceps
Catalogue number M21900, listed by Biomet Orthopedics, United States, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
Screw Holding Sleeve, Mini
Catalogue number 8140-99-475, listed by Biomet Orthopedics, United States, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
Lordotic Trial Sizer With Stop 16×16, H05mm
Catalogue number RO0551LD0516X16, listed by Spineup Inc, United States, under Template. 21 manufacturers in China are registered for this product code.
8.5mm Full Thickness Drill
8.5mm Full Thickness Drill: 1 catalogue number listed by T.A.G Medical Products Agricultural Cooperative Association, under Trephine. 6 manufacturers in China are registered for this product code.
9.5X380MM Bullet-TIP Reamer
Catalogue number SSI005996, listed by Zimmer, Inc., United States, under Reamer. 23 manufacturers in China are registered for this product code.
Standard Handle M8 Blue
Catalogue number H5000060019, listed by HPF SRL, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
Flag Ratchet Handle Cannulated Yellow
Catalogue number H1500040559, listed by HPF SRL, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
Fast Guide Converter Handle
Catalogue number 2312-18-010, listed by Biomet Orthopedics, United States, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
G7 Straight Inserter Version Guide
Catalogue number SSI005583, listed by Zimmer, Inc., United States, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
3.0MM Drill Accessory Pack
Catalogue number 1004-003, listed by ECA Medical Instruments, United States, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
Anatomic Trial Sizer With Stop 20×12, H08mm
Catalogue number RO0394AG0820X12, listed by Spineup Inc, United States, under Template. 21 manufacturers in China are registered for this product code.
Fanelli Calibrated Probe
Catalogue number 909799, listed by Biomet Orthopedics, United States, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
Romero Lordotic Rasp With Stop 16×16, H05mm
Romero Lordotic Rasp with Stop 16x16, H05 mm
Straight Handle FOR Delta CUP Extraction
Catalogue number H0050052599, listed by HPF SRL, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
Enztec Classic OCI X – Corin
Catalogue number 4252-2320, listed by Enztec Limited, New Zealand, under Impactor. 18 manufacturers in China are registered for this product code.
U2 Hip Stem
Catalogue number 9104-1204, listed by United Orthopedic Corp., Taiwan, under Extractor. 15 manufacturers in China are registered for this product code.
Reprocessed 2.0mm Cannulated Hex Driver
Catalogue number HT-1120, listed by Suretek Medical, United States, under Bit, Drill. 27 manufacturers in China are registered for this product code.
Anatomic Trial Sizer 16×16, H13mm
Catalogue number RO1259AD1316X16, listed by Spineup Inc, United States, under Template. 21 manufacturers in China are registered for this product code.
Romero Lordotic Rasp With Stop 20×16, H05mm
Catalogue number RO0211LI0520X16, listed by Spineup Inc, United States, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
Distal Reamer – Ø15 275mm
Catalogue number 111-552-315, listed by Signature Orthopaedics PTY Limited, Australia, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
Nexgen®
Catalogue number 00-5887-056-00, listed by Zimmer Trabecular Metal Technology, Inc., United States, under Driver, Prosthesis. 9 manufacturers in China are registered for this product code.
Drop Handle M8 Night Blue
Catalogue number H1500050209, listed by HPF SRL, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
Ascot
Catalogue number Screwdriver, listed by Signus Medizintechnik Gmbh, Germany, under Screwdriver. 18 manufacturers in China are registered for this product code.
Citrelock ACL 10.5mm Femoral Reamer
Catalogue number 40-103-3105, listed by Acuitive Technologies, United States, under Reamer. 23 manufacturers in China are registered for this product code.
Sternal Wire Twister Needle Holder
Sternal Wire Twister Needle Holder Tungsten Carbide Serrated Broad TIP
Implant Holder With Drill Guides W14 X H08 Mm
Catalogue number RO0804I108, listed by Spineup Inc, United States, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
Versanail®awl Stylus Large
Catalogue number 2810-01-125, listed by Biomet Orthopedics, United States, under Awl. 13 manufacturers in China are registered for this product code.
HUM TR LT +0MM EXT 40 +0 UNF
Catalogue number SSI007952, listed by Zimmer, Inc., United States, under Template. 21 manufacturers in China are registered for this product code.
Triverse Tibia Insert Trial Combo, 71-75×10
Catalogue number 122-22-8150, listed by Signature Orthopaedics PTY Limited, Australia, under Template. 21 manufacturers in China are registered for this product code.
Nebula Stem, Broach, Size 11
Catalogue number 111-591-011, listed by Signature Orthopaedics PTY Limited, Australia, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
Triverse Tibia Insert Trial Combo, 71-75×13
Catalogue number 122-22-8153, listed by Signature Orthopaedics PTY Limited, Australia, under Template. 21 manufacturers in China are registered for this product code.
Distraction Tube – Left
Catalogue number LV01290, listed by Highridge Medical, LLC, United States, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
11MM Bone Dowel Plunger
Catalogue number 900726, listed by Biomet Orthopedics, United States, under Trephine. 6 manufacturers in China are registered for this product code.
Stripper, Surgical
TENDON STRIPPER UNIVERSAL 300MM SZ 8MM by Pässler, dull, graduated, take-apart, reusable
Retrograde Thumb Screw
Catalogue number 14-442059, listed by Biomet Orthopedics, United States, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
Pear Handle
Catalogue number 14317, listed by Biomet Orthopedics, United States, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
Anatomic Trial Sizer 18×12, H06mm
Catalogue number RO1262AE0618X12, listed by Spineup Inc, United States, under Template. 21 manufacturers in China are registered for this product code.
“T” Handle M8 Night Blue
Catalogue number H1500050159, listed by HPF SRL, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
Table Cutters
Catalogue number 132-112-144, listed by Signature Orthopaedics PTY Limited, Australia, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
OSS RS 9CM Proximal Tibial
Catalogue number 32-472153, listed by Biomet Orthopedics, United States, under Template. 21 manufacturers in China are registered for this product code.
In-Line Ratchet Handle
Catalogue number 2201-5001, listed by Captiva Spine, Inc., United States, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
1.0MM/1.5MM System
Catalogue number 01-7172, listed by Biomet Microfixation, United States, under Cutter, Wire. 10 manufacturers in China are registered for this product code.
Hip Suture Grasper
Hip Suture Grasper: 1 catalogue number listed by T.A.G Medical Products Agricultural Cooperative Association, under Passer. 6 manufacturers in China are registered for this product code.
Reprocessed Ectra II, Retrograde Knife
Catalogue number 4449, listed by Suretek Medical, United States, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
Keyfix Bone Drill 9g
Catalogue number 900204, listed by G21 SRL, under Bit, Drill. 27 manufacturers in China are registered for this product code.
Fixed Reamer, 9.5 MM
Catalogue number 29414, listed by Biomet Orthopedics, United States, under Reamer. 23 manufacturers in China are registered for this product code.
Reprocessed 4.0mm Drill, Green Stripe, Cannulated
Catalogue number OS900038, listed by Suretek Medical, United States, under Bit, Drill. 27 manufacturers in China are registered for this product code.
Lordotic Trial Sizer With Stop 20×14, H07mm
Catalogue number RO0603LH0720X14, listed by Spineup Inc, United States, under Template. 21 manufacturers in China are registered for this product code.
Cervical Drill Revision With Stop L22
Catalogue number GN0104D222, listed by Spineup Inc, United States, under Bit, Drill. 27 manufacturers in China are registered for this product code.
DSS™ Retaining Forceps, Rigid Coupler
Catalogue number DAT70100, listed by Paradigm Spine GmbH, Germany, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
HEX Extractor, Long Hudson
Catalogue number 2141-26-135, listed by Biomet Orthopedics, United States, under Screwdriver. 18 manufacturers in China are registered for this product code.
TIB BLK Right 0 DEG Slope
Catalogue number SSI000789, listed by Zimmer, Inc., United States, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
Tensioner
Catalogue number Gen 3, listed by Empirical Spine, Inc., United States, under Accessories, Fixation, Spinal Intervertebral Body. 1 manufacturer in China is registered for this product code.
Distal Hip Reamer, Sz 8
Catalogue number 1349.08.000, listed by Total Joint Orthopedics, Inc., United States, under Reamer. 23 manufacturers in China are registered for this product code.
TVP System (Vertebra Plasty SET B)
1) Vertebro puncture needle It includes instruments for puncturing living tissue, such as drills and reamers, and instruments used to enlarge the punctured area for inserting prostheses…
PSN 0 DEG TIB SZ PLT SZ F, LT
Catalogue number SSI008502, listed by Zimmer, Inc., United States, under Template. 21 manufacturers in China are registered for this product code.
SSI DST Agmt Prov C 15MM
Catalogue number SSI006528, listed by Zimmer, Inc., United States, under Template. 21 manufacturers in China are registered for this product code.
Acura Stabilization System
Catalogue number F004.0083, listed by Bioalign Inc., under Bender. 10 manufacturers in China are registered for this product code.
Screw Driver Handle Small
Catalogue number 20653, listed by Biopro, Inc., United States, under Screwdriver. 18 manufacturers in China are registered for this product code.
A.l.p.s. Foottemplate Talar Fracture Plate
Catalogue number 2142-75-001, listed by Biomet Orthopedics, United States, under Template. 21 manufacturers in China are registered for this product code.
Distraction Tube – Right
Catalogue number LV01291, listed by Highridge Medical, LLC, United States, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
Type a Broach Size 18
Catalogue number 111-18-1808, listed by Signature Orthopaedics PTY Limited, Australia, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
Spacer Block G/H 10mm
Catalogue number SSI006658, listed by Zimmer, Inc., United States, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
Comp Rvs 41mm Translucent Glenopshere Prov +3
Catalogue number SSI006997, listed by Zimmer, Inc., United States, under Template. 21 manufacturers in China are registered for this product code.
T-Handle Cann Hud-Mod
Catalogue number 202-0802, listed by OsteoCentric Technologies,Inc, United States, under Screwdriver. 18 manufacturers in China are registered for this product code.
Osteocool KIT Bone Access 10g 090
KIT OCN002 Osteocool Bone Access 10G 090
Fixed Small Axial Handle, Cannulated
Catalogue number 5017, listed by Advanced Orthopaedic Solutions, Inc., United States, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
Starter Probe
Catalogue number 17455, listed by Biopro, Inc., United States, under Probe. 12 manufacturers in China are registered for this product code.
7.00 Mm Navigation Drill, Cannulated
Catalogue number 501122-0700, listed by SI-Bone, Inc., United States, under Bit, Drill. 27 manufacturers in China are registered for this product code.
Wire Cutter
Catalogue number 201.012.00, listed by Jace Medical, LLC, United States, under Cutter, Wire. 10 manufacturers in China are registered for this product code.
Slim Trunnion XR 123 Neck 4-24
Catalogue number SSI006943, listed by Zimmer, Inc., United States, under Template. 21 manufacturers in China are registered for this product code.
AOS A/R Drill Guide 5.0mm
Catalogue number 0302-100, listed by Advanced Orthopaedic Solutions, Inc., United States, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
15.25X380MM Bullet-TIP Reamer
Catalogue number SSI006019, listed by Zimmer, Inc., United States, under Reamer. 23 manufacturers in China are registered for this product code.
Versanail®troch Entry Nail (TEN) Template – Left
Catalogue number 2810-13-034, listed by Biomet Orthopedics, United States, under Template. 21 manufacturers in China are registered for this product code.
Signex
Catalogue number Y7J.35010, listed by Osteonic Co., Ltd., South Korea, under Instrument, Bending Or Contouring. 5 manufacturers in China are registered for this product code.
Anatomic Trial Sizer With Stop 16×16, H06mm
Catalogue number RO0352AD0616X16, listed by Spineup Inc, United States, under Template. 21 manufacturers in China are registered for this product code.
Rasp
Catalogue number 6191-00, listed by Interventional Spine, Inc., United States, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
Cervical Tap Primary With Stop L14
Catalogue number GN0056T114, listed by Spineup Inc, United States, under Bit, Drill. 27 manufacturers in China are registered for this product code.
Femur Impactor Head
Catalogue number 2115.00.400, listed by Total Joint Orthopedics, Inc., United States, under Impactor. 18 manufacturers in China are registered for this product code.
Horizon Subralar Gen 2 Removal Driver
Catalogue number 22654, listed by Biopro, Inc., United States, under Probe. 12 manufacturers in China are registered for this product code.
Conical Cup Pattern Ø9
Catalogue number 112-A20100, listed by Keri Medical, Switzerland, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
DVR® Crosslock Epak™depth Gauge
Catalogue number 212000003, listed by Biomet Orthopedics, United States, under Gauge, Depth. 14 manufacturers in China are registered for this product code.
Retrograde Femoral Nail Case 12mm-13mm
Catalogue number 9928, listed by Advanced Orthopaedic Solutions, Inc., United States, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
Compression Sleeve, LAG Screw Inserter 130°
Catalogue number 0465-200, listed by Advanced Orthopaedic Solutions, Inc., United States, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.