Biopsy Bracket Starter Kit
Reusable non-sterile single-angle tracking bracket with Ultra-Pro II™ Needle guides (5), (14 x 91.5cm) CIV-Flex™ covers (5), cleaning brushes (5) for use with Siemens 6C2 transducers
Who Else Makes It
Concentrated in Guangdong (14), Jiangsu (9), Shanghai (3). 6 of them are registered as contract manufacturers, able to build to a buyer’s own specification.
| Manufacturer | City | Province | Registered as | Device types |
|---|---|---|---|---|
| Jabil Circuit (Shanghai) Ltd. | Shanghai | Shanghai | Contract manufacturer | 31 |
| Raise Medical Industries, Inc. | Foshan | Guangdong | Contract manufacturer | 16 |
| ATL Technology DG,Ltd. | Dongguan | Guangdong | Contract manufacturer | 14 |
| Xuzhou Yongkang Electronic Science Technology Co., Ltd. | Xuzhou | Jiangsu | Contract manufacturer | 13 |
| Taijia Medical Electronics (Shenzhen) Co., Ltd. | Shenzhen | Guangdong | Contract manufacturer | 10 |
| Philips Ultrasound (Shanghai) Co., Ltd. | Shanghai | Shanghai | Contract manufacturer | 5 |
| Shenzhen Mindray BIO-Medical Electronics Co., Ltd. | Shenzhen | Guangdong | Specification developer | 61 |
| GE Medical Systems (China) Co., Ltd. | Wuxi | Jiangsu | Contract manufacturer | 57 |
| Edan Instruments, Inc. | Shenzhen | Guangdong | Contract manufacturer | 56 |
| Taizhou City K&W International Trade Co., Ltd. | Jiangyan | Jiangsu | Repacker / relabeller | 38 |
| Contec Medical Systems Co., Ltd. | Qinhuangdao | Hebei | Manufacturer | 22 |
| Sterigenics Shanghai E Beam Ltd. | Shanghai | Shanghai | Contract manufacturer | 14 |
Showing 12 of 37. All 37 manufacturers in China registered for System, Imaging, Pulsed Echo, Ultrasonic
Record
| Listed by | Civco Medical Instruments Co., Inc., United States |
|---|---|
| FDA product code | IYO |
| Device type | System, Imaging, Pulsed Echo, Ultrasonic |
| Device class | Class 2 |
| Regulation | 21 CFR 892.1560 |
| Establishment | Specification developer, Repacker / relabeller, Manufacturer |
| 510(k) | K092619 |
| Record published | 2017-08-22 |
| Record revised | 2023-09-18 (version 8) |
Specifications
| MRI safety | Labeling does not contain MRI Safety Information |
|---|---|
| Prescription | Prescription only |
| Supplied as a kit | Yes |
| Label carries | lot or batch number, expiry date, manufacturing date |
| Storage | Special storage condition: Keep Away from Sunlight; Storage environment temperature 52 to 85 °F |
| Sizes | Length 3.69 in; height 1.42 in |
Catalogue Numbers
| Catalogue number | Size | Status |
|---|---|---|
| 10441189 | Length 3.69 in | In distribution |
Same Product Code
| Product | Sold by | Catalogue numbers |
|---|---|---|
| Hitachi | Hitachi, Ltd. | 224 |
| eTRAX™ Needle | Civco Medical Instruments Co., Inc. | 43 |
| BladderScan® | Verathon Inc. | 38 |
| Verza Guidance System | Civco Medical Instruments Co., Inc. | 37 |
| Needle Guide | Civco Medical Instruments Co., Inc. | 34 |
| Siui | Shantou Institute OF Ultrasonic Instruments Co., Ltd. | 34 |
| Biopsy Bracket | Civco Medical Instruments Co., Inc. | 33 |
| Tracking Bracket Starter Kit | Civco Medical Instruments Co., Inc. | 29 |
| System, Imaging, Pulsed Echo, Ultrasonic | GE Healthcare Japan Corporation | 23 |
| eTRAX™ Needle System Starter Kit | Civco Medical Instruments Co., Inc. | 20 |
| Tracking Bracket | Civco Medical Instruments Co., Inc. | 19 |
| Logiq | GE Ultrasound Korea, Ltd. | 18 |
Showing 12 of 805. All products under System, Imaging, Pulsed Echo, Ultrasonic
510(K) Clearances
| Clearance | Decision date |
|---|---|
| K895614 | 1989-12-14 |
| K875236 | 1988-04-15 |
| K875240 | 1988-04-15 |
| K875128 | 1988-04-15 |
| K875241 | 1988-04-14 |
| K844472 | 1985-01-23 |
| K841332 | 1984-05-09 |
Recalls Naming This Product
17 recalls name this product by its own identifiers, the 510(k) it is cleared under.
| Recalled by | Identified by | Initiated | FDA class | Root cause | Reason | Quantity | Closed |
|---|---|---|---|---|---|---|---|
| Civco Medical Instruments Co., Inc. | 510(k) number | 2026-03-02 | Class II | Software change control | There was an error in inspection and programming of the eTRAX needle sensor for Aurora trackers. The result is a potential for the needle tip position to be incorrectly identified on the user interface. | 2 units | |
| Civco Medical Instruments Co., Inc. | 510(k) number | 2026-03-02 | Class II | Software change control | There was an error in inspection and programming of the eTRAX needle sensor for Aurora trackers. The result is a potential for the needle tip position to be incorrectly identified on the user interface. | 6 units | |
| Civco Medical Instruments Co., Inc. | 510(k) number | 2026-03-02 | Class II | Software change control | There was an error in inspection and programming of the eTRAX needle sensor for Aurora trackers. The result is a potential for the needle tip position to be incorrectly identified on the user interface. | 18 units | |
| Civco Medical Instruments Co., Inc. | 510(k) number | 2026-03-02 | Class II | Software change control | There was an error in inspection and programming of the eTRAX needle sensor for Aurora trackers. The result is a potential for the needle tip position to be incorrectly identified on the user interface. | 20 units | |
| Civco Medical Instruments Co., Inc. | 510(k) number | 2026-03-02 | Class II | Software change control | There was an error in inspection and programming of the eTRAX needle sensor for Aurora trackers. The result is a potential for the needle tip position to be incorrectly identified on the user interface. | 5 units | |
| Civco Medical Instruments Co., Inc. | 510(k) number | 2026-03-02 | Class II | Software change control | There was an error in inspection and programming of the eTRAX needle sensor for Aurora trackers. The result is a potential for the needle tip position to be incorrectly identified on the user interface. | 5 units | |
| Civco Medical Instruments Co., Inc. | 510(k) number | 2026-03-02 | Class II | Software change control | There was an error in inspection and programming of the eTRAX needle sensor for Aurora trackers. The result is a potential for the needle tip position to be incorrectly identified on the user interface. | 10 units | |
| Civco Medical Instruments Co., Inc. | 510(k) number | 2026-03-02 | Class II | Software change control | There was an error in inspection and programming of the eTRAX needle sensor for Aurora trackers. The result is a potential for the needle tip position to be incorrectly identified on the user interface. | 21 units | |
| Civco Medical Instruments Co., Inc. | 510(k) number | 2021-10-08 | Class II | Device Design | There is potential that the VirtuTRAX device will not tighten onto the instrument to be used. | 52 boxes (5 units/box) | 2024-09-30 |
| Civco Medical Instruments Co., Inc. | 510(k) number | 2021-10-08 | Class II | Device Design | There is potential that the VirtuTRAX device will not tighten onto the instrument to be used. | 9 boxes (5 units/box) | 2024-09-30 |
| Civco Medical Instruments Co., Inc. | 510(k) number | 2021-10-08 | Class II | Device Design | There is potential that the VirtuTRAX device will not tighten onto the instrument to be used. | 18 boxes (5 units/box) | 2024-09-30 |
| Civco Medical Instruments Co., Inc. | 510(k) number | 2021-10-08 | Class II | Device Design | There is potential that the VirtuTRAX device will not tighten onto the instrument to be used. | 599 boxes (5 units/box) | 2024-09-30 |
| Civco Medical Instruments Co., Inc. | 510(k) number | 2012-05-07 | Class II | Component design/selection | The general purpose electromagnetic sensor was incorrectly calibrated causing potential variability in the projected position of the needle path with the ultrasound device. | 221 kits | 2015-01-07 |
| Civco Medical Instruments Co., Inc. | 510(k) number | 2012-05-07 | Class II | Component design/selection | The general purpose electromagnetic sensor was incorrectly calibrated causing potential variability in the projected position of the needle path with the ultrasound device. | 30 kits | 2015-01-07 |
| Civco Medical Instruments Co., Inc. | 510(k) number | 2012-05-07 | Class II | Component design/selection | The general purpose electromagnetic sensor was incorrectly calibrated causing potential variability in the projected position of the needle path with the ultrasound device. | 100 kits | 2015-01-07 |
| Civco Medical Instruments Co., Inc. | 510(k) number | 2012-05-07 | Class II | Component design/selection | The general purpose electromagnetic sensor was incorrectly calibrated causing potential variability in the projected position of the needle path with the ultrasound device. | 9 kits | 2015-01-07 |
| Civco Medical Instruments Co., Inc. | 510(k) number | 2012-05-07 | Class II | Component design/selection | The general purpose electromagnetic sensor was incorrectly calibrated causing potential variability in the projected position of the needle path with the ultrasound device. | 24 kits | 2015-01-07 |
Source: U.S. FDA establishment registration and device listing records, public domain. Restructured for clarity and searchability. Not affiliated with or endorsed by the FDA. Records are records: nothing here is an offer of sale.