Siemens Tracking Bracket Kit

Reusable non-sterile tracking bracket with (14 × 91.5cm) CIV-Flex™ covers (5) and cleaning brushes (5) for use with Siemens 9L4 transducers

Registry build 21.09.26
37manufacturers in China registered for this device type
1catalogue number
7510(k) clearances naming this product code
17recalls on this code

Who Else Makes It

Concentrated in Guangdong (14), Jiangsu (9), Shanghai (3). 6 of them are registered as contract manufacturers, able to build to a buyer’s own specification.

Chinese manufacturers registered for FDA product code IYO
Manufacturer City Province Registered as Device types
Jabil Circuit (Shanghai) Ltd. Shanghai Shanghai Contract manufacturer 31
Raise Medical Industries, Inc. Foshan Guangdong Contract manufacturer 16
ATL Technology DG,Ltd. Dongguan Guangdong Contract manufacturer 14
Xuzhou Yongkang Electronic Science Technology Co., Ltd. Xuzhou Jiangsu Contract manufacturer 13
Taijia Medical Electronics (Shenzhen) Co., Ltd. Shenzhen Guangdong Contract manufacturer 10
Philips Ultrasound (Shanghai) Co., Ltd. Shanghai Shanghai Contract manufacturer 5
Shenzhen Mindray BIO-Medical Electronics Co., Ltd. Shenzhen Guangdong Specification developer 61
GE Medical Systems (China) Co., Ltd. Wuxi Jiangsu Contract manufacturer 57
Edan Instruments, Inc. Shenzhen Guangdong Contract manufacturer 56
Taizhou City K&W International Trade Co., Ltd. Jiangyan Jiangsu Repacker / relabeller 38
Contec Medical Systems Co., Ltd. Qinhuangdao Hebei Manufacturer 22
Sterigenics Shanghai E Beam Ltd. Shanghai Shanghai Contract manufacturer 14

Showing 12 of 37. All 37 manufacturers in China registered for System, Imaging, Pulsed Echo, Ultrasonic

Record

Regulatory record for Siemens Tracking Bracket Kit
Listed by Civco Medical Instruments Co., Inc., United States
FDA product code IYO
Device type System, Imaging, Pulsed Echo, Ultrasonic
Device class Class 2
Regulation 21 CFR 892.1560
Establishment Specification developer, Repacker / relabeller, Manufacturer
510(k) K092619
Record published 2017-08-22
Record revised 2022-06-10 (version 8)

Specifications

Specifications
MRI safety Labeling does not contain MRI Safety Information
Prescription Prescription only
Supplied as a kit Yes
Label carries lot or batch number, expiry date, manufacturing date
Storage Special storage condition: Keep Away from Sunlight; Storage environment temperature 52 to 85 °F
Sizes Length 3.1 in; width 1.8 in

Catalogue Numbers

Catalogue numbers for Siemens Tracking Bracket Kit
Catalogue number Size Status
11292181 Length 3.1 in In distribution

Same Product Code

Other products under the same FDA product code
Product Sold by Catalogue numbers
Hitachi Hitachi, Ltd. 224
eTRAX™ Needle Civco Medical Instruments Co., Inc. 43
BladderScan® Verathon Inc. 38
Verza Guidance System Civco Medical Instruments Co., Inc. 37
Needle Guide Civco Medical Instruments Co., Inc. 34
Siui Shantou Institute OF Ultrasonic Instruments Co., Ltd. 34
Biopsy Bracket Civco Medical Instruments Co., Inc. 33
Tracking Bracket Starter Kit Civco Medical Instruments Co., Inc. 29
System, Imaging, Pulsed Echo, Ultrasonic GE Healthcare Japan Corporation 23
eTRAX™ Needle System Starter Kit Civco Medical Instruments Co., Inc. 20
Tracking Bracket Civco Medical Instruments Co., Inc. 19
Logiq GE Ultrasound Korea, Ltd. 18

Showing 12 of 805. All products under System, Imaging, Pulsed Echo, Ultrasonic

510(K) Clearances

FDA 510(k) clearances naming this product code
Clearance Decision date
K895614 1989-12-14
K875236 1988-04-15
K875240 1988-04-15
K875128 1988-04-15
K875241 1988-04-14
K844472 1985-01-23
K841332 1984-05-09

Recalls Naming This Product

17 recalls name this product by its own identifiers, the 510(k) it is cleared under.

Recalls naming the identifiers of Siemens Tracking Bracket Kit
Recalled by Identified by Initiated FDA class Root cause Reason Quantity Closed
Civco Medical Instruments Co., Inc. 510(k) number 2026-03-02 Class II Software change control There was an error in inspection and programming of the eTRAX needle sensor for Aurora trackers. The result is a potential for the needle tip position to be incorrectly identified on the user interface. 2 units
Civco Medical Instruments Co., Inc. 510(k) number 2026-03-02 Class II Software change control There was an error in inspection and programming of the eTRAX needle sensor for Aurora trackers. The result is a potential for the needle tip position to be incorrectly identified on the user interface. 6 units
Civco Medical Instruments Co., Inc. 510(k) number 2026-03-02 Class II Software change control There was an error in inspection and programming of the eTRAX needle sensor for Aurora trackers. The result is a potential for the needle tip position to be incorrectly identified on the user interface. 18 units
Civco Medical Instruments Co., Inc. 510(k) number 2026-03-02 Class II Software change control There was an error in inspection and programming of the eTRAX needle sensor for Aurora trackers. The result is a potential for the needle tip position to be incorrectly identified on the user interface. 20 units
Civco Medical Instruments Co., Inc. 510(k) number 2026-03-02 Class II Software change control There was an error in inspection and programming of the eTRAX needle sensor for Aurora trackers. The result is a potential for the needle tip position to be incorrectly identified on the user interface. 5 units
Civco Medical Instruments Co., Inc. 510(k) number 2026-03-02 Class II Software change control There was an error in inspection and programming of the eTRAX needle sensor for Aurora trackers. The result is a potential for the needle tip position to be incorrectly identified on the user interface. 5 units
Civco Medical Instruments Co., Inc. 510(k) number 2026-03-02 Class II Software change control There was an error in inspection and programming of the eTRAX needle sensor for Aurora trackers. The result is a potential for the needle tip position to be incorrectly identified on the user interface. 10 units
Civco Medical Instruments Co., Inc. 510(k) number 2026-03-02 Class II Software change control There was an error in inspection and programming of the eTRAX needle sensor for Aurora trackers. The result is a potential for the needle tip position to be incorrectly identified on the user interface. 21 units
Civco Medical Instruments Co., Inc. 510(k) number 2021-10-08 Class II Device Design There is potential that the VirtuTRAX device will not tighten onto the instrument to be used. 52 boxes (5 units/box) 2024-09-30
Civco Medical Instruments Co., Inc. 510(k) number 2021-10-08 Class II Device Design There is potential that the VirtuTRAX device will not tighten onto the instrument to be used. 9 boxes (5 units/box) 2024-09-30
Civco Medical Instruments Co., Inc. 510(k) number 2021-10-08 Class II Device Design There is potential that the VirtuTRAX device will not tighten onto the instrument to be used. 18 boxes (5 units/box) 2024-09-30
Civco Medical Instruments Co., Inc. 510(k) number 2021-10-08 Class II Device Design There is potential that the VirtuTRAX device will not tighten onto the instrument to be used. 599 boxes (5 units/box) 2024-09-30
Civco Medical Instruments Co., Inc. 510(k) number 2012-05-07 Class II Component design/selection The general purpose electromagnetic sensor was incorrectly calibrated causing potential variability in the projected position of the needle path with the ultrasound device. 221 kits 2015-01-07
Civco Medical Instruments Co., Inc. 510(k) number 2012-05-07 Class II Component design/selection The general purpose electromagnetic sensor was incorrectly calibrated causing potential variability in the projected position of the needle path with the ultrasound device. 30 kits 2015-01-07
Civco Medical Instruments Co., Inc. 510(k) number 2012-05-07 Class II Component design/selection The general purpose electromagnetic sensor was incorrectly calibrated causing potential variability in the projected position of the needle path with the ultrasound device. 100 kits 2015-01-07
Civco Medical Instruments Co., Inc. 510(k) number 2012-05-07 Class II Component design/selection The general purpose electromagnetic sensor was incorrectly calibrated causing potential variability in the projected position of the needle path with the ultrasound device. 9 kits 2015-01-07
Civco Medical Instruments Co., Inc. 510(k) number 2012-05-07 Class II Component design/selection The general purpose electromagnetic sensor was incorrectly calibrated causing potential variability in the projected position of the needle path with the ultrasound device. 24 kits 2015-01-07

Source: U.S. FDA establishment registration and device listing records, public domain. Restructured for clarity and searchability. Not affiliated with or endorsed by the FDA. Records are records: nothing here is an offer of sale.

Where China Actually Supplies

Every device page names the company that lists it and the factories registered to make the same thing. These are the sections with the most of them.

5,100manufacturers registered in China
2,581device types they are registered for
340,248device records, each naming its maker
31provinces with a registered manufacturer