Spex Limited
Spex Assistive Technology Professional (ATP) Accessory Kit - Paediatric 14" Kit Incudes 1259-2400-100 Spex Back Support Quad Mount Hardware 1266-2501-100 Axial Biangular Lateral Bracket…
Medline
Medline’s Guardian front caster is a rolling component fitted at the front of K1 and K2 manual wheelchairs. It supports the front of the chair, while the wheel rotates around its axle and…
Everest & Jennings
Crossbrace 16W - Adjustable Depth & Cbolt-PR (Includes 4 LINKAGES,2 Saddle Bushings, 2 Craddle AND Hardware, 2 Gaskets & Hardware)
Single Post Back Support (Interface)
Single Post Back Support (Angle adjustable, fold-down back support). Optional back support interface for use on Motion Concept Power Positioning Systems. Single Post Back Pan assembly…
Remote Stop Switch
Remote Stop Switch: 1 catalogue number listed by Sunrise Medical (US) LLC, United States, under Components, Wheelchair. 54 manufacturers in China are registered for this product code.
Seat
A set of devices/components that are combined together designed to be used by a person with a disability that allows lifting and tilting movements of objects that they choose to position to…
Evermed
30 catalogue numbers from CPA29WR, listed by Xiamen Taft Medical Co., Ltd., China, under Components, Wheelchair. 54 manufacturers in China are registered for this product code.
Drivemedical
Transport/WheelchairAccessories Product Description: PanaceaBariElevating FtRst for Wire Whl
Gimbal Vent Tray (LTV)
Gimbal-style vent tray mount for LTV model ventilators (maximum 20lb. weight capacity). Wheelchair component designed for use with Motion Concepts Power Positioning Systems. Gimbal Vent…
Individual Flat Calf Pads- Set
Individual Flat Calf Pads (Set) for use with various Motion Concepts Legrests (individual or centre mount). Fabric covered foam pad. Available in a wide range of pad sizes.
Spex
Spex Adjustable Back Support 20" Wide x 23" High. Straight-shaped with unique contouring cube system & ventilated shell
Drive
Transport chairs/Wheelchairs Accessories Product Description PanaceaBari SwngAway FtRst for Wire Whl
Individual 6″ Curved Calf Pads- Set
Individual 6" Curved Calf Pads (Set) for use with various Motion Concepts independent legrests. Fabric covered foam pad. One-size. Mounting hardware included.
Modular Knee Bolster
The Modular Knee Bolster is designed for use with MC Modular Power Standing Systems. The Modular Knee Bolster is height depth and angle adjustable to provide maximum comfort/support for the…
Non-Articulating IV Pole Mount Assy (Tilt-Only)
Non-Articulating IV Pole Mount. Wheelchair component designed for use with Motion Concepts Power Positioning Systems with Tilt-Only. IV Pole mounts on the back of the wheelchair seating…
Easy-Set Mounting Hardware (Fits 1-1/8″ Back Canes)
Easy-Set Mounting Hardware (pair) for use on 1-1/8" back canes. Hardware for Matrx Elite and PB Backs. Quick-release design.
Power Recline Module (Kit)
Low Profile Power Recline Module for use on Motion Concepts Power Positioning Systems. (Recline Angle Ranges Available: Adult (168°), Mini (161°), Bariatric (150°)).
Gimbal Vent Tray (Trilogy Mount)
Gimbal-style vent tray mount for a Trilogy model ventilator (maximum 20lb. weight capacity). Wheelchair component designed for use with Motion Concepts Power Positioning Systems. Gimbal…
Planar Back Interface Plate
Planar Back Interface Plate (Flat or Recessed options available)
Freedom Back Interface (Tilt-Only)
Freedom Back Tilt-Only Interface allows for interfacing of Freedom Design Backs onto a Motion Concepts Power Positioning System with Tilt-Only. Recessed or Flush Mounting options available.
Fixed Space Saver Mounting Hardware
Fixed Space Saver Mounting Hardware (pair). (Fits 3/4", 7/8" and 1" back canes). Requires tools for removal. Permanent mount recommended for Power Wheelchair application or when portability…
MX2 Fixed Mounting Hardware
MX2 Fixed Mounting Hardware (pair) for use with the Matrx MX2 Back. (Fits 3/4", 7/8" and 1" back canes). Requires tools for removal.
Spex Seating
SuperShape back support technology on Permobil Corpus. Specify Corpus width and height required
Recline Body-Fit System, Seat Frame Assy
Seat Frame Assembly for the Recline Body-Fit System. The Recline Body-Fit System is designed to allow for installation of narrower (offset) back canes (optional 2" or 4" cane offset…
Matrx MAC Back Interface, Tilt Only, UL & Mini Maxx
Matrx MAC Back Interface Kit (includes mounting hardware to affix a Matrx MAC Back onto a Motion Concepts Power Positioning Tilt Only, UL & MINI MAXX).
Foot Rest FR
Catalogue number 10266, listed by Dynarex Corp., United States, under Components, Wheelchair. 54 manufacturers in China are registered for this product code.
Non-Articulating LTV Vent Box Assy
Non-Articulating vent tray mount for a LTV model ventilator (maximum 35lb. weight capacity). Wheelchair component designed for use with Motion Concepts Power Positioning Systems.…
Power Recline Module (30° Precline)
Optional Low Profile Power Recline Module (with 30° Precline) for use on Motion Concepts Power Positioning Systems. Precline option increases the 'forward' angle of the back support in the…
Leg Amputee Support
Leg Amputee Support. The Depth, Height and Angle adjustable amputee support is available with a bariatric (10" x 10") pad or independent i-skin calf pad. Weight Capacity = 300lb. Optional…
Kit for Nut-Modular Armrest
Catalogue number 437A40, listed by Otto Bock Mobility Solutions GmbH, Germany, under Components, Wheelchair. 54 manufacturers in China are registered for this product code.
Merits
4 catalogue numbers from L1416, listed by Merits Health Products, Inc., United States, under Components, Wheelchair. 54 manufacturers in China are registered for this product code.
Wheelchair Tire
A circular cushion of rubber and/or synthetic material which is fitted to a wheelchair wheel rim and which functions as a soft contact to the surfaces upon which the wheelchair stands and…
Multi-Swing, Manual Swing, Swing Away Systems
A set of devices/components that are combined together designed to be used by a person with a disability that allows rotating and sliding movements of objects that they choose to position…
Emerald
4 catalogue numbers from SCR2-51000, listed by Xiamen Taft Medical Co., Ltd., China, under Components, Wheelchair. 54 manufacturers in China are registered for this product code.
Matrx E2 Back Interface Kit for Permobil Tilt/Recline
Interface Kit designed to allow mounting of Matrx E2 Backs onto a Permobil Tilt/Recline wheelchair seating system.
Articulating IV Pole Mount Assy (Recline)
Articulating IV Pole Mount. Wheelchair component designed for use with Motion Concepts Power Positioning Systems with Recline. IV Pole mounts on the back of the wheelchair seating system.…
Plantar Flex LNX, Flip-Up Platform Mount
Optional Plantar Flex LNX, Flip-Up Platform Mount (Lower Assembly) installs onto the LNX Power Center Mount Legrest (Upper Assy). Available in 2 Knee-to-Heel Ranges. Foot platform sold…
Maxx Manual Pivot Plus Legrest Upper (With Calf Pad)
Maxx Manual Pivot Plus Legrest Upper Assy (with Calf Pad). Upper downtube assembly only. Left and Right configurations available. Wheelchair component designed for use with Motion Concepts…
Extended Range Mounting Hardware Upgrade
Extended Range Mounting Hardware upgrade (pair). Provides additional 2" depth adjustment for PBMH and HDMH.
Split Mounting Hardware
Split Mounting Hardware (pair). (Fits 3/4", 7/8" and 1" back canes). Optional mounting hardware for use with standard Matrx PB and Elite backs. Allows clearance of back cane rigidizer…
Power Sliding Back Module (PSB)
Optional Power Sliding Back Module with ESR (extended shear reduction) Linkages. (Assembly includes actuator and recline shroud). Installs onto a Motion Concepts Power Recline Module
Cool Cube / TouchDrive 2
The Cool Cube™ central hub input ports interface with multiple types of switches and can effectively control the various desired switch functions. The Switch-It TouchDrive2 (currently not…
Adco
4 catalogue numbers from F350W-B, listed by Xiamen Taft Medical Co., Ltd., China, under Components, Wheelchair. 54 manufacturers in China are registered for this product code.
E2 Heavy-Duty MiniSet Removable Mounting Hardware
E2 Heavy-Duty MiniSet Removable Mounting Hardware (pair); includes E2 MiniSet Mounting Pin Interface Brackets. Optional mounting hardware for Matrx E2 Backs (18H/20H). Quick-release design.
E2 MiniSet Removable Mounting Hardware
E2 MiniSet Removable Mounting Hardware (pair); includes E2 MiniSet Mounting Pin Interface Brackets. Optional mounting hardware for Matrx E2 Backs (16H or less). Quick-release design.
Power Elevating Calf Panel, Power Down FP Module
Optional Power Down Foot Platform Module (Lower Assy) designed for use wit the Power Elevating Calf Panel Assy. (Foot Platform sold separately). Assembly includes actuator motor. Optional…
LNX Power CM Legrest (Upper Assy)
Upper LNX Power Center Mount Legrest Assembly. Optional knee-to-heel (KTH) lengths available (standard, short and mini configurations). Assembly includes actuator motor. Wheelchair…
Matrx Base Drop Hooks
Matrx Base Drop Hook Hardware (2 pair). Hardware for Matrx-Vi Base Cushions and Matrx Kidabra-Vi Base Cushions. Hooks fit 7/8" or 1" tube diameters. Offset available in 0" (flush), 1" or 2"…
LNX Floating CM Legrest (Upper Assy)
Upper Floating Center Mount Legrest Assembly. Assembly includes actuator motor. Optional wheelchair component designed for use with Motion Concepts power positioning systems.
Easy-Set Mounting Hardware
Easy-Set Mounting Hardware (pair). (Fits 3/4", 7/8" and 1" back canes). Standard hardware for Matrx Elite and PB Backs. Quick-release design.
Wheelchair Back Rest
A padded support (typically vinyl covered) designed to attach to the back of a wheelchair. It typically replaces the wheelchair's sling upholstery and provides the wheelchair occupant with…
One-Piece Malleable (I-Skin) Calf Panel
One-Piece Malleable (i-skin) Calf Panel for use with Motion Concepts CM Legrests. (Bendable/shape-able integral skin foam pad). One-Size only
Mo-Vis Joysticks/Control Devices & Interfaces
An electronic device used by a wheelchair occupant or attendant to guide the wheelchair's movements and direction of travel. This device may be operated by the occupant's hand, mouth, or…
Easy-Set Mounting Hardware (Fits 1-1/4″ Back Canes)
Easy-Set Mounting Hardware (pair) for use on 1-1/4" back canes. Hardware for Matrx Elite and PB Backs. Quick-release design.
Matrx MAC Back Interface, Recline System UL Maxx & Adult Stander
Matrx MAC Back Interface Kit (includes mounting hardware to affix a Matrx MAC Back onto a Motion Concepts Power Positioning Recline System & Adult Stander).
Quad-Link Swing-Away Joystick Mount Assy.
Quad-Link Swing-Away Joystick Mount Assembly. Components/hardware used to mount the Quad-Link Swing-Away Joystick assembly onto the armrest on a Motion Concepts Power Positioning System.…
Arm Support Offset Plate
Catalogue number 436H1=7, listed by Otto Bock Mobility Solutions GmbH, Germany, under Components, Wheelchair. 54 manufacturers in China are registered for this product code.
Independent Legrest Receivers
Legrest Receivers for use with Motion Concepts Independent Legrests assemblies. Components may be ordered individually (left and right) or in sets. Offset and straight legrest receiver…
Matrx E2 Back Interface Kit for Quickie Tilt/Recline
Interface Kit designed to allow mounting of Matrx E2 Backs onto a Quickie (Sunrise Medical) Tilt/Recline wheelchair seating system.
Power Recline With ESR Module (Kit)
Low Profile Power Recline Module with Extended Shear Reduction (ESR) for use on Motion Concepts Power Positioning Systems. (Recline Angle Ranges Available: Adult (168°), Mini (161°),…
Articulating Vent Tray (LTV)
Articulating vent tray mount for a LTV model ventilator (maximum 35lb. weight capacity). Wheelchair component designed for use with Motion Concepts Power Positioning Systems. Articulating…
Matrx Elite Back Interface Mounting Kit for Amylior Wheelchairs
Cane Mounted Interface Kit designed to allow mounting of Matrx Elite or Elite Heavy-Duty Backs onto an Amylior wheelchair seating system. (installs onto Tilt canes)
Drop Seat, Seat Frame Assembly
Drop Seat, Seat frame assembly. Seat frame assemblies are configured in various widths and depth ranges. The seat frame width is adjustable in 1" increments (within designated range of…
Power Tilts
A set of devices/components that are combined together designed to be used by a person with a disability that allows lifting and tilting movements of objects that they choose to position to…
One-Piece Flat Calf Panel Assy
One-Piece Flat Calf Panel Mount Assy designed for use with Motion Concepts CM Legrests (includes mounting hardware). One-Piece Calf Pad sold separately. Available in a variety of widths and…
Matrx E2 Back Interface Kit for Quantum Tilt/Recline
Interface Kit designed to allow mounting of Matrx E2 Backs onto a Quantum (Pride Mobility) Tilt/Recline wheelchair seating system.
HD 70 Swing Away Legrest & Tube (Set)
Heavy-Duty 70° Swing Away Legrest Set. Set includes 2 upper down tube assemblies and 2 extension tube assemblies. Hardware included. Three extension tube options/sizes available: 11"-15",…
Cross Brace Assembly, Maces Back Interface
Cross Brace Assembly for the MACES Back Interface is designed for use on Motion Concepts Power Positioning Systems configured with a Recline function. The MACES interface is limited to back…
E2 Extended Range Mounting Hardware
E2 Extended Range Mounting Hardware (pair); includes E2 EasySet Mounting Pin Interface Brackets. Optional hardware for Matrx E2 Backs (18H/20H). Allows for an additional 2" of depth…
Freedom Seat Interface Plate (Seat Pan)
Freedom Seat Interface Plate allows for interfacing of Freedom Design Seating onto a Motion Concepts Power Positioning System.
Tilt-Only Straight Back Canes
Tilt-Only Straight Back Canes (pair). (available back cane lengths/heights = 14H, 16H, 18H, 20H, 22H or 24H). Wheelchair components for use on on Motion Concepts Power Positioning Systems…
E2 Split Mounting Hardware
E2 Split Mounting Hardware (pair); includes E2 EasySet Mounting Pin Interface Brackets. Optional mounting hardware for Matrx E2 Backs (18H/20H). Allows for avoidance of frame obstacles.…
Mini Tilt-Only Straight Back Canes
Tilt-Only Straight Back Canes (pair) for use on Mini Seating Systems. (available back cane lengths/heights = 14H, 16H, 18H or 20H). Wheelchair components for use on on Motion Concepts Mini…
Power Elevating/Articulating Calf Panel (Upper Assy)
Maxx Power Elevating/Articulating Calf Panel (Upper) Assembly. Optional Elevating Calf Panel (includes foam pad), may be used on its own, or in combination with the Power Down Foot…
Power Elevating Calf Panel Assy- Latitude Style
Power Elevating Calf Panel Assy with optional Latitude Foot Platform. Optional Elevating Calf Panel Assy is available with or without a foot platform. (Optional Foot Platform Foam Pad…
Fixed Power Down (Telescoping) CM Legrest (Upper Assy)
Fixed Power Down (Telescoping) Center Mount Legrest (Upper Assy). Assembly includes actuator motor. Optional wheelchair component designed for use with Motion Concepts power positioning…
DuraClip Hardware
DuraClip hardware (pair) for use with Matrx-Vi and Matrx Kidabra-Vi Base Cushions. Lock/release design used to secure the drop hook hardware to the seat fame.
MX2 Removable Mounting Hardware
MX2 Removable Mounting Hardware (pair) for use with the Matrx MX2 Back. (Fits 3/4", 7/8" and 1" back canes). Quick-release design.
Med-Adult Tilt-Only Mid-Angle (10°) Back Canes
Tilt-Only Mid-Angle Back canes (pair) designed for use on Med-Adult Systems. Mid-Angle Canes are designed with a 10° mid-angle bend. (back cane height/length options = 18H, 20H, 22H or…
Med-Adult Tilt-Only Straight Back Canes
Straight Back Canes (pair) for use on Medium-Adult Systems. (available back cane lengths/heights = 18H, 20H, 22H, 24H, 30"). Wheelchair components for use on on Motion Concepts Power…
E2 EasySet Removable Mounting Hardware (Fits 1-1/8″ Canes)
E2 EasySet Mounting Hardware (pair) designed to install onto 1-1/8" back canes (includes E2 EasySet Mounting Pin Interface Brackets). Optional mounting hardware for Matrx E2 Backs…
Center Mount Legrest Hanger Kits
Width adjustable Legrest Hanger Kits designed for use with Motion Concepts Center Mount (CM) Legrest assemblies. Available in a range of sizes: Mini (10-15W); Standard (16-22W); Bariatric,…
Spreader Assy, Matrx Backs (Tilt-Only)
Maxx Style Spreader Assy designed for use with Tilt Canes on Motion Concepts power positioning systems configured with a Tilt function. Maxx Style Tilt-Only Spreader Bar Assy are available…
Battery Charger
Catalogue number POC5060, listed by Longfian Scitech Co., Ltd., China, under Components, Wheelchair. 54 manufacturers in China are registered for this product code.
CM Legrest, Pivoting Calf Panel (Bariatric)
Optional Bariatric Pivoting Calf Panel Assembly for use with the LNX Power Center Mount Legrest (upper assy) or the Compact Power Down LNX CM Legrest. Includes mounting hardware. Padded…
Maxx Resolve Swing-Away Joystick Mount Assy
Maxx Resolve Swing-Away Joystick Mount Assembly. Components/hardware used to mount the Resolve Swing-Away Joystick assembly onto the armrest on a Motion Concepts Power Positioning System.…
CM Legrest, Individual Calf Pad Mount
Individual Calf Pad Mount Assy for use with the LNX Power Center Mount Legrest (upper assy) or MINI LNX Power CM Legrest (upper assy). Mounting hardware included. Standard LNX Calf Pad…
Eccentric Knee Bolster
The Eccentric Knee Bolster is designed for use with MC Modular Power Standing Systems. The eccentric bolster allows for independent adjustment of the left and right knee bolster pads to…
Articulating Vent Tray (Trilogy Mount)
Articulating vent tray mount for a Trilogy model ventilator (maximum 35lb. weight capacity). Wheelchair component designed for use with Motion Concepts Power Positioning Systems.…
Mini-Set Mounting Hardware
Mini-Set Mounting Hardware (pair). Standard with Matrx Mini Backs. Quick-release design.
Independent Legrest, Pivot Mount Assembly
Pivot Mount Assembly for use with Motion Concepts Independent Legrests (Pivot Plus Legrest or HD 70 Swing-Away Legrest). Left and Right configurations available. Available in 3 sizes/types…
Manual Recline Assembly With Crossbrace
The Manual Recline Back uses a manually operated gas spring to adjust the back angle. It uses a lever handle to operate the manual recline. Allows the caregiver to manually adjust the back…
The Aftermarket Group (TAG) Schwalbe Right Run Wheelchair Tire
The Aftermarket Group (TAG) Schwalbe Right Run Wheelchair Tire, 25-590, 26 x 1 Inch
Tilt-Only Angled Back Canes (5°)
Tilt-Only Angled Back canes (pair). Back Canes are designed with a 5° angle bend. (Cane height/length options= 20H, 22H, 24H). Wheelchair components for use on on Motion Concepts Power…
O2 (Gas) Holder Mount for LTV Vent Box
Optional add-on O2 Holder (Gas Cylinder) designed to attach to our LTV Vent Box Assembly (The LTV Vent Box has a maximum 20lb. weight capacity). Wheelchair component designed for use with…
Heavy Duty Clamp Complete, Black
Catalogue number 477L52=SK055, listed by Otto Bock Mobility Solutions GmbH, Germany, under Components, Wheelchair. 54 manufacturers in China are registered for this product code.
Fold-Down Back Cane Kit (Pull-Pin)
Optional Fold-Down Back Cane Kit. Pull-Pin design allows the tilt-only back canes to be folded down (forwarded) for ease of transport. (Optional wheelchair component for use with Motion…
HD 70 Swing Away Legrest Upper Assy
Heavy-Duty 70° Swing Away Legrest Upper Assy. Upper downtube assembly only. Standard and Short Knee-to-Heel options available. Universal Left and Right. Wheelchair component designed for…
Maxx Power Pivot Plus Legrest Upper (With Calf Pad)
Maxx Power Pivot Plus Legrest Upper Assy (with Calf Pad). Upper downtube assembly only (includes legrest actuator). Left and Right configurations available. Wheelchair component designed…
CTRL+5, Dual Pro, Joystick in a Can, MicroGuide, MicroPilot, and Tough JoyStick
Alternative drive controls for users who cannot use standard power wheelchair controls. Update: CTRL+5, Dual Pro and the MicroGuide will no longer use this UDI number. MicoPilot is no…
Maxx Floating CM, Flip-Up Platform Mount
Optional Maxx Floating CM, Flip-Up Platform Mount (Lower Assembly) installs onto the LNX Power Center Mount Legrest (Upper Assy). Floating Legrest Assembly is available with a Basic CM Foot…
Tilt-Only Endomorph Back Canes
Tilt-Only Endomorph Back canes (pair). Endomorph Canes are designed to allow for narrower (offset) back mounting. (optional 1", 2" or 3" cane offset available; cane height/length options =…
Matrx Back Interface Kit, Tilt-Only
Matrx Back Interface Kit includes mounting hardware to affix a Matrx Elite, PB or E2 Back onto a Motion Concepts Power Positioning System with Tilt canes. Must specify the type of Matrx…
Wheelchair Seatbelt 60″
Catalogue number 10262, listed by Dynarex Corp., United States, under Components, Wheelchair. 54 manufacturers in China are registered for this product code.
Heavy-Duty Easy-Set Mounting Hardware
Heavy-Duty Easy-Set Mounting Hardware (pair). Standard with all Heavy-Duty Matrx Elite and PB Back Models. Quick-release design. Recommended for high tone or heavy intended use.
Articulating Vent Tray (Universal)
Universal articulating vent tray mount designed for use with most industry standard ventilator models (maximum 35lb. weight capacity). Wheelchair component designed for use with Motion…
Maxx Fixed CM (FCM) Legrest (Upper Assy)
Maxx Fixed Center Mount (FCM) Legrest (Upper) Assembly. (Non-Elevating/Non-Articulating). Wheelchair component designed for use with Motion Concepts power positioning systems.
E2 Carbon Fiber Removable Hardware (Set)
E2 Carbon Fiber Removable Mounting Hardware (set); Removable mounting hardware option for Matrx E2 Carbon Fiber Backs (16H or less). Quick-release design. (Fits 3/4", 7/8" or 1" back cane…
Fixed Joystick Mount
Fixed Joystick Mount Assembly. Components/hardware used to fix-mount a wheelchair joystick to the armrest on a Motion Concepts Power Positioning System. Straight or jogged tube option…
Wheelchair Seatbelt 48″
Catalogue number 10263, listed by Dynarex Corp., United States, under Components, Wheelchair. 54 manufacturers in China are registered for this product code.
Manual Elevating CM Legrest (With Calf Pads)
Manual Elevating CM Legrest with Calf Pads with self locking ratchet mechanism. Available with Short KTH range (9.5-14.5") or Long KTH range (12-19"). Optional Foot Platform or Independent…