E2 Heavy-Duty EasySet Removable Mounting Hardware
E2 Heavy-Duty EasySet Removable Mounting Hardware (pair); includes E2 EasySet Mounting Pin Interface Brackets. Optional mounting hardware for Matrx E2 Backs (18H/20H). Quick-release design.
Maces Interface Assy, Ride Style Back (Recline)
Ride Style Back, Maces Interface Assembly allows for interfacing of Ride-Style Back Supports onto a Motion Concepts Power Positioning System with Recline. The MACES interface assembly…
Wheelchair Front Anti-Tippers
Catalogue number 10271, listed by Dynarex Corp., United States, under Components, Wheelchair. 54 manufacturers in China are registered for this product code.
One-Piece Flat Calf Panel Pad
One-Piece Flat Calf Panel Pad use with Motion Concepts CM Legrests. (HR PU foam pad with black polyester fabric cover). Available in a variety of widths and heights to accommodate different…
Alternative Controls
An electronic device used by a wheelchair occupant or attendant to guide the wheelchair's movements and direction of travel. This device may be operated by the occupant's hand, mouth, or…
Extended Mounting Pins
Extended Mounting Pins (4pcs). Hardware for Matrx Elite, E2 Backs (18H/20H) and PB Backs. Extended pins allow mounting onto back canes up to 2" wider than nominal back width (up to 20" back…
O2 Holder (Articulating)
Articulating Oxygen (O2) Tank Holder. Wheelchair component designed for use with Motion Concepts Power Positioning Systems configured with a Recline function. O2 holder mounts via…
Matrx Elite Back Interface Kit for Quantum Tilt/Recline
Interface Kit designed to allow mounting of Matrx Elite Backs onto a Quantum (Pride Mobility) Tilt/Recline wheelchair seating system.
O2 Holder (Non-Articulating)
Non-Articulating Oxygen (O2) Tank Holder. Wheelchair component designed for use with Motion Concepts Power Positioning Systems. O2 holder mounts via brackets in a fixed position on the back…
E2 Carbon Fiber Fixed Hardware
E2 Carbon Fiber Fixed Mounting Hardware (set). Fixed mounting hardware option for Matrx E2 Carbon Fiber Backs (16H or less). Requires tools to remove. (Fits 3/4", 7/8" or 1" back cane…
Assembly Required Distributors Inc.
Anti-Theft bar, adjustable, with clamps, 16' to 20'
Matrx Back Interface Kit, Recline
Matrx Back Recline Interface Kit (includes mounting hardware to affix a Matrx Elite, PB, E2 standard, E2 Mini, and Mini Back onto a Motion Concepts Power Positioning System with Recline…
Heavy-Duty MiniSet Mounting Hardware
Heavy-Duty MiniSet Mounting Hardware (pair) for Matrx Mini Backs. (Fits 3/4", 7/8" and 1" back canes). Quick-release design. Recommended for high tone or heavy use applications
Fixed Clip Hardware
Fixed Clip hardware (pair) for use with Matrx-Vi and Matrx Kidabra-Vi Base Cushions. Fixed Hardware used to secure the drop hook hardware to the seat fame.
Spreader Assy, Rehab Backs (Recline)
Recline Spreader Mounting Assembly is designed for use with Recline Canes on Motion Concepts Adult and Mini Power Positioning Systems (PPS) configured with a Recline function. The Recline…
Tilt-Only Mid-Angle Back Canes (10°)
Tilt-Only Mid-Angle Back canes (pair). Mid-Angle Canes are designed with a 10° mid-angle bend. (back cane height/length options = 18H, 20H, 22H or 24H). Wheelchair components for use on on…
Matrx Elite Back Interface Kit for Permobil Tilt/Recline
Interface Kit designed to allow mounting of Matrx Elite Backs onto a Permobil Tilt/Recline wheelchair seating system.
Knee Bolster Pads
Knee Bolster Pads are designed for use with the Modular Knee Bolster or optional Eccentric Knee Bolster on Motion Concepts Modular Power Standing Systems. Knee Bolster Pads are available in…
Matrx E2 Back Interface Mounting Kit for Amylior Wheelchairs
Cane Mounted Interface Kit designed to allow mounting of Matrx E2 Backs onto an Amylior wheelchair seating system (installs onto Tilt canes)
Maces Back Interface, Recline, Elite Backs (14-18w)
MACES Back Interface Kit includes mounting hardware to affix a Matrx Elite back (width range of 14W-18W) onto a Motion Concepts Power Positioning System with Recline. MACES hardware allows…
Med-Adult Tilt-Only Angled (5°) Back Canes
Tilt-Only Angled Back Canes (pair) for use on Medium-Adult Systems Back Canes are designed with a 5° angle bend. (Cane height/length options= 20H, 22H, 24H). Wheelchair components for use…
MX2 Fixed Heavy-Duty Mounting Hardware
MX2 Fixed Heavy-Duty Mounting Hardware (pair) for optional use with the Matrx MX2 Back. (Fits 3/4", 7/8" and 1" back canes). Requires tools for removal.
Seat Rigidizer
Lightweight plastic seat insert fits between seat rails for level support and eliminates hammock effect of seat upholstery. Securely attached to bottom of cushion inside cushion cover
Adult Mesomorph Tilt Back Canes
Optional Mesomorph Style Back Canes (pair). Canes are designed to allow mounting of Back Supports wider than nominal system width (Available in 1", 2" and 4" offset). Wheelchair components…
Switch-It Vigo Head Drive Kit
The Switch-It Vigo Head Drive Kit is a proportional head drive solution / special input device for quadriplegic power wheelchair users.
Drop Seat, Width & Depth Conversion Kits
Drop Seat, Width & Depth Conversion Kits. Optional Conversion Kits are designed to allow the seat frame width and/or depth to be increased without replacement of the original drop seat.…
Individual (I-Skin) Calf Pads- Set
Individual (moulded i-skin) Calf Pads (Set) for use with Motion Concepts CM Legrests. One-size only. Mounting hardware included.
Mini Back Hardware Extension Kit
Mini Back Hardware Extension Kit (pair). For use with MSMH. Extension kit allows offset height adjustment/installation of the Matrx Mini Back (±2.4" or ±3.6")
E2 MinSet Fixed Mounting Hardware
E2 MiniSet Fixed Mounting Hardware (pair). Optional mounting hardware for Matrx E2 Backs (16H or less). Requires tools to remove.
E2 Easy-Set Fixed Mounting Hardware
E2 Easy-Set Fixed Mounting Hardware (pair). Optional mounting hardware for Matrx E2 Backs (18H/20H). Requires tools for removal.
E2 EasySet Removable Mounting Hardware
E2 EasySet Removable Mounting Hardware (pair); includes E2 EasySet Mounting Pin Interface Brackets. Optional mounting hardware for Matrx E2 Backs (18H/20H). Quick-release design.
Munevo Drive
munevo Drive: 1 catalogue number listed by Munevo Gmbh, Germany, under Components, Wheelchair. 54 manufacturers in China are registered for this product code.
Matrx Elite Back Interface Kit for Quickie Tilt/Recline
Interface Kit designed to allow mounting of Matrx Elite Backs onto a Quickie (Sunrise Medical) Tilt/Recline wheelchair seating system.
Independent Legrest, Extension Tube Ass’y
Extension Tube Assembly for use with Motion Concepts Independent Legrests (Pivot Plus Legrest or HD 70 Swing-Away Legrest) . Available in 4 tube lengths: 9.4", 11.4", 14.4" or 17.4" .…
LNX Power Down (Telescoping) CM Legrest (Upper Assy)
Upper LNX Power Down (Telescoping) Center Mount Legrest Assembly. Assembly includes actuator motor. Optional wheelchair component designed for use with Motion Concepts power positioning…
Gimbal Vent Tray (Universal)
Universal gimbal-style vent tray mount designed use with most industry ventilator models (maximum 20lb. weight capacity). Wheelchair component designed for use with Motion Concepts Power…
MX2 Removable Heavy-Duty Mounting Hardware
MX2 Removable Heavy-Duty Mounting Hardware (pair) for optional use with the Matrx MX2 Back. (Fits 3/4", 7/8" and 1" back canes). Quick-release design.
CM Legrest, Power Flip-Up Foot Platform Mount
Optional CM Legrest, Power Flip-Up Foot Platform Mount (Lower Assembly) installs onto the LNX Power Center Mount Legrest (Upper Assy) or the Fixed CM Legrest (Upper Assy). Includes actuator…
Freedom Back Interface (Recline)
Freedom Back Recline Interface allows for interfacing of Freedom Design Backs onto a Motion Concepts Power Positioning System with Recline. Recessed or Flush Mounting options available.
Elevated Leg Rest ELR
Catalogue number 10265, listed by Dynarex Corp., United States, under Components, Wheelchair. 54 manufacturers in China are registered for this product code.