Advance
ADVANCE® CRUCIFORM Size 3-4 KEELED MODULAR STEM HA COATED
ADVANCE® CRUCIFORM Size 3-4 KEELED MODULAR STEM HA COATED
187 catalogue numbers from EIK4S22R, listed by Microport Orthopedics Inc., United States, under Prosthesis, Knee, Patellofemorotibial, Semi-Constrained, Cemented, Polymer/Metal/Polymer. 21 manufacturers in China are registered for this product code.
ROD CONNECTOR, PARALLEL SIDE LOADING/CLOSED 12mm offset,4.75/5.5mm X 4.75/5.5mm
ELEOS Limb Salvage System is a modular lower-limb reconstruction family with stems and joint-replacement components. Stem segments provide an anchoring part of assemblies used for proximal…
Fitbone Intramedullary Lengthening Nail TAA1180-T-245
ASTRA DIA. 5.5mm In-line Extension Connector Module,with DIA. 5.5/DIA. 6.0 Connector, Left, 150mm
TirboLOX-C is a cervical interbody fusion cage range made from titanium alloy using additive manufacturing. A central window accommodates bone graft, while the implant supplies structural…
Kratos Hip Stem, Lateralized High Offset Collarless, Cementless - Size 13, Ti6AI4V Alloy with HA Coating
HA PEEK, Tantalum, Ti 6Al 4V (ELI)
37W X 28L X 12.5H, 12DEG PTC Implant Sterile
Catalogue number 19669, listed by Biopro, Inc., United States, under Screw, Fixation, Bone. 31 manufacturers in China are registered for this product code.
Catalogue number 10293, listed by Biopro, Inc., United States, under Prosthesis, Knee, Patellofemorotibial, Semi-Constrained, Cemented, Polymer/Metal/Polymer. 21 manufacturers in China are registered for this product code.
PLIF IMPLANT Lordosis & Heights: 12° x 10-12mm Collapsed Width (mm): 12.32 Expanded Width (mm): 21.1 Collapsed Height (mm): 10 Expanded Height (mm): 12 Collapsed Length (mm): 39.69 Expanded…
The LARGE UNI-CLIP STAPLE is a staple so that, by widening the diamond shaped opening, mechanical deformation leads to narrowing of the interaxis of the two legs. The surgeon can obtain a…
SnugFit All-Suture Anchor Size2 USP#2/2xTape Short
Triathlon Revision Instruments Femoral Cone Augment Trial Size 1 & 2
The Integra Total Foot System is a system containing bone plates and screws designed for use in the skeletally mature foot. The plates and screws are intended to be used for stabilization…
The Integra Total Wrist Fusion pre-contoured plates with eight holes are fixed to the bone with screws.
ProMIS Fixation System is a lumbar spinal fixation family with fusion rods, polyaxial pedicle screws and set screws. The screws anchor the construct to bone, and rods connect the fixation…
Tibial Medial plate intended to buttress metaphyseal fractures of the medial tibia plateau, split-type fractures of the medial tibia plateau, medial split fractures with associated…
12 catalogue numbers from 040080034, listed by Double Medical Technology Inc., China, under Plate, Fixation, Bone. 22 manufacturers in China are registered for this product code.
22 catalogue numbers from 040090054, listed by Double Medical Technology Inc., China, under Plate, Fixation, Bone. 22 manufacturers in China are registered for this product code.
INTRA-MEDULLARY ALIGNMENT, GUIDE BUSHING, LPI BETA ARC, 6° 10mm
Scapula Reconstruction System, Anterior Hook Plate, 6mm Hook, 4 hole, Right
ARIX Wrist System bone plates are used with compatible screws for rigid fixation around the radius or ulna. Radius components are intended for forearm fractures, osteotomies and…
VANE 5.7 Poly Reduction Cannula Pedicle Screw, 7.0x25mm
Bencox Mirabo PE Liner-15° Elevated type(Type A) (GUR1050)
6.35mm x 450mm CCM Alloy Straight Rod - One Hexa type
4.5 X20MM Blunt Variable Screw
Screw, Variable, Self-Drilling
Titanium cannulated screw ø3mm L22mm with washer. Material: titanium alloy Ti6Al4V ELI (ASTM F136).
ACCURIS TIBIA ONLAY BASE TRIAL EXTRA LARGE Left Medial/Right Lateral
PRIMA TT Glenoid - Guide for Cylindrical Trephine Reamer TT Pegs SHORT / MEDIUM
Delta Trial Cups PRO - Cup Dia. 70 mm (Liner #2 EXTRA-LARGE)
Grappler Interference Screw System, Screw, Ø5.5 mm x 25 mm, Sterile
21 catalogue numbers from 803004400, listed by Zimmer, Inc., United States, under Prosthesis, Hip, Semi-Constrained, Metal/Ceramic/Polymer, Cemented Or Non-Porous, Uncemented. 15 manufacturers in China are registered for this product code.
69 catalogue numbers from 9206-300, listed by Zimmer Spine, Inc., United States, under Appliance, Fixation, Spinal Interlaminal. 11 manufacturers in China are registered for this product code.
NCB®, Periprosthetic Femur Plate, Provisional, Proximal, Left, 15/18 Hole Plates
AS B/F Provisional Adaptor 42°
Posterior Interbody Fusion Device PEEK/Ti 9x25x13 L10°
MUST-PT StSt Screw 7.3x120mm, Full Thread, Sterile
55 catalogue numbers from 00-7125-066-58, listed by Zimmer, Inc., United States, under Prosthesis, Hip, Semi-Constrained, Metal/Polymer, Porous Uncemented. 14 manufacturers in China are registered for this product code.
Bone Graft Substitute, 1-4mm Morsels Cancellous Chips, Beta-Tricalcium Phosphate
Univers Vaultlock Glenoid Trial, X-Large
#10-Right-Trial Femoral Component
3 catalogue numbers from 32-488263, listed by Biomet Orthopedics, United States, under Prosthesis, Knee, Patello/Femorotibial, Semi-Constrained, Uncemented, Porous, Coated, Polymer/Metal/Polymer. 12 manufacturers in China are registered for this product code.
Dilator Tube 4 Serrated With Retention Faces
6.5mm x 55mm MIS eX-TAB Screw, Cannulated
Catalogue number SK32, listed by Avanti Orthopaedics LLC, United States, under Screw, Fixation, Bone. 31 manufacturers in China are registered for this product code.
Rotational Knee Joint Prosthesis,with anti-luxation device, condylus replacement
10 catalogue numbers from 184-352/44, listed by Waldemar Link GmbH & Co. KG, Germany, under Prosthesis, Hip, Semi-Constrained, Metal/Ceramic/Polymer, Cemented Or Non-Porous, Uncemented. 15 manufacturers in China are registered for this product code.
Segmental Plating System is an anterior cervical plate-and-screw construct. Titanium-alloy plates with two to four holes accept 3.5 or 4.0 mm screws to stabilize the cervical spine. The…
SS REVERE In-Line Extension Clamp, 5.5mm-6.0mm, 5.5mm Rod, Right, 200mm Length
Shell/Insert Adapter; neutral; 0° inclination, 0 mm offset
Catalogue number INTV-CEMLV, listed by Teknimed SAS, France, under Cement, Bone, Vertebroplasty. 5 manufacturers in China are registered for this product code.
56 catalogue numbers from 1-01-12-7456, listed by Amplitude, France, under Prosthesis, Hip, Semi-Constrained, Metal/Polymer, Porous Uncemented. 14 manufacturers in China are registered for this product code.
Foot and Hand Motion is a family of titanium-alloy screws for fixation of fractures and osteotomies and for joint fusion in the adult foot and hand. The screws provide the implanted…
144 catalogue numbers from CAT2.8L46D, listed by Newclip Technics SAS, France, under Screw, Fixation, Bone. 31 manufacturers in China are registered for this product code.
LIF AMP, ONE Screw Plate, 16 AND Center Screw, 17.5MM
22x55x14mm LLIF Cage 7 Deg Lordotic
ORIO-3D Trabecular Ti TLIF Cage, Straight, 10mm Wide, 10 x 26mm, 12 deg.
ORIO-3D Trabecular Ti P-TLIF Cage, Trapezoidal, 9mm Wide, 16 x 24mm, 5 deg.
Expansion Driver, 1/4" QC, Impactor Lever
Humeral Component, 58mm x 54mm, OVO
PediFoot is a plate-and-screw fixation system used primarily in the foot for fractures, osteotomies and fusion. Plate sizes are selected for children and adults of small stature. The range…
106 catalogue numbers from SP-2862, listed by Biomet Microfixation, United States, under Plate, Fixation, Bone. 22 manufacturers in China are registered for this product code.
Top-Loading T-Connector for 3.2mm Rod, 21-33mm, Straight
Liner, Acetabular, Hooded, Neutral, 10-¦, HXL/FMP, 40MM ID, MP12
Catalogue number 24-1058, listed by Biomet Microfixation, United States, under Screw, Fixation, Bone. 31 manufacturers in China are registered for this product code.
57 catalogue numbers from 6251-0006-001, listed by Biomet Spine, United States, under Appliance, Fixation, Spinal Interlaminal. 11 manufacturers in China are registered for this product code.
22 catalogue numbers from 110030203, listed by Biomet Orthopedics, United States, under Plate, Fixation, Bone. 22 manufacturers in China are registered for this product code.
114 catalogue numbers from 38-2270-17-6L, listed by Rti Surgical, Inc., United States, under Spinal Vertebral Body Replacement Device. 3 manufacturers in China are registered for this product code.
CoRoent Interlock II is an interbody implant for anterior cervical fusion. The contoured PEEK spacer sits between cervical vertebral bodies, while its integrated locking mechanism and…
95 catalogue numbers from 65-L-2260-9, listed by Pioneer Surgical Technology, Inc., United States, under Intervertebral Fusion Device With Bone Graft, Lumbar. 14 manufacturers in China are registered for this product code.
Klassic HD Low Profile Acetabular Insert with E-Link Poly is the polyethylene bearing component used in a hip replacement socket. It articulates with the femoral head within the compatible…
Arena-C is a cervical interbody fusion range whose implanted spacer is made from PEEK. The spacer supports the interbody fusion site and is used with autogenous bone graft. Raised contours…
601 catalogue numbers from 702M9580, listed by Biomet Spine, United States, under Appliance, Fixation, Spinal Intervertebral Body. 14 manufacturers in China are registered for this product code.
14 catalogue numbers from 14-587904T, listed by Biomet Spine, United States, under Orthosis, Spinal Pedicle Fixation. 13 manufacturers in China are registered for this product code.
Catalogue number 110010372, listed by Biomet Orthopedics, United States, under Fastener, Fixation, Nondegradable, Soft Tissue. 7 manufacturers in China are registered for this product code.
Momentum is a posterior spinal fixation system made up of rods, screws, connectors and fasteners in different sizes. FDA describes these components as a construct for immobilizing and…
Cartridge Lordotic Expandable Implant Ti 25x9x8mm 15deg
Smooth Steinmann Pin, Single Diamond Tip; 9/64" DIA x 12" LG; Material: 316L Stainless Steel
COHERE ALIF Interbody, 12x34x24mm 25°
119 catalogue numbers from X21014220, listed by Inno-Health Technology Co., Ltd., Taiwan, under Intervertebral Fusion Device With Bone Graft, Lumbar. 14 manufacturers in China are registered for this product code.
Caddie pedicle Locking Cap Standard and Large, Complex Spine
Transverse Connector, Rail-Rod Adjustable Size (XL) MESA Rail™-Rod
DENALI®Mini Polyaxial Screw, Closed Size Ø4.0x32 mm
Catalogue number 932999015, listed by Mahe Intl., Inc., United States, under Screw, Fixation, Bone. 31 manufacturers in China are registered for this product code.
L&K Biomed DLIF PEEK Cage 22 x 50 12 14mm 1EA, LLIF PEEK Cage, 12︒,22x50x14mm
Expandable Interbody with Set Screw, Size 11x32x10-13 mm
Uniplanar Screw, Extended Tab, Transverse, Fenestrated Size Ø6.5X110 mm
TiNbN coated Anatomical Femur Component Cemented S4 - LATERAL
PULSE LUMBAR SCREW SYSTEM PRE-LORDOSED ROD 5.5 x 65mm
ANTERIOR ISOLA SPINE SYSTEM CLOSED SCREW 4.75 x 4.75 x 70mm
Stable-L Torque Limiting Tri-lobe Handle - 38 in-lb
15mm W X 12mm L, 10° LORDOTIC - 11mm H IMPLANT, STERILE
Short Retrograde Nail Sterile Diameter 12 MM Length 140 MM
TI DPL-Recon.Plate 3.5mm,str.,9 H., _x000D_128.5mm,locking plate,with combi-holes, _x000D_colour: blue
MectaLIF Anterior 3D Printed Cage 32x35x12x10°
FIX-C PEEK ACIF SA is an anterior cervical interbody device with integrated screw fixation. Its radiolucent PEEK cage contains radiopaque titanium-alloy clips that are visible on imaging. A…
EXTENDED BODY NARROW BLADE THORACIC SUPRALAMINAR REDUCTION HOOK, 10.5mm
NARROW BLADE 30° OFFSET TRANSVERSE PROCESS HOOK, RIGHT, 10.5mm
14mm/17mm 5 deg ALR Implant Module Lid
Mondrian ALIF is an anterior lumbar fusion system combining an interbody spacer with a fixation plate and bone screws. The spacer provides structural support between vertebrae, and the…
Retrieving data. Wait a few seconds and try to cut or copy again.
Every device page names the company that lists it and the factories registered to make the same thing. These are the sections with the most of them.