Natural-Knee®
980 catalogue numbers from 6307-00-220, listed by Zimmer, Inc., United States, under Prosthesis, Knee, Patellofemorotibial, Semi-Constrained, Cemented, Polymer/Metal/Polymer. 21 manufacturers in China are registered for this product code.
21manufacturers in China registered for this device type
980catalogue numbers in this listing
51510(k) clearances naming this product code
40recalls on this code
Who Else Makes It
Concentrated in Jiangsu (10), Shanghai (4), Beijing (3). 13 of them are registered as contract manufacturers, able to build to a buyer’s own specification.
| Manufacturer | City | Province | Registered as | Device types |
|---|---|---|---|---|
| MicroPort Orthopedics Global Supply Center Limited | Shanghai | Shanghai | Contract manufacturer | 82 |
| Zhejiang Biomet Medical Products Co., Ltd. | Jinhua | Zhejiang | Contract manufacturer | 74 |
| Paragon Medical Device (Changzhou) Co., Ltd. | Changzhou | Jiangsu | Contract manufacturer | 53 |
| Canwell Medical Co., Ltd. | Jinhua | Zhejiang | Contract manufacturer | 42 |
| Suzhou Elite Precision Machinery Co., Ltd. | Kunshan | Jiangsu | Contract manufacturer | 35 |
| Guangzhou Aquila Precise Tools Limited | Guangzhou | Guangdong | Contract manufacturer | 28 |
| B-ONE Medical (Suzhou) Co., Ltd. | Suzhou | Jiangsu | Contract manufacturer | 23 |
| LX Precision Shanghai Co Ltd | Shanghai | Shanghai | Contract manufacturer | 19 |
| Stryker (Suzhou) Medical Technology Co., Ltd. | Suzhou | Jiangsu | Contract manufacturer | 19 |
| Stryker Orthmed (Changzhou) Medical Instrument Co., Ltd. | Changzhou | Jiangsu | Contract manufacturer | 10 |
| b-ONE Medical (Beijing) Co., Ltd. | Beijing | Beijing | Contract manufacturer | 7 |
| Changzhou Wastonortho Medical Appliance Co., Ltd. | Changzhou | Jiangsu | Contract manufacturer | 5 |
Showing 12 of 21. All 21 manufacturers in China registered for Prosthesis, Knee, Patellofemorotibial, Semi-Constrained, Cemented, Polymer/Metal/Polymer
Record
| Listed by | Zimmer, Inc., United States |
|---|---|
| FDA product code | JWH |
| Device type | Prosthesis, Knee, Patellofemorotibial, Semi-Constrained, Cemented, Polymer/Metal/Polymer |
| Device class | Class 2 |
| Regulation | 21 CFR 888.3560 |
| Establishment | Contract manufacturer, Specification developer, Repacker / relabeller, Manufacturer, Exporter |
| 510(k) | K173057 |
| Record published | 2015-09-17 |
| Record revised | 2022-03-22 (version 7) |
Specifications
| MRI safety | Labeling does not contain MRI Safety Information |
|---|---|
| Sterilisation | Moist Heat or Steam Sterilization |
| Supplied sterile | Yes |
| Single use | Yes |
| Prescription | Prescription only |
| Label carries | lot or batch number, expiry date |
| Sizes | Height 4 to 25 mm |
| Distribution end date | 2017-04-20 |
Catalogue Numbers
| Catalogue number | Size | Status |
|---|---|---|
| 6307-00-220 | Size 2 | In distribution |
| 6307-01-210 | Size 1 | In distribution |
| 6207-08-300 | Size 0, 8 mm | In distribution |
| 6212-00-007 | Size 00 | In distribution |
| 6720-09-103 | Height 9 mm | In distribution |
| 6215-25-125 | Size 12.5 mm x 250 mm | In distribution |
| 6205-12-121 | Height 12 mm | In distribution |
| 6214-01-600 | Size 00, 0 | In distribution |
| 6225-12-125 | 12.5 mm X 125 mm | In distribution |
| 6216-00-021 | Size 2 | In distribution |
| 6720-09-200 | Height 9 mm | In distribution |
| 6215-12-165 | Size 16.5 mm x 125 mm | In distribution |
| 6205-04-122 | Height 4 mm | In distribution |
| 6207-04-301 | Size 1, 4 mm | In distribution |
| 6215-04-200 | Size 2, 4mm | In distribution |
| 6291-00-402 | 120 mm | In distribution |
| 6235-04-000 | Size 00, 4 mm | In distribution |
| 6705-02-819 | Size 3, 4, 5 | In distribution |
| 6725-19-100 | Height 19 mm | In distribution |
| 6307-00-010 | Size 1 | In distribution |
| 6307-00-030 | Size 3 | In distribution |
| 6230-04-121 | Size 2, 4 mm | In distribution |
| 6720-16-100 | Height 16 mm | In distribution |
| 6207-08-102 | Size 2, 8 mm | In distribution |
| 6207-04-310 | Size 4 mm | In distribution |
| 6307-01-350 | Size 5 | In distribution |
| 6705-02-811 | Height 11 mm | In distribution |
| 6277-04-103 | Size 3, 4 mm | In distribution |
| 6215-20-105 | Size 10.5 mm x 200 mm | In distribution |
| 6720-25-100 | Height 25 mm | In distribution |
| 6775-13-200 | Size 00/0, 13 mm | In distribution |
| 6235-08-010 | Size 0, 8 mm | In distribution |
| 6307-00-230 | Size 3 | In distribution |
| 6770-09-103 | Size 3/4/5, 9 mm | In distribution |
| 6725-16-203 | Size 3, 4, 5 | In distribution |
| 6775-19-101 | Size 1/2, 19 mm | In distribution |
| 6215-08-011 | Size 0, 8mm | In distribution |
| 6279-02-102 | Size 1 / 2 | In distribution |
| 6207-04-204 | Size 4, 4 mm | In distribution |
| 6212-00-020 | Size 2 | In distribution |
| 6207-04-202 | Size 2, 4 mm | In distribution |
| 6235-04-200 | Size 2, 4 mm | In distribution |
| 6277-12-211 | Size 1, 12 mm | In distribution |
| 6205-08-100 | Height 8 mm | In distribution |
| 6225-00-010 | Size 1 | In distribution |
| 6725-16-100 | Height 16 mm | In distribution |
| 6215-08-500 | Size 5, 8mm | In distribution |
| 6205-12-120 | Height 12 mm | In distribution |
| 6215-04-400 | Size 4, 4mm | In distribution |
| 6205-12-142 | Height 12 mm | In distribution |
| 6705-03-809 | Size 00, 0 | In distribution |
| 6775-16-203 | Size 3/4/5, 16 mm | In distribution |
| 6370-00-202 | Size 2 | In distribution |
| 6212-01-250 | Size 5 | In distribution |
| 6245-02-616 | Size 3,4,5, 16 mm | In distribution |
| 6200-07-816 | Height 16 mm | In distribution |
| 6415-08-011 | Size 1, 8 mm | In distribution |
| 6225-17-145 | 14.5 mm X 175 mm | In distribution |
| 6230-12-132 | Size 3, 12 mm | In distribution |
| 6207-04-212 | Size 2, 4 mm | In distribution |
| 6200-05-913 | Height 13 mm | In distribution |
| 6705-03-813 | Size 00, 0 | In distribution |
| 6291-01-320 | Size 2 +4 mm | In distribution |
| 6770-11-100 | Size 00/0, 11 mm | In distribution |
| 6245-02-619 | Size 3,4,5, 19 mm | In distribution |
| 6230-08-111 | Size 1, 8 mm | In distribution |
| 6307-01-200 | Size 0 | In distribution |
| 6235-04-001 | Size 00, 4 mm | In distribution |
| 6720-16-201 | Height 16 mm | In distribution |
| 6278-00-203 | Size 3 | In distribution |
| 6307-00-050 | Size 5 | In distribution |
| 6775-16-100 | Size 00/0, 16 mm | In distribution |
| 6205-08-103 | Height 8 mm | In distribution |
| 6230-12-141 | Size 4, 12 mm | In distribution |
| 6212-00-150 | Size 5 | In distribution |
| 6725-22-200 | Height 22 mm | In distribution |
| 6230-04-130 | Size 3, 4 mm | In distribution |
| 6207-08-211 | Size 1, 8 mm | In distribution |
| 6725-13-200 | Height 13 mm | In distribution |
| 6215-25-105 | Size 10.5 mm x 250 mm | In distribution |
| 6205-08-111 | Height 8 mm | In distribution |
| 6225-12-185 | 18.5 mm X 125 mm | In distribution |
| 6205-04-112 | Height 4 mm | In distribution |
| 6225-00-006 | Size 00 | In distribution |
| 6300-07-102 | Size 2, 7.0 mm, Thickness | In distribution |
| 6775-11-200 | Size 00/0, 11 mm | In distribution |
| 6207-08-303 | Size 3, 8 mm | In distribution |
| 6277-04-102 | Size 2, 4 mm | In distribution |
| 6207-12-203 | Size 3, 12 mm | In distribution |
| 6705-03-819 | Height 19 mm | In distribution |
| 6720-09-203 | Size 3, 4, 5 | In distribution |
| 6225-17-185 | 18.5 mm X 175 mm | In distribution |
| 6770-16-101 | Size 1/2, 16 mm | In distribution |
| 6207-12-104 | Size 4, 12 mm | In distribution |
| 6307-00-040 | Size 4 | In distribution |
| 6226-02-001 | Size 1 10 mm | In distribution |
| 6415-08-013 | Size 3, 8 mm | In distribution |
| 6212-01-120 | Size 2 | In distribution |
| 6230-04-120 | Size 2, 4 mm | In distribution |
| 6725-09-101 | Size 1, 2 | In distribution |
| 6420-00-285 | In distribution | |
| 6705-02-919 | Size 3, 4, 5 | In distribution |
| 6307-00-051 | Size 5 | In distribution |
| 6205-04-121 | Height 4 mm | In distribution |
| 6205-12-143 | Height 12 mm | In distribution |
| 6291-01-308 | Size 0 +4 mm | In distribution |
| 6207-04-302 | Size 2, 4 mm | In distribution |
| 6307-01-240 | Size 4 | In distribution |
| 6277-12-112 | Size 2, 12 mm | In distribution |
| 6290-00-047 | In distribution | |
| 6216-00-010 | Size 1 | In distribution |
| 6277-04-300 | Size 0,4 mm | In distribution |
| 6212-01-001 | Size 00 | In distribution |
| 6205-12-007 | Size 00 | In distribution |
| 6205-04-001 | Height 4 mm | In distribution |
| 6277-12-201 | Size 1, 12 mm | In distribution |
| 6212-01-230 | Size 3 | In distribution |
| 6207-08-112 | Size 2, 8 mm | In distribution |
| 6775-09-103 | Size 3/4/5, 9 mm | In distribution |
| 6277-08-303 | Size 3,8 mm | In distribution |
| 6212-00-120 | Size 2 | In distribution |
| 6320-00-200 | Size 0 | In distribution |
| 6242-01-022 | Size 1, 2, 22 mm | In distribution |
| 6205-04-123 | Height 4 mm | In distribution |
| 6277-12-111 | Size 1, 12 mm | In distribution |
| 6291-00-353 | Size 2/3 +14 mm | In distribution |
| 6307-01-220 | Size 2 | In distribution |
| 6205-12-006 | Size 00 | In distribution |
| 6720-25-101 | Size 1, 2 | In distribution |
| 6415-08-210 | Size 0, 8 mm | In distribution |
| 6221-00-012 | Size 5 | In distribution |
| 6720-22-100 | Height 22 mm | In distribution |
| 6245-02-711 | Size 3,4,5, 11 mm | In distribution |
| 6212-00-230 | Size 3 | In distribution |
| 6230-08-003 | Size 00, 8 mm | In distribution |
| 6230-12-102 | Size 0, 12 mm | In distribution |
| 6200-07-809 | Height 9 mm | In distribution |
| 6291-01-310 | Size 1 +4 mm | In distribution |
| 6277-04-214 | Size 4, 4 mm | In distribution |
| 6242-02-016 | Size 3, 4, 5, 16 mm | In distribution |
| 6215-20-125 | Size 12.5 mm x 200 mm | In distribution |
| 6221-00-009 | Size 2 | In distribution |
| 6307-00-330 | Size 3 | In distribution |
| 6200-05-816 | Height 16 mm | In distribution |
| 6277-12-204 | Size 4, 12 mm | In distribution |
| 6205-12-030 | Size 3 | In distribution |
| 6245-00-616 | Size 00, 0, 16 mm | In distribution |
| 6215-04-301 | Size 3, 4mm | In distribution |
| 6775-19-200 | Size 00/0, 19 mm | In distribution |
| 6212-00-040 | Size 4 | In distribution |
| 6291-00-403 | 155 mm | In distribution |
| 6278-00-211 | Size 1 | In distribution |
| 6720-13-201 | Size 1, 2 | In distribution |
| 6705-01-916 | Size 1, 2 | In distribution |
| 6221-00-007 | Size 0 | In distribution |
| 6725-22-203 | Size 3, 4, 5 | In distribution |
| 6245-02-713 | Size 3,4,5, 13 mm | In distribution |
| 6705-03-816 | Size 00, 0 | In distribution |
| 6725-25-103 | Height 25.00 mm | In distribution |
| 6205-08-001 | Height 8 mm | In distribution |
| 6420-00-003 | Size 00 | In distribution |
| 6205-12-101 | Height 12 mm | In distribution |
| 6215-08-400 | Size 4, 8mm | In distribution |
| 6307-01-250 | Size 5 | In distribution |
| 6235-08-401 | Size 4, 8 mm | In distribution |
| 6307-00-250 | Size 5 | In distribution |
| 6207-04-111 | Size 1, 4 mm | In distribution |
| 6212-00-001 | Size 00 | In distribution |
| 6235-08-400 | Size 4, 8 mm | In distribution |
| 6216-00-008 | Size 0 | In distribution |
| 6204-01-410 | Height 4 mm | In distribution |
| 6720-11-100 | Height 11 mm | In distribution |
| 6225-17-205 | 20.5 mm X 175 mm | In distribution |
| 6225-00-009 | Size 0 | In distribution |
| 6291-00-404 | 180 mm | In distribution |
| 6207-12-200 | Size 0, 12 mm | In distribution |
| 6215-00-215 | Size 215 mm | In distribution |
| 6370-00-103 | Size 3 | In distribution |
| 6216-00-041 | Size 4 | In distribution |
| 6775-13-103 | Size 3/4/5, 13 mm | In distribution |
| 6415-04-012 | Size 2, 4 mm | In distribution |
| 6291-00-350 | Size 00/0 +14 mm | In distribution |
| 6215-00-090 | Size 90 mm | In distribution |
| 6307-00-200 | Size 0 | In distribution |
| 6770-13-101 | Size 1/2, 13 mm | In distribution |
| 6279-03-300 | Size 3 | In distribution |
| 6205-08-112 | Height 8 mm | In distribution |
| 6720-25-103 | Size 3, 4, 5 | In distribution |
| 6205-04-141 | Height 4 mm | In distribution |
| 6307-00-009 | Size 0 | In distribution |
| 6720-09-101 | Height 9 mm | In distribution |
| 6207-08-301 | Size 1, 8 mm | In distribution |
| 6277-04-302 | Size 2,4 mm | In distribution |
| 6205-04-103 | Height 4 mm | In distribution |
| 6720-19-201 | Size 1, 2 | In distribution |
| 6775-25-101 | Size 1/2, 25 mm | In distribution |
| 6200-05-811 | Size A | In distribution |
| 6212-00-051 | Size 5 | In distribution |
| 6221-00-650 | Size 00,0 | In distribution |
| 6279-00-100 | In distribution | |
| 6212-00-050 | Size 5 | In distribution |
| 6205-04-111 | Height 4 mm | In distribution |
| 6207-08-304 | Size 4, 8 mm | In distribution |
| 6207-04-114 | Size 4, 4 mm | In distribution |
| 6230-04-133 | Size 3, 4 mm | In distribution |
| 6215-04-401 | Size 4, 4mm | In distribution |
| 6205-04-200 | Size 4 mm | In distribution |
| 6278-00-213 | Size 3 | In distribution |
| 6207-12-112 | Size 2, 12 mm | In distribution |
| 6320-00-204 | Size 4 | In distribution |
| 6207-04-103 | Size 3, 4 mm | In distribution |
| 6277-12-104 | Size 4, 12 mm | In distribution |
| 6216-00-006 | Size 00 | In distribution |
| 6720-25-201 | Height 25 mm | In distribution |
| 6235-04-301 | Size 3, 4 mm | In distribution |
| 6278-00-113 | Size 3 | In distribution |
| 6277-12-200 | Size 0, 12 mm | In distribution |
| 6277-04-210 | Size 0, 4 mm | In distribution |
| 6245-00-613 | Size 00, 0, 13 mm | In distribution |
| 6212-00-210 | Size 1 | In distribution |
| 6277-12-103 | Size 3, 12 mm | In distribution |
| 6277-04-304 | Size 4,4 mm | In distribution |
| 6230-12-111 | Size 1, 12 mm | In distribution |
| 6214-01-630 | Size 2, 3 | In distribution |
| 6775-09-203 | Size 3/4/5, 9 mm | In distribution |
| 6705-03-922 | Size 00, 0 | In distribution |
| 6770-09-201 | Size 1/2, 9 mm | In distribution |
| 6307-01-320 | Size 2 | In distribution |
| 6212-00-010 | Size 1 | In distribution |
| 6242-00-011 | Size 00, 0, 11 mm | In distribution |
| 6770-22-100 | Size 00/0, 22 mm | In distribution |
| 6215-08-201 | Size 2, 8mm | In distribution |
| 6770-13-201 | Size 1/2, 13 mm | In distribution |
| 6200-06-919 | Height 19 mm | In distribution |
| 6277-04-114 | Size 4, 4 mm | In distribution |
| 6230-08-131 | Size 3, 8 mm | In distribution |
| 6370-00-102 | Size 2 | In distribution |
| 6207-04-210 | Size 0, 4 mm | In distribution |
| 6277-08-211 | Size 1, 8 mm | In distribution |
| 6725-16-101 | Height 16 mm | In distribution |
| 6415-08-000 | Size 00, 8 mm | In distribution |
| 6291-01-330 | Size 3 +4 mm | In distribution |
| 6207-12-100 | Size 0, 12 mm | In distribution |
| 6775-09-100 | Size 00/0, 9 mm | In distribution |
| 6277-08-204 | Size 4, 8 mm | In distribution |
| 6770-19-101 | Size 1/2, 19 mm | In distribution |
| 6207-04-214 | Size 4, 4 mm | In distribution |
| 6770-25-103 | Size 3/4/5, 25 mm | In distribution |
| 6208-00-113 | Size 3 | In distribution |
| 6215-08-100 | Size 1, 8mm | In distribution |
Showing 250 of 300 catalogue numbers.
Same Product Code
| Product | Sold by | Catalogue numbers |
|---|---|---|
| Prophecy® | Microport Orthopedics Inc. | 4,423 |
| Exult Knee Replacement System | Corentec Co., Ltd. | 1,770 |
| Freedom | Maxx Orthopedics Inc. | 1,693 |
| Legion | Smith & Nephew, Inc. | 1,534 |
| MyKnee | Medacta International SA | 1,466 |
| Journey | Smith & Nephew, Inc. | 1,339 |
| Persona® | Zimmer, Inc. | 1,254 |
| DJO Surgical | Encore Medical, L.P. | 1,131 |
| U2 Total Knee System | United Orthopedic Corp. | 1,078 |
| CKS Plus | Shalby Advanced Technologies, Inc. | 1,024 |
| Lospa Modular Knee System | Corentec Co., Ltd. | 1,020 |
| Truliant® | Exactech, Inc. | 934 |
Showing 12 of 1,175. All products under Prosthesis, Knee, Patellofemorotibial, Semi-Constrained, Cemented, Polymer/Metal/Polymer
510(K) Clearances
| Clearance | Decision date |
|---|---|
| K243724 | 2025-03-06 |
| K230321 | 2023-03-08 |
| K221479 | 2022-11-17 |
| K210829 | 2021-05-18 |
| K210551 | 2021-03-18 |
| K200209 | 2020-03-24 |
| K193223 | 2020-01-24 |
| K191625 | 2019-09-05 |
| K190068 | 2019-06-04 |
| K183583 | 2019-05-10 |
| K181947 | 2018-10-25 |
| K173057 | 2018-03-29 |
| K152494 | 2015-11-25 |
| K142787 | 2014-12-22 |
| K133737 | 2014-02-04 |
| K130143 | 2013-02-22 |
| K122765 | 2012-11-09 |
| K113369 | 2012-03-27 |
| K073286 | 2008-03-07 |
| K072281 | 2007-09-06 |
| K062768 | 2006-10-13 |
| K061882 | 2006-08-01 |
| K060722 | 2006-05-26 |
| K060370 | 2006-04-28 |
| K052879 | 2005-11-22 |
| K050723 | 2005-04-20 |
| K043101 | 2005-03-07 |
| K042271 | 2004-10-13 |
| K023211 | 2002-10-17 |
| K013991 | 2001-12-27 |
| K003910 | 2001-03-19 |
| K991581 | 1999-07-30 |
| K972774 | 1999-05-05 |
| K972270 | 1997-11-24 |
| K963148 | 1997-02-13 |
| K962196 | 1996-08-23 |
| K960279 | 1996-04-26 |
| K951185 | 1996-03-15 |
| K946150 | 1995-07-11 |
| K933785 | 1995-01-30 |
| K930831 | 1993-11-16 |
| K911572 | 1991-07-01 |
| K895639 | 1990-02-08 |
| K892800 | 1989-08-03 |
| K872379 | 1987-10-28 |
| K863805 | 1986-12-02 |
| K853661 | 1985-12-09 |
| K834432 | 1984-04-11 |
| K833363 | 1984-02-13 |
| K830121 | 1983-04-26 |
| K790219 | 1979-05-08 |
Recalls Naming This Product
48 recalls name this product by its own identifiers, the 510(k) it is cleared under.
| Recalled by | Identified by | Initiated | FDA class | Root cause | Reason | Quantity | Closed |
|---|---|---|---|---|---|---|---|
| Zimmer, Inc. | 510(k) number | 2024-03-28 | Class II | Process change control | Out of specification violation of devices that results in a gap existing within the fixture that presses the fiber metal pad to the substrate, causing the pad to not fully bond to the substrate. | 5,546 units | |
| Zimmer, Inc. | 510(k) number | 2023-05-19 | Class II | Under Investigation by firm | Device outer packaging was incorrectly labeled. | 2026-05-29 | |
| Zimmer, Inc. | 510(k) number | 2019-10-10 | Class II | Packaging change control | Non-highly polished implants may adhere to the LDPE bag (previous packaging configuration). | 5,459,583 total devices | 2020-05-19 |
| Zimmer, Inc. | 510(k) number | 2017-11-29 | Class II | Packaging | The LDPE bag packaging for various highly polished hip and knee implants may adhere to the highly polished surface, leaving residue or material from the LDPE bag on the implant after it is removed from the bag. | 13,227 in total | 2020-04-02 |
| Zimmer, Inc. | 510(k) number | 2017-11-29 | Class II | Packaging | The LDPE bag packaging for various highly polished hip and knee implants may adhere to the highly polished surface, leaving residue or material from the LDPE bag on the implant after it is removed from the bag. | 13,227 in total | 2020-04-02 |
| Zimmer, Inc. | 510(k) number | 2017-11-29 | Class II | Packaging | The LDPE bag packaging for various highly polished hip and knee implants may adhere to the highly polished surface, leaving residue or material from the LDPE bag on the implant after it is removed from the bag. | 2020-04-02 | |
| Zimmer, Inc. | 510(k) number | 2017-11-29 | Class II | Packaging | The LDPE bag packaging for various highly polished hip and knee implants may adhere to the highly polished surface, leaving residue or material from the LDPE bag on the implant after it is removed from the bag. | 13,227 in total | 2020-04-02 |
| Zimmer, Inc. | 510(k) number | 2017-11-29 | Class II | Packaging | The LDPE bag packaging for various highly polished hip and knee implants may adhere to the highly polished surface, leaving residue or material from the LDPE bag on the implant after it is removed from the bag. | 13,227 in total | 2020-04-02 |
| Zimmer, Inc. | 510(k) number | 2016-01-11 | Class II | Process control | LDPE bag containing the implant adheres to the highly polished implant surface. | 13483 | 2017-05-23 |
| Zimmer, Inc. | 510(k) number | 2014-10-02 | Class II | Package design/selection | Failed to meet established requirements for sterile barrier integrity due to a breach of the inner cavity. If the outer tray is compromised in addition to the inner tray a periprosthetic infection may occur. The risk associated with a peri | 352 | 2015-07-01 |
| Zimmer, Inc. | 510(k) number | 2014-02-25 | Class II | Storage | A complaint was received for a discolored All Poly Tibia. Root cause analysis found that the discoloration was the result of free radical oxidation. The oxidation process was advanced prematurely as a result of the machined component being | 3638 units | 2015-03-24 |
| Zimmer, Inc. | 510(k) number | 2014-02-25 | Class II | Storage | A complaint was received for a discolored All Poly Tibia. Root cause analysis found that the discoloration was the result of free radical oxidation. The oxidation process was advanced prematurely as a result of the machined component being | 3638 units | 2015-03-24 |
| Zimmer, Inc. | 510(k) number | 2014-02-25 | Class II | Storage | A complaint was received for a discolored All Poly Tibia. Root cause analysis found that the discoloration was the result of free radical oxidation. The oxidation process was advanced prematurely as a result of the machined component being | 3638 units | 2015-03-24 |
| Zimmer, Inc. | 510(k) number | 2014-02-25 | Class II | Storage | A complaint was received for a discolored All Poly Tibia. Root cause analysis found that the discoloration was the result of free radical oxidation. The oxidation process was advanced prematurely as a result of the machined component being | 3638 units | 2015-03-24 |
| Zimmer, Inc. | 510(k) number | 2014-02-25 | Class II | Storage | A complaint was received for a discolored All Poly Tibia. Root cause analysis found that the discoloration was the result of free radical oxidation. The oxidation process was advanced prematurely as a result of the machined component being | 3638 units | 2015-03-24 |
| Zimmer, Inc. | 510(k) number | 2014-02-25 | Class II | Storage | A complaint was received for a discolored All Poly Tibia. Root cause analysis found that the discoloration was the result of free radical oxidation. The oxidation process was advanced prematurely as a result of the machined component being | 3638 units | 2015-03-24 |
| Zimmer, Inc. | 510(k) number | 2013-08-30 | Class II | Package design/selection | The low density polyethylene (LDPE) bag used to package implants adheres to the highly polished surface of the devices. | 33987 | 2014-09-25 |
| Zimmer, Inc. | 510(k) number | 2013-08-30 | Class II | Package design/selection | The low density polyethylene (LDPE) bag used to package implants adheres to the highly polished surface of the devices. | 13483 | 2014-09-25 |
| Zimmer, Inc. | 510(k) number | 2012-04-30 | Class II | Component design/selection | The design of the spring clip for the jaw assembly was updated in March 2011 due to fractures of the spring clip. Zimmer has received complaints for the spring clip fracturing on the updated design. The spring clip may fracture or fall off | 1662 units | 2014-06-04 |
| Zimmer, Inc. | 510(k) number | 2012-04-30 | Class II | Component design/selection | The design of the spring clip for the jaw assembly was updated in March 2011 due to fractures of the spring clip. Zimmer has received complaints for the spring clip fracturing on the updated design. The spring clip may fracture or fall off | 65 units | 2014-06-04 |
| Zimmer, Inc. | 510(k) number | 2011-12-21 | Not classified | Component design/selection | The firm has 16 reports of patella peg shear out of 109,386 distributed units (0.0137%). The failures have been reported where the pegs on the back side of the patella have sheared at the peg/patella interface. Analysis shows that the highl | TBD | 2015-08-21 |
| Zimmer, Inc. | 510(k) number | 2011-12-21 | Not classified | Component design/selection | The firm has 16 reports of patella peg shear out of 109,386 distributed units (0.0137%). The failures have been reported where the pegs on the back side of the patella have sheared at the peg/patella interface. Analysis shows that the highl | 2015-08-21 | |
| Zimmer, Inc. | 510(k) number | 2011-12-21 | Not classified | Component design/selection | The firm has 16 reports of patella peg shear out of 109,386 distributed units (0.0137%). The failures have been reported where the pegs on the back side of the patella have sheared at the peg/patella interface. Analysis shows that the highl | 2015-08-21 | |
| Zimmer, Inc. | 510(k) number | 2011-12-21 | Not classified | Component design/selection | The firm has 16 reports of patella peg shear out of 109,386 distributed units (0.0137%). The failures have been reported where the pegs on the back side of the patella have sheared at the peg/patella interface. Analysis shows that the highl | 2015-08-21 | |
| Zimmer, Inc. | 510(k) number | 2011-12-21 | Not classified | Component design/selection | The firm has 16 reports of patella peg shear out of 109,386 distributed units (0.0137%). The failures have been reported where the pegs on the back side of the patella have sheared at the peg/patella interface. Analysis shows that the highl | 2015-08-21 | |
| Zimmer, Inc. | 510(k) number | 2011-12-21 | Not classified | Component design/selection | The firm has 16 reports of patella peg shear out of 109,386 distributed units (0.0137%). The failures have been reported where the pegs on the back side of the patella have sheared at the peg/patella interface. Analysis shows that the highl | 2015-08-21 | |
| Zimmer, Inc. | 510(k) number | 2011-12-21 | Not classified | Component design/selection | The firm has 16 reports of patella peg shear out of 109,386 distributed units (0.0137%). The failures have been reported where the pegs on the back side of the patella have sheared at the peg/patella interface. Analysis shows that the highl | 2015-08-21 | |
| Zimmer, Inc. | 510(k) number | 2011-12-21 | Not classified | Component design/selection | The firm has 16 reports of patella peg shear out of 109,386 distributed units (0.0137%). The failures have been reported where the pegs on the back side of the patella have sheared at the peg/patella interface. Analysis shows that the highl | 2015-08-21 | |
| Zimmer, Inc. | 510(k) number | 2011-03-14 | Not classified | Device Design | The firm is initiating a recall due to the potential for breakdown of the AlTiN PVD (black) coating during surgery and the coating could fall into the surgical site. The firm has received 22 reports of the black coating coming off the inst | 802 | 2013-03-19 |
| Zimmer, Inc. | 510(k) number | 2011-03-14 | Not classified | Device Design | The firm is initiating a recall due to the potential for breakdown of the AlTiN PVD (black) coating during surgery and the coating could fall into the surgical site. The firm has received 22 reports of the black coating coming off the inst | 320 | 2013-03-19 |
| Zimmer, Inc. | 510(k) number | 2011-03-14 | Not classified | Device Design | The firm is initiating a recall due to the potential for breakdown of the AlTiN PVD (black) coating during surgery and the coating could fall into the surgical site. The firm has received 22 reports of the black coating coming off the inst | 207 | 2013-03-19 |
| Zimmer, Inc. | 510(k) number | 2011-03-14 | Not classified | Device Design | The firm is initiating a recall due to the potential for breakdown of the AlTiN PVD (black) coating during surgery and the coating could fall into the surgical site. The firm has received 22 reports of the black coating coming off the inst | 649 | 2013-03-19 |
| Zimmer, Inc. | 510(k) number | 2011-03-14 | Not classified | Device Design | The firm is initiating a recall due to the potential for breakdown of the AlTiN PVD (black) coating during surgery and the coating could fall into the surgical site. The firm has received 22 reports of the black coating coming off the inst | 757 | 2013-03-19 |
| Zimmer, Inc. | 510(k) number | 2011-03-14 | Not classified | Device Design | The firm is initiating a recall due to the potential for breakdown of the AlTiN PVD (black) coating during surgery and the coating could fall into the surgical site. The firm has received 22 reports of the black coating coming off the inst | 552 | 2013-03-19 |
| Zimmer, Inc. | 510(k) number | 2011-03-14 | Not classified | Device Design | The firm is initiating a recall due to the potential for breakdown of the AlTiN PVD (black) coating during surgery and the coating could fall into the surgical site. The firm has received 22 reports of the black coating coming off the inst | 436+414(in addendum)=850 | 2013-03-19 |
| Zimmer, Inc. | 510(k) number | 2011-03-14 | Not classified | Device Design | The firm is initiating a recall due to the potential for breakdown of the AlTiN PVD (black) coating during surgery and the coating could fall into the surgical site. The firm has received 22 reports of the black coating coming off the inst | 199+416(in addendum)=615 | 2013-03-19 |
| Zimmer, Inc. | 510(k) number | 2011-03-14 | Not classified | Device Design | The firm is initiating a recall due to the potential for breakdown of the AlTiN PVD (black) coating during surgery and the coating could fall into the surgical site. The firm has received 22 reports of the black coating coming off the inst | 323+409 (in addendum)=732 | 2013-03-19 |
| Zimmer, Inc. | 510(k) number | 2011-03-14 | Not classified | Device Design | The firm is initiating a recall due to the potential for breakdown of the AlTiN PVD (black) coating during surgery and the coating could fall into the surgical site. The firm has received 22 reports of the black coating coming off the inst | 578 | 2013-03-19 |
| Zimmer, Inc. | 510(k) number | 2011-03-14 | Not classified | Device Design | The firm is initiating a recall due to the potential for breakdown of the AlTiN PVD (black) coating during surgery and the coating could fall into the surgical site. The firm has received 22 reports of the black coating coming off the inst | 556 | 2013-03-19 |
| Zimmer, Inc. | 510(k) number | 2011-03-14 | Not classified | Device Design | The firm is initiating a recall due to the potential for breakdown of the AlTiN PVD (black) coating during surgery and the coating could fall into the surgical site. The firm has received 22 reports of the black coating coming off the inst | 548 | 2013-03-19 |
Showing 40 of 48.
Recalls
35 of these are Class II. Class II means a temporary or reversible health consequence. Volume alone is not a quality signal: a manufacturer that ships more recalls more.
| Initiated | FDA class | Root cause | Reason | Quantity | Closed |
|---|---|---|---|---|---|
| 2025-02-27 | Class II | Labeling Change Control | The “Use with plate 7, 8, 9, 10” compatibility statement on top of the label does not match with the compatibility statements “USE WITH PLATE 5, 6” in the translations section of the same label. | 76 units | |
| 2025-01-06 | Class II | Process change control | It was identified internally that two commingle events occurred where the metal support post within the polyethylene articular surface was assembled incorrectly for three units within the scope. | 155 units | |
| 2025-01-06 | Class II | Process change control | It was identified internally that two commingle events occurred where the metal support post within the polyethylene articular surface was assembled incorrectly for three units within the scope. | 155 units | |
| 2022-12-06 | Class II | Under Investigation by firm | Zimmer Biomet is conducting a voluntary medical device recall related to the NexGen Stemmed Option Tibial Components due to the clinically and statistically significant higher overall revision rates when these tibial components are used wit | 1366 | |
| 2022-12-06 | Class II | Under Investigation by firm | Zimmer Biomet is conducting a voluntary medical device recall related to the NexGen Stemmed Option Tibial Components due to the clinically and statistically significant higher overall revision rates when these tibial components are used wit | 1049 | |
| 2022-12-06 | Class II | Under Investigation by firm | Zimmer Biomet is conducting a voluntary medical device recall related to the NexGen Stemmed Option Tibial Components due to the clinically and statistically significant higher overall revision rates when these tibial components are used wit | 1673 | |
| 2022-12-06 | Class II | Under Investigation by firm | Zimmer Biomet is conducting a voluntary medical device recall related to the NexGen Stemmed Option Tibial Components due to the clinically and statistically significant higher overall revision rates when these tibial components are used wit | 2092 | |
| 2022-12-06 | Class II | Under Investigation by firm | Zimmer Biomet is conducting a voluntary medical device recall related to the NexGen Stemmed Option Tibial Components due to the clinically and statistically significant higher overall revision rates when these tibial components are used wit | 284 | |
| 2022-12-06 | Class II | Under Investigation by firm | Zimmer Biomet is conducting a voluntary medical device recall related to the NexGen Stemmed Option Tibial Components due to the clinically and statistically significant higher overall revision rates when these tibial components are used wit | 2460 | |
| 2019-10-10 | Class II | Packaging change control | Non-highly polished implants may adhere to the LDPE bag (previous packaging configuration). | 5,459,583 total devices | 2020-05-19 |
| 2018-10-31 | Class II | Process control | Screw is missing from the package | 19 units | 2019-04-08 |
| 2017-11-29 | Class II | Packaging | The LDPE bag packaging for various highly polished hip and knee implants may adhere to the highly polished surface, leaving residue or material from the LDPE bag on the implant after it is removed from the bag. | 13,227 in total | 2020-04-02 |
| 2017-11-29 | Class II | Packaging | The LDPE bag packaging for various highly polished hip and knee implants may adhere to the highly polished surface, leaving residue or material from the LDPE bag on the implant after it is removed from the bag. | 13,227 in total | 2020-04-02 |
| 2017-11-29 | Class II | Packaging | The LDPE bag packaging for various highly polished hip and knee implants may adhere to the highly polished surface, leaving residue or material from the LDPE bag on the implant after it is removed from the bag. | 13,227 in total | 2020-04-02 |
| 2017-11-29 | Class II | Packaging | The LDPE bag packaging for various highly polished hip and knee implants may adhere to the highly polished surface, leaving residue or material from the LDPE bag on the implant after it is removed from the bag. | 13,227 in total | 2020-04-02 |
| 2017-11-29 | Class II | Packaging | The LDPE bag packaging for various highly polished hip and knee implants may adhere to the highly polished surface, leaving residue or material from the LDPE bag on the implant after it is removed from the bag. | 13,227 in total | 2020-04-02 |
| 2017-11-29 | Class II | Packaging | The LDPE bag packaging for various highly polished hip and knee implants may adhere to the highly polished surface, leaving residue or material from the LDPE bag on the implant after it is removed from the bag. | 13,227 in total | 2020-04-02 |
| 2017-11-29 | Class II | Packaging | The LDPE bag packaging for various highly polished hip and knee implants may adhere to the highly polished surface, leaving residue or material from the LDPE bag on the implant after it is removed from the bag. | 13,227 in total | 2020-04-02 |
| 2017-11-29 | Class II | Packaging | The LDPE bag packaging for various highly polished hip and knee implants may adhere to the highly polished surface, leaving residue or material from the LDPE bag on the implant after it is removed from the bag. | 13,227 in total | 2020-04-02 |
| 2017-11-29 | Class II | Packaging | The LDPE bag packaging for various highly polished hip and knee implants may adhere to the highly polished surface, leaving residue or material from the LDPE bag on the implant after it is removed from the bag. | 13,227 in total | 2020-04-02 |
| 2017-11-29 | Class II | Packaging | The LDPE bag packaging for various highly polished hip and knee implants may adhere to the highly polished surface, leaving residue or material from the LDPE bag on the implant after it is removed from the bag. | 13,227 in total | 2020-04-02 |
| 2017-11-29 | Class II | Packaging | The LDPE bag packaging for various highly polished hip and knee implants may adhere to the highly polished surface, leaving residue or material from the LDPE bag on the implant after it is removed from the bag. | 13,227 in total | 2020-04-02 |
| 2017-11-29 | Class II | Packaging | The LDPE bag packaging for various highly polished hip and knee implants may adhere to the highly polished surface, leaving residue or material from the LDPE bag on the implant after it is removed from the bag. | 13,227 in total | 2020-04-02 |
| 2017-08-07 | Class II | Under Investigation by firm | There is a potential for intermittent cracks in the raw material batch used to produce the affected products. The cleanliness of the affected products could be compromised if cracks penetrate the surface of the instrument as a result of the | 842 products in total | 2018-08-23 |
| 2017-08-07 | Class II | Under Investigation by firm | There is a potential for intermittent cracks in the raw material batch used to produce the affected products. The cleanliness of the affected products could be compromised if cracks penetrate the surface of the instrument as a result of the | 842 products in total | 2018-08-23 |
| 2017-08-07 | Class II | Under Investigation by firm | There is a potential for intermittent cracks in the raw material batch used to produce the affected products. The cleanliness of the affected products could be compromised if cracks penetrate the surface of the instrument as a result of the | 842 products in total | 2018-08-23 |
| 2017-08-07 | Class II | Under Investigation by firm | There is a potential for intermittent cracks in the raw material batch used to produce the affected products. The cleanliness of the affected products could be compromised if cracks penetrate the surface of the instrument as a result of the | 842 products in total | 2018-08-23 |
| 2017-04-28 | Class II | Under Investigation by firm | Zimmer Biomet is conducting a lot-specific medical device field action for two lots of the NexGen Offset Stem Extension implants. Product complaints indicated that the size etched on the part and labeled on the product packaging were incorr | 24 | 2018-07-03 |
| 2016-01-11 | Class II | Process control | LDPE bag containing the implant adheres to the highly polished implant surface. | 32508 | 2017-05-23 |
| 2016-01-11 | Class II | Process control | LDPE bag containing the implant adheres to the highly polished implant surface. | 88389 | 2017-05-23 |
| 2016-01-11 | Class II | Process control | LDPE bag containing the implant adheres to the highly polished implant surface. | 117359 | 2017-05-23 |
| 2016-01-11 | Class II | Process control | LDPE bag containing the implant adheres to the highly polished implant surface. | 42064 | 2017-05-23 |
| 2016-01-11 | Class II | Process control | LDPE bag containing the implant adheres to the highly polished implant surface. | 61485 | 2017-05-23 |
| 2016-01-11 | Class II | Process control | LDPE bag containing the implant adheres to the highly polished implant surface. | 18093 | 2017-05-23 |
| 2016-01-11 | Class II | Process control | LDPE bag containing the implant adheres to the highly polished implant surface. | 84396 | 2017-05-23 |
Source: U.S. FDA establishment registration and device listing records, public domain. Restructured for clarity and searchability. Not affiliated with or endorsed by the FDA. Records are records: nothing here is an offer of sale.