Anatomical Shoulder™
Humeral Stem uncemented Ø9-100
6manufacturers in China registered for this device type
54catalogue numbers in this listing
8510(k) clearances naming this product code
20recalls on this code
Who Else Makes It
Concentrated in Jiangsu (3), Shanghai (2), Zhejiang (1). One is registered as a contract manufacturer, able to build to a specification.
| Manufacturer | City | Province | Registered as | Device types |
|---|---|---|---|---|
| Paragon Medical Device (Changzhou) Co., Ltd. | Changzhou | Jiangsu | Contract manufacturer | 53 |
| Zimmer (Shanghai) Medical International Trading Co., Ltd. | Shanghai | Shanghai | Exporter | 106 |
| Zhejiang Biomet Medical Products Co., Ltd. | Jinhua | Zhejiang | Contract manufacturer | 74 |
| Shanghai JPY ION-Tech Co., Ltd. | Shanghai | Shanghai | Contract manufacturer | 70 |
| Changzhou Biomet Medical Devices Co., Ltd. | Changzhou | Jiangsu | Contract manufacturer | 54 |
| Johnson & Johnson Medical (Depuy – Suzhou) Ltd. | Suzhou | Jiangsu | Manufacturer | 34 |
Record
| Listed by | Zimmer, Inc., United States |
|---|---|
| FDA product code | KWT |
| Device type | Prosthesis, Shoulder, Non-Constrained, Metal/Polymer Cemented |
| Device class | Class 2 |
| Regulation | 21 CFR 888.3650 |
| Establishment | Contract manufacturer, Specification developer, Repacker / relabeller, Manufacturer, Exporter |
| 510(k) | K142403 |
| Record published | 2015-10-16 |
| Record revised | 2023-06-28 (version 8) |
Specifications
| MRI safety | Labeling does not contain MRI Safety Information |
|---|---|
| Sterilisation | Moist Heat or Steam Sterilization |
| Supplied sterile | Yes |
| Single use | Yes |
| Prescription | Prescription only |
| Label carries | lot or batch number, expiry date, manufacturing date |
| Sizes | Length 90 to 200 mm; outer diameter 7 to 16 mm |
Catalogue Numbers
| Catalogue number | Size | Status |
|---|---|---|
| 01.04211.073 | Length 90 mm | In distribution |
| 01.04211.143 | Ø14-100 | In distribution |
| 01.04239.180 | In distribution | |
| 01.04207.103 | Ø10-110 | In distribution |
| 01.04223.240 | 40 | In distribution |
| 01.04215.143 | Outer Diameter 14 mm | In distribution |
| 01.04211.123 | Ø12-100 | In distribution |
| 01.04211.063 | Ø6-70 | In distribution |
| 01.04239.650 | In distribution | |
| 01.04239.240 | L | In distribution |
| 01.04217.173 | Ø17-200 | In distribution |
| 01.04239.800 | In distribution | |
| 01.04215.073 | Ø7-190 | In distribution |
| 01.04239.010 | In distribution | |
| 01.04214.340 | S | In distribution |
| 01.04211.163 | Outer Diameter 16 mm | In distribution |
| 01.04214.370 | M | In distribution |
| 01.04223.030 | 4.5-30 | In distribution |
| 01.04201.093 | Outer Diameter 9 mm | In distribution |
| 01.04201.053 | Ø5-70 | In distribution |
| 01.04214.400 | L | In distribution |
| 01.04239.500 | In distribution | |
| 01.04223.236 | 36 | In distribution |
| 01.04235.010 | In distribution | |
| 01.04223.048 | 4.5-48 | In distribution |
| 01.04239.110 | In distribution | |
| 01.04207.083 | Ø8-110 | In distribution |
| 01.04223.363 | 36-3 | In distribution |
| 01.04239.740 | In distribution | |
| 01.04223.196 | 0° +6mm | In distribution |
| 01.04227.523 | Ø52 r=28.5mm | In distribution |
| 01.04239.170 | In distribution | |
| 01.04239.700 | In distribution | |
| 01.04223.036 | 4.5-36 | In distribution |
| 01.04237.310 | In distribution | |
| 01.04227.409 | Ø40 r=22.8mm | In distribution |
| 01.04217.073 | Ø7-150 | In distribution |
| 01.04223.406 | 40-6 | In distribution |
| 01.04223.106 | 0° +6mm | In distribution |
| 01.04239.620 | In distribution | |
| 01.04239.670 | In distribution | |
| 01.04211.103 | Ø10.5-100 | In distribution |
| 01.04227.483 | Ø48 r=26.7mm | In distribution |
| 01.04227.443 | Ø44 r=24.3mm | In distribution |
| 01.04201.093 | Ø9-100 | In distribution |
| 01.04239.630 | In distribution | |
| 01.04558.103 | In distribution | |
| 01.04223.190 | 0° | In distribution |
| 01.04558.304 | In distribution | |
| 01.04207.054 | Ø5-90 | In distribution |
| 01.04217.093 | Ø9-180 | In distribution |
| 01.04211.073 | Ø7-90 | In distribution |
| 01.04201.073 | Outer Diameter 7 mm | In distribution |
| 01.04223.366 | 36-6 | In distribution |
Same Product Code
| Product | Sold by | Catalogue numbers |
|---|---|---|
| Equinoxe | Exactech, Inc. | 336 |
| SMR Shoulder | Limacorporate | 289 |
| Tornier Perform Humeral System | Tornier Inc. | 119 |
| Bigliani/Flatow® | Zimmer, Inc. | 119 |
| Trabecular Metal® | Zimmer, Inc. | 115 |
| Jarvis Glenoid Rerverse Shoulder Prosthesis | Fournitures Hospitalieres Industrie | 103 |
| Comprehensive® Shoulder System | Biomet Orthopedics | 86 |
| Alliance® | Zimmer, Inc. | 68 |
| Aetos Shoulder System | Smith & Nephew, Inc. | 53 |
| Perform™ Humeral System | Tornier Inc. | 47 |
| Bio-Modular® Shoulder System | Biomet Orthopedics | 43 |
| Catalyst CSR Shoulder System | Catalyst Orthoscience Inc | 39 |
Showing 12 of 164. All products under Prosthesis, Shoulder, Non-Constrained, Metal/Polymer Cemented
510(K) Clearances
| Clearance | Decision date |
|---|---|
| K150730 | 2015-06-16 |
| K121543 | 2012-10-11 |
| K110791 | 2011-09-02 |
| K103404 | 2011-03-15 |
| K050761 | 2005-04-11 |
| K041549 | 2004-09-01 |
| K982981 | 1998-12-17 |
| K790987 | 1979-06-22 |
Recalls Naming This Product
2 recalls name this product by its own identifiers, the 510(k) it is cleared under.
| Recalled by | Identified by | Initiated | FDA class | Root cause | Reason | Quantity | Closed |
|---|---|---|---|---|---|---|---|
| Zimmer, Inc. | 510(k) number | 2016-05-17 | Class II | Device Design | In some cases it has been difficult or not possible to disassemble the adjusted Dome Centric from the AS Humeral Rasp after initial positioning of the AS Humeral Trial Head which resulted in the whole construct of the Dome Centric with the | 177 | 2016-10-31 |
| Zimmer, Inc. | 510(k) number | 2012-05-12 | Class II | Mixed-up of materials/components | Bigliani/Flatow The Complete Shoulder Solution Trabecular Metal Glenoid Instrument Drill with Stop, 6 mm. Catalog number 47-4301-031-00 was actually packaged and labeled as catalog number 47-4307-031-00, lot 62071190. | 87 units | 2013-09-12 |
Recalls
9 of these are Class II. Class II means a temporary or reversible health consequence. Volume alone is not a quality signal: a manufacturer that ships more recalls more.
| Initiated | FDA class | Root cause | Reason | Quantity | Closed |
|---|---|---|---|---|---|
| 2019-10-10 | Class II | Packaging change control | Non-highly polished implants may adhere to the LDPE bag (previous packaging configuration). | 5,459,583 total devices | 2020-05-19 |
| 2019-10-10 | Class II | Packaging change control | Non-highly polished implants may adhere to the LDPE bag (previous packaging configuration). | 5,459,583 total devices | 2020-05-19 |
| 2019-10-10 | Class II | Packaging change control | Non-highly polished implants may adhere to the LDPE bag (previous packaging configuration). | 5,459,583 total devices | 2020-05-19 |
| 2017-05-22 | Class II | Process control | Various trauma and extremity instruments (drill bits and screw taps) were manufactured from raw material with an anomaly. The anomaly may be on or below the surface and can increase the risk of instrument fracture. | 2825 units | 2019-03-29 |
| 2014-01-10 | Class II | Nonconforming Material/Component | This single manufacturing lot has the potential for the bond strength between the Trabecular Metal material and substrate to be below the minimum required specification. Testing found bond strength approximately 80% of the minimum required | 10 units | 2014-09-11 |
| 2013-12-10 | Class II | Labeling mix-ups | Zimmer is initiating a lot specific recall of the CPT Hip Stem, Versys Build-Up Block, and Trabecular Metal Reverse Glenosphere medical devices due to reports of the products being packaged in the incorrect outer carton. Product labels and | 25 | 2014-09-11 |
| 2013-10-17 | Class II | Device Design | As a result of complaints for disassociation of the TM Reverse Glenosphere from the Baseplate, Zimmer updated the related surgical technique and released a video to provide additional instructions to users on how to properly assemble the Gl | 73,002 units | 2014-09-12 |
| 2013-08-01 | Class II | Device Design | Zimmer is initiating a lot specific recall of the Trabecular Metal” Reverse Glenosphere Distractor due to the potential of the device not functioning properly should it be utilized without proper lubrication. As a result, there is a potenti | 771 | 2015-03-02 |
| 2012-09-04 | Class II | Error in labeling | Zimmer Inc., is initiating a correction to the patient labels of products manufactured before March 20I0 by the Zimmer GmbH production site in Winterthur, Switzerland, after receiving four complaints of a discrepancy between product patient | 45 USA | 2014-04-16 |
| 2010-09-10 | Not classified | Device Design | The results of an investigation into complaints revealed that Trabecular Metal Humeral and/or Zimmer Trabecular Metal Reverse Humeral implants engaging in the canal earlier than expected could lead to incomplete seating of the implant, dela | 2012-09-14 | |
| 2010-09-10 | Not classified | Device Design | The results of an investigation into complaints revealed that Trabecular Metal Humeral and/or Zimmer Trabecular Metal Reverse Humeral implants engaging in the canal earlier than expected could lead to incomplete seating of the implant, dela | 9,790 total distal pilots in distribution. | 2012-09-14 |
| 2010-09-10 | Not classified | Device Design | The results of an investigation into complaints revealed that Trabecular Metal Humeral and/or Zimmer Trabecular Metal Reverse Humeral implants engaging in the canal earlier than expected could lead to incomplete seating of the implant, dela | 13,093 total reamers in distribution. | 2012-09-14 |
| 2010-09-10 | Not classified | Device Design | The results of an investigation into complaints revealed that Trabecular Metal Humeral and/or Zimmer Trabecular Metal Reverse Humeral implants engaging in the canal earlier than expected could lead to incomplete seating of the implant, dela | 13,093 total reamers in distribution. | 2012-09-14 |
| 2010-09-10 | Not classified | Device Design | The results of an investigation into complaints revealed that Trabecular Metal Humeral and/or Zimmer Trabecular Metal Reverse Humeral implants engaging in the canal earlier than expected could lead to incomplete seating of the implant, dela | 2012-09-14 | |
| 2010-09-10 | Not classified | Device Design | The results of an investigation into complaints revealed that Trabecular Metal Humeral and/or Zimmer Trabecular Metal Reverse Humeral implants engaging in the canal earlier than expected could lead to incomplete seating of the implant, dela | 9,790 total distal pilots in distribution. | 2012-09-14 |
| 2010-09-10 | Not classified | Device Design | The results of an investigation into complaints revealed that Trabecular Metal Humeral and/or Zimmer Trabecular Metal Reverse Humeral implants engaging in the canal earlier than expected could lead to incomplete seating of the implant, dela | 2012-09-14 | |
| 2006-07-20 | Not classified | Other | Components may not lock together as intended. | 197 for all three recalls Z-1416-1418-06 | 2007-12-19 |
| 2006-07-20 | Not classified | Other | Components may not lock together as intended. | 197 for all three recalls Z-1416-1418-06 | 2007-12-19 |
| 2006-07-20 | Not classified | Other | Components may not lock together as intended. | 197 for all three recalls Z-1416-1418-06 | 2007-12-19 |
Source: U.S. FDA establishment registration and device listing records, public domain. Restructured for clarity and searchability. Not affiliated with or endorsed by the FDA. Records are records: nothing here is an offer of sale.