Orthopedic
5 catalogue numbers from SSI004804, listed by Zimmer, Inc., United States, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
Global Spinal Fixation System™
4 catalogue numbers from SG0042, listed by CG MedTech Co., Ltd., South Korea, under Probe. 12 manufacturers in China are registered for this product code.
Trilogy®
3 catalogue numbers from 6260-25, listed by Zimmer, Inc., United States, under Screwdriver. 18 manufacturers in China are registered for this product code.
LDR Spine USA
14MM Distraction Screw, Quick Start, 1 Per Pack for Single Use Only
42mm off Low Profile Hum Protector
Catalogue number SSI007086, listed by Zimmer, Inc., United States, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
Optima™ Spinal System
3 catalogue numbers from SG0032, listed by CG MedTech Co., Ltd., South Korea, under Wrench. 14 manufacturers in China are registered for this product code.
Flex-Thread Ulna
3.5mm/4.5mm Soft Tissue Protector Sleeve for Cannulated Reamers
Arcad® 20
2 catalogue numbers from XDG01005, listed by Novastep, France, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
Pilling
Catalogue number IPN056054, listed by Teleflex Medical LLC, United States, under Bit, Drill. 27 manufacturers in China are registered for this product code.
Reprocessed Ectra II, Triangle Knife
Catalogue number 4448, listed by Suretek Medical, United States, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
Offset DePuy AO/Hudson Acetabular Reamer Driver
AO/Hudson motor shaft for offset reamer handles - accessory
Vanguard(TM) Microplasty(R)
3 catalogue numbers from 32-485521, listed by Biomet Orthopedics, United States, under Punch, Femoral Neck. 4 manufacturers in China are registered for this product code.
Hex Screwdriver 2.5 Mm
Catalogue number 55758-50, listed by Brainlab SE, Germany, under Screwdriver. 18 manufacturers in China are registered for this product code.
Small Joint Arthroscopic Cannula SET
Catalogue number SC95-0425, listed by Sontec Instruments, Inc., United States, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
Anatomic Trial Sizer 18×14, H06mm
Catalogue number RO1272AF0618X14, listed by Spineup Inc, United States, under Template. 21 manufacturers in China are registered for this product code.
Romero Lordotic Rasp With Stop 14×14, H09 Mm
Catalogue number RO0115LA0914X14, listed by Spineup Inc, United States, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
Romero Lordotic Rasp 16×16, H11mm
Catalogue number RO1057LD1116X16, listed by Spineup Inc, United States, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
Scott’s Distal END Cutter Plier Standard
Catalogue number 188-4430, listed by Scott's Dental Supply L.L.C., under Cutter, Wire. 10 manufacturers in China are registered for this product code.
Distal Reamer – Ø12 245mm
Catalogue number 111-552-212, listed by Signature Orthopaedics PTY Limited, Australia, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
GFS Glenoid Guide
Catalogue number 3910-800-021, listed by T.A.G Medical Products Agricultural Cooperative Association, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
7.0mm Disposable Cannulated Flexible Drill
A surgical drilling instrument (7.0mm diameter) intended to fit over the Steerable Guide or Drill Wire and creates a canal in the intramedullary space of the pelvic bones for Implant…
Angled Drill Guide
Catalogue number 02821001, listed by implantcast GmbH, Germany, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
Ratcheting Comfort Cannulated T-Handle Small Hudson Adapter
Catalogue number 0430-100, listed by Advanced Orthopaedic Solutions, Inc., United States, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
Compress® Instrument
Catalogue number 32-481029, listed by Biomet Orthopedics, United States, under Impactor. 18 manufacturers in China are registered for this product code.
UTS Hip Stem
3 catalogue numbers from 9116-3001, listed by United Orthopedic Corp., Taiwan, under Extractor. 15 manufacturers in China are registered for this product code.
Cannulated Reamer 9MM
Catalogue number 471578, listed by Biomet Orthopedics, United States, under Reamer. 23 manufacturers in China are registered for this product code.
Evolution Revision CCK System
Evolution Revision Distal FEM Resection Guide CE
AFFIXUS®130 Degree Insertion JIG
Catalogue number 211201211, listed by Biomet Orthopedics, United States, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
Maxim Tibial Resection
Catalogue number 32-347015, listed by Biomet Orthopedics, United States, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
Javelin
Instrument: Drill for 3.0mm Screw. The Javelin Tailor’s Bunion Fixation System is a single-use bone fixation device intended to be permanently implanted. The system consists of a titanium…
Integra® Spider™ Limted Wrist Fusion System
T-HANDLE QUICK COUPLE for the Integra® Spider™ Limted Wrist Fusion System
Threaded Pin – 3.2mm X 70mm
Catalogue number 5000-2511, listed by Enztec Limited, New Zealand, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
The Tether Vertebral Body Tethering System
Catalogue number 230H5501, listed by Highridge Medical, LLC, United States, under Wrench. 14 manufacturers in China are registered for this product code.
NAV Solid TAP FOR 5.5mm Fastener
Catalogue number 104-0112, listed by OsteoCentric Technologies,Inc, United States, under Tap, Bone. 12 manufacturers in China are registered for this product code.
Gauge, Depth
2 catalogue numbers from 00-1197-006-00, listed by Zimmer Trabecular Metal Technology, Inc., United States, under Gauge, Depth. 14 manufacturers in China are registered for this product code.
NexGen® Micro-Mill®
2 catalogue numbers from 5978-10-01, listed by Zimmer, Inc., United States, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
Modular Broach Handle, Grip
Catalogue number 6270.2003, listed by Enztec Limited, New Zealand, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
Custom 4mm Drill Bit
Catalogue number 141-02-1248, listed by Signature Orthopaedics PTY Limited, Australia, under Bit, Drill. 27 manufacturers in China are registered for this product code.
Conserve®
2 catalogue numbers from 48020100, listed by Microport Orthopedics Inc., United States, under Gauge, Depth. 14 manufacturers in China are registered for this product code.
XBraid Grasper, Elite
Catalogue number 242-200-034, listed by T.A.G Medical Products Agricultural Cooperative Association, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
Pin Impactor
Catalogue number 77000108, listed by implantcast GmbH, Germany, under Impactor. 18 manufacturers in China are registered for this product code.
4MM SET Screw Driver Shaft
Catalogue number 14-442005, listed by Biomet Orthopedics, United States, under Screwdriver. 18 manufacturers in China are registered for this product code.
Quick-Coupling Handle for Flexible Osteotomes
Catalogue number 10-020-000, listed by Symmetry Medical, United States, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
1/4″ Square Drill Chuck
Catalogue number SR99-6002, listed by Surgentec LLC, United States, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
Imbibe
Fenestrated Bone Marrow Aspiration Needle with Bullet Tip, Bullet Tip Stylet, Stylet
Polyax®calibrated Drill
3 catalogue numbers from 2141-13-132, listed by Biomet Orthopedics, United States, under Bit, Drill. 27 manufacturers in China are registered for this product code.
Calibrated 3.2MM X 250MM
Catalogue number 27565, listed by Biomet Orthopedics, United States, under Bit, Drill. 27 manufacturers in China are registered for this product code.
Cannulated Screw T-Handle
Catalogue number 329702, listed by Biomet Orthopedics, United States, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
Sliding Suture Cutter
Sliding Suture Cutter: 4 catalogue numbers listed by T.A.G Medical Products Agricultural Cooperative Association, under Cutter, Wire. 10 manufacturers in China are registered for this product code.
Pin Introducer, 11g X 5cm
Catalogue number 2231-1105, listed by Captiva Spine, Inc., United States, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
Spherical Patella Trial Size Ø28x9mm
Catalogue number 122-18-0492, listed by Signature Orthopaedics PTY Limited, Australia, under Template. 21 manufacturers in China are registered for this product code.
Small HEX Screwdriver With Groove
Catalogue number 939999569, listed by Biomet Orthopedics, United States, under Screwdriver. 18 manufacturers in China are registered for this product code.
BI-Angular Shoulder System
2 catalogue numbers from 434443, listed by Biomet Orthopedics, United States, under Template. 21 manufacturers in China are registered for this product code.
Drill, 2.2mm SureLock™ All-Suture Anchor
Catalogue number CM9620, listed by Cayenne Medical, Inc., United States, under Bit, Drill. 27 manufacturers in China are registered for this product code.
Compress® Instrument
Catalogue number 32-481125, listed by Biomet Orthopedics, United States, under Screwdriver. 18 manufacturers in China are registered for this product code.
OSS NON-Modular Tibial Plate Trial
3 catalogue numbers from 32-472169, listed by Biomet Orthopedics, United States, under Template. 21 manufacturers in China are registered for this product code.
Diamond Point- Tibia AWL
Catalogue number 470320, listed by Biomet Orthopedics, United States, under Awl. 13 manufacturers in China are registered for this product code.
Burr Coarse 12MM
Catalogue number 19532, listed by Biopro, Inc., United States, under Burr, Orthopedic. 3 manufacturers in China are registered for this product code.
Low Profile Tibial Cut Block, Left, Klassic ONE
Low Profile Tibial Cut Block, Left
Kyphon V™ Osteo Introducer® 11 Ga Trocar/Bevel KIT
Toolkit KSUB0021 11G Stylets/Cannula CDS
Counter Torque Wrench, Dynafuse
Catalogue number 3100-06-0001, listed by Medshape, Inc., United States, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
Lordotic Trial Sizer With Stop 16×12, H09mm
Catalogue number RO0535LC0916X12, listed by Spineup Inc, United States, under Template. 21 manufacturers in China are registered for this product code.
9.0mm Drill Sleeve
Sleeve fits inside Soft Tissue Sleeve or can be used alone, designed for percutaneous access of the Step Drill, Steerable Guide Sleeve, Exchange Tube and Driving Guidewire.
Montblanc Guide Block Drill Guide
Catalogue number RFM005, listed by Medifield Medical Co., Ltd., South Korea, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
Spartan Calcar Planer Blade
3 catalogue numbers from 112-212-606, listed by Signature Orthopaedics PTY Limited, Australia, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
Trocar, Screw
2 catalogue numbers from 8207-55-002, listed by Biomet Orthopedics, United States, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
Romero Lordotic Rasp With Stop 18×16, H05mm
Catalogue number RO0181L30518X16, listed by Spineup Inc, United States, under Orthopedic Manual Surgical Instrument. 53 manufacturers in China are registered for this product code.
Lordotic Trial Sizer With Stop 14×16, H13mm
Catalogue number RO0529LB1314X16, listed by Spineup Inc, United States, under Template. 21 manufacturers in China are registered for this product code.
Cervical Tap Primary With Stop L08
Catalogue number GN0050T108, listed by Spineup Inc, United States, under Bit, Drill. 27 manufacturers in China are registered for this product code.
Vilex
3 catalogue numbers from JF-TAP-55, listed by Provision, under Bit, Drill. 27 manufacturers in China are registered for this product code.
InterSpace Hip Trial, 60mm Short
Catalogue number IHT60S, listed by Tecres SPA, Italy, under Template. 21 manufacturers in China are registered for this product code.
HUM TR NE +0MM EXT 40 +3MM STD
Catalogue number SSI007862, listed by Zimmer, Inc., United States, under Template. 21 manufacturers in China are registered for this product code.
18.25X380MM Bullet-TIP Reamer
Catalogue number SSI006031, listed by Zimmer, Inc., United States, under Reamer. 23 manufacturers in China are registered for this product code.
WasherCap™ Countersink Positioner 10mm
WasherCap™ Countersink Positioner 10mm: 1 catalogue number listed by Abanza Tecnomed SL., under Positioner, Socket. 4 manufacturers in China are registered for this product code.
Citrelock ACL 8mm Tibial Reamer
Catalogue number 40-103-1080, listed by Acuitive Technologies, United States, under Reamer. 23 manufacturers in China are registered for this product code.
Reprocessed 7.0mm Egg Bur, With Mini Quick Coupling
Catalogue number 03.000.173, listed by Suretek Medical, United States, under Burr, Orthopedic. 3 manufacturers in China are registered for this product code.