Aspiron™ ACP System
227 catalogue numbers from NC4320VT, listed by CG MedTech Co., Ltd., South Korea, under Appliance, Fixation, Spinal Intervertebral Body. 14 manufacturers in China are registered for this product code.
227 catalogue numbers from NC4320VT, listed by CG MedTech Co., Ltd., South Korea, under Appliance, Fixation, Spinal Intervertebral Body. 14 manufacturers in China are registered for this product code.
NovoKnee is a cemented total knee replacement system with femoral, tibial and patellar components. A polyethylene tibial insert articulates with the femoral component and snaps into a…
The ZSFab Lumbar Interbody System uses additively manufactured titanium-alloy cages for lumbar fusion. Each implant combines a solid frame, porous lattice structures and a central cavity…
SA Cervical-TL, Fixed Guided Tip Caddy
Cann Countersink FOR 6.5/7.5MM Headed Cann SCR + / LRG QC Long-Ster
AUTOBAHN CoCr Headless Locking Screw, 4mmx77.5mm, Partially Threaded
SI-LOK is a sacroiliac-joint fusion system using cannulated screws, with optional preassembled contouring washers. The screws may be fully or partly threaded and are available with or…
SS REVERE Offset Extension Clamp, 6.0mm-6.5mm, 6.35mm Rod, Right, 200mm Length
SS Top Loading T-Connector for 3.7mm Rod, 26-46mm, Straight
506 catalogue numbers from 2253-20-37, listed by Zimmer, Inc., United States, under Rod, Fixation, Intramedullary And Accessories. 17 manufacturers in China are registered for this product code.
Modular Cannulated Fenestrated Polyaxial Bone Screw
Straight Transforaminal Lumbar Cage
iBALANCE TKA, BEARING IMP, PS, SZ 3, 9MM
500 catalogue numbers from 8711-5008, listed by Biomet Spine, United States, under Intervertebral Fusion Device With Bone Graft, Lumbar. 14 manufacturers in China are registered for this product code.
74 catalogue numbers from 14-448326, listed by Biomet Orthopedics, United States, under Plate, Fixation, Bone. 22 manufacturers in China are registered for this product code.
74 catalogue numbers from 14-455580, listed by Biomet Orthopedics, United States, under Device, Fixation, Proximal Femoral, Implant. 2 manufacturers in China are registered for this product code.
8 catalogue numbers from 8515-65-105, listed by Biomet Orthopedics, United States, under Appliance, Fixation, Nail/Blade/Plate Combination, Multiple Component, Metal Composite. 6 manufacturers in China are registered for this product code.
Cutting Edge Advantage Secur-FIT Omnifit EON Broach C12/PF14
Triathlon PS Tibial Insert N2VAC Polyethylene
SCR X0209481 TSR3 21PS OG TI Hact 7.0X20
Solid Polyaxial Iliac Deformity Screw, Monaco
Otlif Spacer, Peek, 10MMX22MMX11MMX5°, NON-Sterile
Astura Medical’s BRIDALVEIL Offset Counter Torque is an accessory used with the BRIDALVEIL cervical spinal fixation system. It stabilizes the adjacent rod while a separate torque shaft…
LLIF IMPLANT - 7° x 22MM IMPLANTS Lordosis & Heights: 12-15mm x 7° x 60mm Collapsed Width (mm): 13.34 Expanded Width (mm): 22 Collapsed Height (mm): 12.5 Expanded Height (mm): 15.5…
2 catalogue numbers from FCP1207, listed by Captiva Spine, Inc., United States, under Intervertebral Fusion Device With Bone Graft, Cervical. 7 manufacturers in China are registered for this product code.
BONE SCREW, CORTICAL CANCELLOUS, 11.5mm X 110mm
2-2 Assembly Block Base, FORTICO System
Ø6.5mm X 100mm DL MIS Pedicle Screw Assy
SureMAX Cervical Spacer, 14° Hyperlordotic Medium (14mm x 16mm) x 12mm
DYMAXEON 5.5 POLYAXIAL SPONDYLOLISTHESIS CANNULATED SCREW Ø6.5X70mm (GREEN)
Idys LLIF 3DTi is a lateral lumbar interbody fusion system with an additively manufactured titanium-alloy cage. Its porous lattice and rough outer surfaces provide the structure of the…
16 catalogue numbers from LJV163, listed by Tornier Inc., United States, under Prosthesis, Ankle, Semi-Constrained, Cemented, Metal/Polymer. 1 manufacturer in China is registered for this product code.
2 catalogue numbers from ISRO1220L09CA1, listed by Spineup Inc, United States, under Intervertebral Fusion Device With Integrated Fixation, Cervical. 5 manufacturers in China are registered for this product code.
Anterolateral Disc Prep, Straight Drop-In Tray, Bottom
CREO 4.75 Threaded 10.5 x 100mm Uniplanar Reduction Screw, CoCr Head, Ti Shank
The EXPRESS interbody fusion device supports lumbar fusion through a transforaminal approach. It is intended for skeletally mature patients with degenerative disc disease at one or two…
247 catalogue numbers from 7722-8570, listed by Biomet Spine, United States, under Thoracolumbosacral Pedicle Screw System. 15 manufacturers in China are registered for this product code.
87 catalogue numbers from 7701-6160, listed by Biomet Spine, United States, under Orthosis, Spinal Pedicle Fixation. 13 manufacturers in China are registered for this product code.
19 catalogue numbers from 14-447724, listed by Biomet Orthopedics, United States, under Plate, Fixation, Bone. 22 manufacturers in China are registered for this product code.
Cadence Insert. Size 1 Right 11MM Posterior-Biased
Implant 4240141 Anatomic C 14X11X 11MM
Cannulated Screw SZ. 7MMX100MM.16MM PT
Rod Hex End Straight CoCr 5.5mm X 500mm
Fenestrated Cortical-Cancellous Threaded Screw 10.5 x 105
EMERGE is an anterior cervical plate-and-screw system for fixation from C2 through C7. The plate attaches to the front of the cervical vertebral bodies, with screws anchoring the selected…
ROD TO ROD Connector - 5.5MM X 6.35MM - Side BY Side Closed, Double
Catalogue number HCS 032, listed by Flower Orthopedics Corporation, United States, under Screw, Fixation, Bone. 31 manufacturers in China are registered for this product code.
Implants for orthopedic bone fixation. Also Called a Bone Screw.
Catalogue number 100-0611-009, listed by Mahe Intl., Inc., United States, under Plate, Fixation, Bone. 22 manufacturers in China are registered for this product code.
22 catalogue numbers from 108812210, listed by Tyber Medical, United States, under Intervertebral Fusion Device With Bone Graft, Lumbar. 14 manufacturers in China are registered for this product code.
Maxframe(TM) Polyaxial Strut Fine AND Gross Adjust/X-Short
Alteon Short Tapered Wedge Stem, Standard Offset, Size 14
2 catalogue numbers from ISRO1420L07CB1, listed by Spineup Inc, United States, under Intervertebral Fusion Device With Integrated Fixation, Cervical. 5 manufacturers in China are registered for this product code.
ø4.5mm STEINMANN PIN, 9" SINGLE DIAMOND (ROUND END), FULLY THREADED
Tibial Insert Trial CR Univ-Sz 8, 13mm
Locking Distractor, Hinged, 80 mm Arms, Left, 120 mm Rack (CS-0138)
3.5 mm Ti Variable Angle Screw Length 52 mm, Dark Purple
The Anjon Bremer Halo System immobilizes the cervical spine by fixing the skull relative to the torso. Four titanium skull pins attach to an aluminium crown or ring, which connects through…
CosmoLock is a top-loading posterior spinal fixation system of pedicle screws, rods and crosslinks. Its components form a support construct that immobilizes and stabilizes spinal segments…
Primary Knee Poly Insert SZ 1 Right MED Conforming 17MM
Catalogue number 870090, listed by SI-Bone, Inc., United States, under Sacroiliac Joint Fixation. 3 manufacturers in China are registered for this product code.
Align Ti Lateral Interbody 18x50x10 12°, STERILE
Europa Pedicle Screw System is a spinal fixation family with screw-and-rod configurations for open and minimally invasive surgery. Pedicle screws anchor the posterior construct to vertebral…
Catalogue number 121-20-7192RE, listed by Signature Orthopaedics PTY Limited, Australia, under Prosthesis, Knee, Patello/Femorotibial, Semi-Constrained, Uncemented, Porous, Coated, Polymer/Metal/Polymer. 12 manufacturers in China are registered for this product code.
54 catalogue numbers from 01-040-02-0570, listed by Signature Orthopaedics PTY Limited, Australia, under Prosthesis, Hip, Semi-Constrained, Metal/Polymer, Porous Uncemented. 14 manufacturers in China are registered for this product code.
EXPEDIUM SPINE SYSTEM SLOTTED CONNECTOR FOR POLYAXIAL BOLT, MINI OFFSET LEFT 5.5/6.35mm
The PYXIS 3D Titanium Cage devices are designed for restoring the height of the intervertebral space after resection of the disc.The PYXIS 3D Titanium Cage devices consist of implants in…
Lateral Open Connector Normal Anodized (L1: 34, L2: 20)
INHANCE SHOULDER SYSTEM REVERSE 145 LINER RETENTIVE X-LINKED VITAMIN E PE Ø40+4mm
Attune Knee System Revision Hinge Femoral 8 Right Cemented Caution:intended FOR Cemented USE Only
Agility LP Total Ankle System Poly Insert Mismatch Size 5/4
FIX-L PEEK PLIF and T-PLIF System is a lumbar interbody cage range used with bone graft and supplemental fixation. The cage provides the interbody component of the fusion construct between…
11 catalogue numbers from SO-25-SFTS-108, listed by Jeil Medical Corporation, South Korea, under Plate, Fixation, Bone. 22 manufacturers in China are registered for this product code.
Bencox THR instrumentation is a range of reusable trials and placement tools used with Bencox hip implants. Trial heads, shells, liners and bipolar cups help assess component geometry and…
SDS Growing Rod is a spinal implant system designed to correct early-onset deformity while allowing spinal growth. Its construct combines one or two springs with sliding bearings and 5.5 mm…
Screw X0909045 PYR TI Canc Duld 6.5X27.5
HAnano STATIC Ti ALIF 40 X 28mm 15deg 18mm (P 10mm)
SMR Shoulder - Glenosph. Dia. 42-Ecc.42 Extract. Insert
2.0/2.4/2.7 Volar Ulnar Corner Plate 2Hd/3Shft/Lft/5Hks/41mm
STD Cemented Femur #4 Narrow L TiNbN coated
Fortilink-C Inserter Housing w/Slaphammer
Catalogue number 121-20-A252, listed by Signature Orthopaedics PTY Limited, Australia, under Prosthesis, Knee, Patello/Femorotibial, Semi-Constrained, Uncemented, Porous, Coated, Polymer/Metal/Polymer. 12 manufacturers in China are registered for this product code.
Trial, Size 11.5x14.5x14 mm, 7°
L&K Biomed Poly Lateral Connector, Closed, Knurling L1:41, L2:25, W:12,D:6 1EA
Cannulated Poly Axial Screw 281-5530:D 5.5 x L 30(mm)
REDAPT Anteverted Cemented Screw In Trial Liner 40MM X 76-80MM
Journey II Articular Stabilized Xlpe Articular Insert Size 3-4 Right 18MM
Legion Hinge Guided Motion Tibial Insert 25MM Size 2-3 Right
R3 20 Degree Permanent Trial Liner 44MM Inner Diameter X 76-80MM Outer Diameter
Lamina Hook Small. The Coral Spinal System consists of a variety of types and sizes of rods, hooks, screws, and connectors. The Coral Spinal System implant components can be rigidly locked…
6.5MM Wedge HS Suture Anchor II With Half Circle Taper Needles, 2 Strands #2 Force Fiber
469 catalogue numbers from 14-522472, listed by Biomet Spine, United States, under Appliance, Fixation, Spinal Intervertebral Body. 14 manufacturers in China are registered for this product code.
386 catalogue numbers from 14-563265, listed by Biomet Spine, United States, under Orthosis, Spondylolisthesis Spinal Fixation. 13 manufacturers in China are registered for this product code.
438 catalogue numbers from 14-563880, listed by Biomet Spine, United States, under Appliance, Fixation, Spinal Intervertebral Body. 14 manufacturers in China are registered for this product code.
877 catalogue numbers from 14-578350, listed by Biomet Spine, United States, under Appliance, Fixation, Spinal Intervertebral Body. 14 manufacturers in China are registered for this product code.
125 catalogue numbers from 101M2610, listed by Biomet Spine, United States, under Intervertebral Fusion Device With Bone Graft, Lumbar. 14 manufacturers in China are registered for this product code.
36 catalogue numbers from 8725-4516, listed by Biomet Spine, United States, under Intervertebral Fusion Device With Bone Graft, Lumbar. 14 manufacturers in China are registered for this product code.
61 catalogue numbers from 110004106, listed by Biomet Orthopedics, United States, under Prosthesis, Knee, Patello/Femoral, Semi-Constrained, Cemented, Metal/Polymer. 7 manufacturers in China are registered for this product code.
192 catalogue numbers from 27750, listed by Biomet Orthopedics, United States, under Plate, Fixation, Bone. 22 manufacturers in China are registered for this product code.
Interbody Fusion Device nanoLOCK Surface Technology 12 Degree Standard 12mm
Angled Open Tulip Domino Rod to Rod Connector 5.5mm DA
Every device page names the company that lists it and the factories registered to make the same thing. These are the sections with the most of them.