Balance Knee Revision System
Size 5 Tibial Augment Wedge 10 Degrees RT Lat/LT Med
21manufacturers in China registered for this device type
252catalogue numbers in this listing
15510(k) clearances naming this product code
14recalls on this code
Who Else Makes It
Concentrated in Jiangsu (10), Shanghai (4), Beijing (3). 13 of them are registered as contract manufacturers, able to build to a buyer’s own specification.
| Manufacturer | City | Province | Registered as | Device types |
|---|---|---|---|---|
| MicroPort Orthopedics Global Supply Center Limited | Shanghai | Shanghai | Contract manufacturer | 82 |
| Zhejiang Biomet Medical Products Co., Ltd. | Jinhua | Zhejiang | Contract manufacturer | 74 |
| Paragon Medical Device (Changzhou) Co., Ltd. | Changzhou | Jiangsu | Contract manufacturer | 53 |
| Canwell Medical Co., Ltd. | Jinhua | Zhejiang | Contract manufacturer | 42 |
| Suzhou Elite Precision Machinery Co., Ltd. | Kunshan | Jiangsu | Contract manufacturer | 35 |
| Guangzhou Aquila Precise Tools Limited | Guangzhou | Guangdong | Contract manufacturer | 28 |
| B-ONE Medical (Suzhou) Co., Ltd. | Suzhou | Jiangsu | Contract manufacturer | 23 |
| LX Precision Shanghai Co Ltd | Shanghai | Shanghai | Contract manufacturer | 19 |
| Stryker (Suzhou) Medical Technology Co., Ltd. | Suzhou | Jiangsu | Contract manufacturer | 19 |
| Stryker Orthmed (Changzhou) Medical Instrument Co., Ltd. | Changzhou | Jiangsu | Contract manufacturer | 10 |
| b-ONE Medical (Beijing) Co., Ltd. | Beijing | Beijing | Contract manufacturer | 7 |
| Changzhou Wastonortho Medical Appliance Co., Ltd. | Changzhou | Jiangsu | Contract manufacturer | 5 |
Showing 12 of 21. All 21 manufacturers in China registered for Prosthesis, Knee, Patellofemorotibial, Semi-Constrained, Cemented, Polymer/Metal/Polymer
Record
| Listed by | Ortho Development Corp., United States |
|---|---|
| FDA product code | JWH |
| Device type | Prosthesis, Knee, Patellofemorotibial, Semi-Constrained, Cemented, Polymer/Metal/Polymer |
| Device class | Class 2 |
| Regulation | 21 CFR 888.3560 |
| Establishment | Specification developer, Complaint-file establishment, Manufacturer, Exporter |
| 510(k) | K060569 |
| Record published | 2015-08-31 |
| Record revised | 2023-02-03 (version 4) |
Specifications
| MRI safety | Labeling does not contain MRI Safety Information |
|---|---|
| Supplied sterile | Yes |
| Single use | Yes |
| Prescription | Prescription only |
| Label carries | lot or batch number, expiry date |
| Sizes | Height 3 to 30 mm; length 30 to 150 mm; outer diameter 10 to 24 mm; angle 5 to 20 ° |
| UDI direct marking | Exempt |
Catalogue Numbers
| Catalogue number | Size | Status |
|---|---|---|
| 563-1214 | Height 14 mm | In distribution |
| 563-1618 | Height 18 mm | In distribution |
| 567-1105 | Angle 10 ° | In distribution |
| 563-1218 | Height 18 mm | In distribution |
| 568-1408 | Height 8 mm | In distribution |
| 561-1701 | In distribution | |
| 563-1528 | Height 28 mm | In distribution |
| 563-1526 | Height 26 mm | In distribution |
| 567-1202 | Angle 10 ° | In distribution |
| 567-2203 | Angle 20 ° | In distribution |
| 563-1222 | Height 22 mm | In distribution |
| 563-1516 | Height 16 mm | In distribution |
| 566-1711 | Length 110 mm | In distribution |
| 566-1608 | Length 80 mm | In distribution |
| 568-2304 | Height 4 mm | In distribution |
| 567-7203 | Height 15 mm | In distribution |
| 563-1630 | Height 30 mm | In distribution |
| 566-1715 | Outer Diameter 17 mm | In distribution |
| 568-2608 | Height 8 mm | In distribution |
| 562-3001 | In distribution | |
| 561-5000 | Angle 5 ° | In distribution |
| 563-1314 | Height 14 mm | In distribution |
| 567-1106 | Angle 10 ° | In distribution |
| 568-1304 | Height 4 mm | In distribution |
| 566-2408 | Length 80 mm | In distribution |
| 568-1508 | Height 8 mm | In distribution |
| 567-5105 | Height 5 mm | In distribution |
| 568-2404 | Height 4 mm | In distribution |
| 567-2205 | Angle 20 ° | In distribution |
| 567-7105 | Height 15 mm | In distribution |
| 566-1708 | Length 80 mm | In distribution |
| 563-1514 | Height 14 mm | In distribution |
| 568-2408 | Height 8 mm | In distribution |
| 562-3100 | In distribution | |
| 563-1128 | Height 28 mm | In distribution |
| 567-5103 | Height 5 mm | In distribution |
| 565-1403 | Length 30 mm | In distribution |
| 563-1622 | Height 22 mm | In distribution |
| 561-1102 | In distribution | |
| 567-2103 | Angle 20 ° | In distribution |
| 563-1118 | Height 18 mm | In distribution |
| 566-1515 | Length 150 mm | In distribution |
| 567-7202 | Height 15 mm | In distribution |
| 567-2101 | Angle 20 ° | In distribution |
| 567-6104 | Height 10 mm | In distribution |
| 562-1600 | In distribution | |
| 562-1200 | In distribution | |
| 561-1202 | In distribution | |
| 566-2215 | Length 150 mm | In distribution |
| 563-1518 | Height 18 mm | In distribution |
| 567-7104 | Height 15 mm | In distribution |
| 567-7101 | Height 15 mm | In distribution |
| 567-7102 | Height 15 mm | In distribution |
| 563-1612 | Height 12 mm | In distribution |
| 567-1103 | Angle 10 ° | In distribution |
| 567-6205 | Height 10 mm | In distribution |
| 563-1530 | Height 30 mm | In distribution |
| 561-1302 | In distribution | |
| 565-1208 | Length 80 mm | In distribution |
| 567-1204 | Angle 10 ° | In distribution |
| 567-5201 | Height 5 mm | In distribution |
| 567-5203 | Height 5 mm | In distribution |
| 563-1520 | Height 20 mm | In distribution |
| 568-1108 | Height 8 mm | In distribution |
| 563-1624 | Height 24 mm | In distribution |
| 567-1201 | Angle 10 ° | In distribution |
| 566-2211 | Outer Diameter 22 mm | In distribution |
| 567-5206 | Height 5 mm | In distribution |
| 566-1015 | Outer Diameter 10 mm | In distribution |
| 563-1108 | Height 8 mm | In distribution |
| 566-1408 | Outer Diameter 14 mm | In distribution |
| 563-1430 | Height 30 mm | In distribution |
| 562-1400 | In distribution | |
| 563-1208 | Height 8 mm | In distribution |
| 566-1311 | Outer Diameter 13 mm | In distribution |
| 565-1408 | Outer Diameter 14 mm | In distribution |
| 566-1615 | Length 150 mm | In distribution |
| 568-1212 | Height 12 mm | In distribution |
| 567-7106 | Height 15 mm | In distribution |
| 563-1410 | Height 10 mm | In distribution |
| 561-1702 | In distribution | |
| 563-1224 | Height 24 mm | In distribution |
| 563-1116 | Height 16 mm | In distribution |
| 568-1412 | Height 12 mm | In distribution |
| 566-1008 | Length 80 mm | In distribution |
| 563-1312 | Height 12 mm | In distribution |
| 566-2008 | Outer Diameter 20 mm | In distribution |
| 563-1112 | Height 12 mm | In distribution |
| 563-1426 | Height 26 mm | In distribution |
| 568-1708 | Height 8 mm | In distribution |
| 562-2500 | In distribution | |
| 567-1102 | Angle 10 ° | In distribution |
| 568-2504 | Height 4 mm | In distribution |
| 566-2415 | Outer Diameter 24 mm | In distribution |
| 566-1808 | Outer Diameter 18 mm | In distribution |
| 567-1104 | Angle 10 ° | In distribution |
| 563-1610 | Height 10 mm | In distribution |
| 567-1203 | Angle 10 ° | In distribution |
| 565-1412 | Outer Diameter 14 mm | In distribution |
| 561-1201 | In distribution | |
| 566-1411 | Length 110 mm | In distribution |
| 567-5101 | Height 5 mm | In distribution |
| 562-3500 | In distribution | |
| 563-1130 | Height 30 mm | In distribution |
| 563-1308 | Height 8 mm | In distribution |
| 568-2208 | Height 8 mm | In distribution |
| 561-1301 | In distribution | |
| 568-1308 | Height 8 mm | In distribution |
| 563-1626 | Height 26 mm | In distribution |
| 565-1212 | Outer Diameter 12 mm | In distribution |
| 568-2104 | Height 4 mm | In distribution |
| 563-1328 | Height 28 mm | In distribution |
| 561-1502 | In distribution | |
| 563-1330 | Height 30 mm | In distribution |
| 563-1230 | Height 30 mm | In distribution |
| 566-1108 | Length 80 mm | In distribution |
| 562-2600 | In distribution | |
| 567-5204 | Height 5 mm | In distribution |
| 563-1216 | Height 16 mm | In distribution |
| 566-1211 | Outer Diameter 12 mm | In distribution |
| 567-6101 | Height 10 mm | In distribution |
| 561-1401 | In distribution | |
| 563-1212 | Height 12 mm | In distribution |
| 567-6206 | Height 10 mm | In distribution |
| 563-1316 | Height 16 mm | In distribution |
| 566-1208 | Outer Diameter 12 mm | In distribution |
| 563-1114 | Height 14 mm | In distribution |
| 567-5104 | Height 5 mm | In distribution |
| 567-1205 | Angle 10 ° | In distribution |
| 568-1104 | Height 4 mm | In distribution |
| 566-1115 | Outer Diameter 11 mm | In distribution |
| 567-7204 | Height 15 mm | In distribution |
| 566-1215 | Length 150 mm | In distribution |
| 561-7000 | Angle 7 ° | In distribution |
| 567-7201 | Height 15 mm | In distribution |
| 568-1608 | Height 8 mm | In distribution |
| 561-1101 | In distribution | |
| 563-1120 | Height 20 mm | In distribution |
| 566-1811 | Length 110 mm | In distribution |
| 566-1915 | Length 150 mm | In distribution |
| 566-1911 | Outer Diameter 19 mm | In distribution |
| 563-1126 | Height 26 mm | In distribution |
| 563-1614 | Height 14 mm | In distribution |
| 561-1602 | In distribution | |
| 566-2011 | Length 110 mm | In distribution |
| 563-1310 | Height 10 mm | In distribution |
| 562-3005 | Height 5 mm | In distribution |
| 562-1100 | In distribution | |
| 566-1511 | Length 110 mm | In distribution |
| 567-6202 | Height 10 mm | In distribution |
| 563-1320 | Height 20 mm | In distribution |
| 563-1324 | Height 24 mm | In distribution |
| 568-1404 | Height 4 mm | In distribution |
| 563-1318 | Height 18 mm | In distribution |
| 563-1326 | Height 26 mm | In distribution |
| 567-1101 | Angle 10 ° | In distribution |
| 563-1418 | Height 18 mm | In distribution |
| 562-1300 | In distribution | |
| 565-1405 | Outer Diameter 14 mm | In distribution |
| 566-1508 | Outer Diameter 15 mm | In distribution |
| 563-1512 | Height 12 mm | In distribution |
| 567-6102 | Height 10 mm | In distribution |
| 563-1416 | Height 16 mm | In distribution |
| 566-1815 | Length 150 mm | In distribution |
| 566-1415 | Outer Diameter 14 mm | In distribution |
| 567-7103 | Height 15 mm | In distribution |
| 568-2108 | Height 8 mm | In distribution |
| 568-1604 | Height 4 mm | In distribution |
| 562-3200 | In distribution | |
| 566-1611 | Length 110 mm | In distribution |
| 562-2100 | In distribution | |
| 568-1512 | Height 12 mm | In distribution |
| 563-1220 | Height 20 mm | In distribution |
| 562-3007 | Height 7 mm | In distribution |
| 563-1510 | Height 10 mm | In distribution |
| 568-2308 | Height 8 mm | In distribution |
| 567-2106 | Angle 20 ° | In distribution |
| 568-2508 | Height 8 mm | In distribution |
| 562-2300 | In distribution | |
| 567-2201 | Angle 20 ° | In distribution |
| 568-1312 | Height 12 mm | In distribution |
| 563-1420 | Height 20 mm | In distribution |
| 568-2604 | Height 4 mm | In distribution |
| 562-3400 | In distribution | |
| 567-6106 | Height 10 mm | In distribution |
| 562-2200 | In distribution | |
| 568-1704 | Height 4 mm | In distribution |
| 567-1206 | Angle 10 ° | In distribution |
| 563-1422 | Height 22 mm | In distribution |
| 561-1501 | In distribution | |
| 568-1504 | Height 4 mm | In distribution |
| 567-2206 | Angle 20 ° | In distribution |
| 566-1111 | Length 110 mm | In distribution |
| 566-2015 | Length 150 mm | In distribution |
| 563-1412 | Height 12 mm | In distribution |
| 567-7205 | Height 15 mm | In distribution |
| 562-1500 | In distribution | |
| 567-5205 | Height 5 mm | In distribution |
| 563-1210 | Height 10 mm | In distribution |
| 563-1424 | Height 24 mm | In distribution |
| 561-1601 | In distribution | |
| 568-1204 | Height 4 mm | In distribution |
| 567-6103 | Height 10 mm | In distribution |
| 568-2708 | Height 8 mm | In distribution |
| 563-1226 | Height 26 mm | In distribution |
| 563-1620 | Height 20 mm | In distribution |
| 567-6204 | Height 10 mm | In distribution |
| 568-1612 | Height 12 mm | In distribution |
| 563-1616 | Height 16 mm | In distribution |
| 567-2204 | Angle 20 ° | In distribution |
| 566-1315 | Length 150 mm | In distribution |
| 568-2704 | Height 4 mm | In distribution |
| 562-3600 | In distribution | |
| 563-1522 | Height 22 mm | In distribution |
| 563-1122 | Height 22 mm | In distribution |
| 563-1414 | Height 14 mm | In distribution |
| 563-1508 | Height 8 mm | In distribution |
| 563-1408 | Height 8 mm | In distribution |
| 563-1608 | Height 8 mm | In distribution |
| 563-1124 | Height 24 mm | In distribution |
| 567-2102 | Angle 20 ° | In distribution |
| 567-5106 | Height 5 mm | In distribution |
| 566-1908 | Length 80 mm | In distribution |
| 563-1322 | Height 22 mm | In distribution |
| 568-1712 | Height 12 mm | In distribution |
| 566-2208 | Length 80 mm | In distribution |
| 567-2105 | Angle 20 ° | In distribution |
| 567-2104 | Angle 20 ° | In distribution |
| 566-1011 | Outer Diameter 10 mm | In distribution |
| 563-1110 | Height 10 mm | In distribution |
| 563-1228 | Height 28 mm | In distribution |
| 566-2411 | Length 110 mm | In distribution |
| 561-1402 | In distribution | |
| 562-2400 | In distribution | |
| 567-2202 | Angle 20 ° | In distribution |
| 562-3300 | In distribution | |
| 566-1308 | Length 80 mm | In distribution |
| 565-1205 | Outer Diameter 12 mm | In distribution |
| 567-5202 | Height 5 mm | In distribution |
| 565-1203 | Length 30 mm | In distribution |
| 567-6203 | Height 10 mm | In distribution |
| 567-5102 | Height 5 mm | In distribution |
| 567-7206 | Height 15 mm | In distribution |
| 562-3003 | Height 3 mm | In distribution |
| 567-6105 | Height 10 mm | In distribution |
| 568-1208 | Height 8 mm | In distribution |
| 563-1628 | Height 28 mm | In distribution |
| 563-1428 | Height 28 mm | In distribution |
| 568-2204 | Height 4 mm | In distribution |
| 562-3000 | In distribution |
Showing 250 of 252 catalogue numbers.
Same Product Code
| Product | Sold by | Catalogue numbers |
|---|---|---|
| Prophecy® | Microport Orthopedics Inc. | 4,423 |
| Exult Knee Replacement System | Corentec Co., Ltd. | 1,770 |
| Freedom | Maxx Orthopedics Inc. | 1,693 |
| Legion | Smith & Nephew, Inc. | 1,534 |
| MyKnee | Medacta International SA | 1,466 |
| Journey | Smith & Nephew, Inc. | 1,339 |
| Persona® | Zimmer, Inc. | 1,254 |
| DJO Surgical | Encore Medical, L.P. | 1,131 |
| U2 Total Knee System | United Orthopedic Corp. | 1,078 |
| CKS Plus | Shalby Advanced Technologies, Inc. | 1,024 |
| Lospa Modular Knee System | Corentec Co., Ltd. | 1,020 |
| Natural-Knee® | Zimmer, Inc. | 980 |
Showing 12 of 1,175. All products under Prosthesis, Knee, Patellofemorotibial, Semi-Constrained, Cemented, Polymer/Metal/Polymer
510(K) Clearances
| Clearance | Decision date |
|---|---|
| K242984 | 2024-10-25 |
| K233093 | 2023-10-25 |
| K182085 | 2018-10-31 |
| K181569 | 2018-10-12 |
| K180743 | 2018-06-20 |
| K152169 | 2015-10-27 |
| K133449 | 2014-02-18 |
| K131337 | 2013-10-11 |
| K123457 | 2013-03-22 |
| K103837 | 2011-03-24 |
| K090705 | 2009-10-09 |
| K060569 | 2006-07-06 |
| K031201 | 2003-07-15 |
| K020383 | 2002-05-06 |
| K994370 | 2000-03-24 |
Recalls Naming This Product
6 recalls name this product by its own identifiers, the 510(k) it is cleared under.
| Recalled by | Identified by | Initiated | FDA class | Root cause | Reason | Quantity | Closed |
|---|---|---|---|---|---|---|---|
| Ortho Development Corp. | 510(k) number | 2014-07-11 | Class II | Packaging process control | Ortho Development is recalling various Pivot Bipolar Cup, Patella, PS Tibial Insert, UC Tibila Insert, and CK Tibil Insert because the foil pouches did not properly seal, allowing air to seep back into the pouch after sealing which increase | 1 | 2014-10-06 |
| Ortho Development Corp. | 510(k) number | 2011-01-07 | Not classified | Error in labeling | Components of a replacement knee system could be mislabeled. | 25 units | 2011-12-27 |
| Ortho Development Corp. | 510(k) number | 2011-01-07 | Not classified | Error in labeling | Components of a replacement knee system could be mislabeled. | 14 units (US), 2 (Intnl) | 2011-12-27 |
| Ortho Development Corp. | 510(k) number | 2011-01-07 | Not classified | Error in labeling | Components of a replacement knee system could be mislabeled. | 33 units (US) | 2011-12-27 |
| Ortho Development Corp. | 510(k) number | 2009-03-19 | Not classified | Device Design | A component of knee prosthesis was assembled incorrectly. | 422 units | 2010-06-30 |
| Ortho Development Corp. | 510(k) number | 2009-03-19 | Not classified | Device Design | A component of knee prosthesis was assembled incorrectly. | 368 units | 2010-06-30 |
Recalls
6 of these are Class II. Class II means a temporary or reversible health consequence. Volume alone is not a quality signal: a manufacturer that ships more recalls more.
| Initiated | FDA class | Root cause | Reason | Quantity | Closed |
|---|---|---|---|---|---|
| 2019-05-30 | Class II | Nonconforming Material/Component | The locking mechanism of the tibial tray exhibited a manufacturing defect in which a uniform ridge was cut along the inner wall of the “T” and “Y” junctions, which may cause resistance when the Tibial Insert was being assembled. | 29 | |
| 2019-05-30 | Class II | Nonconforming Material/Component | The locking mechanism of the tibial tray exhibited a manufacturing defect in which a uniform ridge was cut along the inner wall of the “T” and “Y” junctions, which may cause resistance when the Tibial Insert was being assembled. | 27 | |
| 2014-07-11 | Class II | Packaging process control | Ortho Development is recalling various Pivot Bipolar Cup, Patella, PS Tibial Insert, UC Tibila Insert, and CK Tibil Insert because the foil pouches did not properly seal, allowing air to seep back into the pouch after sealing which increase | 13 | 2014-10-06 |
| 2014-07-11 | Class II | Packaging process control | Ortho Development is recalling various Pivot Bipolar Cup, Patella, PS Tibial Insert, UC Tibila Insert, and CK Tibil Insert because the foil pouches did not properly seal, allowing air to seep back into the pouch after sealing which increase | 14 | 2014-10-06 |
| 2014-07-11 | Class II | Packaging process control | Ortho Development is recalling various Pivot Bipolar Cup, Patella, PS Tibial Insert, UC Tibila Insert, and CK Tibil Insert because the foil pouches did not properly seal, allowing air to seep back into the pouch after sealing which increase | 11 | 2014-10-06 |
| 2014-04-01 | Class II | Process control | A femoral component containing pegs was found in a box for the pegless version. | 5 | 2014-07-14 |
| 2009-05-29 | Not classified | Mixed-up of materials/components | Erroneous lot number on 3 of 28 units of Balanced Knee System. Three units from Lot Number 0055245 were mixed in with the recalled lot (0054891). | 13 units | 2010-05-11 |
| 2003-09-15 | Not classified | Other | The guide pin which rotationally constrains the tibial punch within the punch guide, may fall out. | 27 | 2003-12-11 |
Source: U.S. FDA establishment registration and device listing records, public domain. Restructured for clarity and searchability. Not affiliated with or endorsed by the FDA. Records are records: nothing here is an offer of sale.